Reviews
OEM Product has been discontinued.
I bought this because I thought the speedometer was probably out of cable because it stopped displaying the speedometer. At first, I tried to purchase a Kawasaki OEM Product, but it was out of stock, so I was wondering what to do. After disassembling the unit, I found that the Cable was also out of order, so I replaced it with this one and the Speedometer worked fine. View detail
Fits: HONDA CB750, HONDA CB750L (license training vehicle)
To MAGNA50.
Cheap!
Fast arrival!
Good texture!
No complaints!
View detail
To STAR
Looks the same as OEM Product. Good cost performance. View detail
OEM Product suitability
I ordered NTB's Meter cable because I thought the cable was broken and the needle on the meter was not moving. I connected the Meter cable but of course the Meter needle did not move, so I had to look for a Meter gear. View detail
Worth a try before Meter disassembly.
Meter's needle started to tacho dance, so I replaced it.
I was prepared to go through the trouble of disassembling the Meter if this didn't work, but the problem was solved in one shot.
The outer skin is solid and I am satisfied with both price and effectiveness.
View detail
Fits: HONDA CB750, HONDA CB750L (license training vehicle), HONDA CB750L (license training vehicle), HONDA CB750L (license training vehicle), HONDA CB750, HONDA CB750, HONDA CB750L (license training vehicle)
… for cb750 rc42
Cost-effective!
Good quality, same as OEM!
View detail
Fits: HONDA CB750, HONDA CB750L (license training vehicle), HONDA CB750L (license training vehicle), HONDA CB750L (license training vehicle), HONDA CB750, HONDA CB750, HONDA CB750L (license training vehicle)
… for cb750 rc42
Meter immobilized during Touring ….
I quickly searched for it on webike and bought it!
Costa is too powerful www.
They are always helpful!
View detail
Fits: KAWASAKI ZrX-II, KAWASAKI ZrX-II, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S For Malaysia Market, KAWASAKI ZRX1200S For Malaysia Market, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZRX, KAWASAKI ZRX, KAWASAKI ZRX, KAWASAKI ZRX
It could be used outside of conformity.
It was installed on a Zr-7.
It is a little long, but when you put it on, you will not feel any discomfort.
View detail
Used for GOOSE350
Diversion of the product for GOOSE as there is no Other Brand Product for the car model.
Cable length seems to be slightly longer.
The Meter gear side is reluctant to move, so it has already been broken three times, but there are no dedicated parts, so there is nothing we can do about it!
Incidentally, Inazumaetc. made by the company can also be used.
View detail
Meter needle runout was not cured and was replaced.
Meter runout became so bad and unstable that it had to be replaced, and it was.
Easy replacement, no more runout and replacement
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R For Malaysia Market, KAWASAKI GPZ900R For Malaysia Market
Being kept in reserve.
I purchased this as a spare part for my beloved GPZ900R.
I hope NTB will continue to manufacture them.
View detail
Fits: YAMAHA TW200, YAMAHA SR500S, YAMAHA TW200, YAMAHA SR400S, YAMAHA SR400S, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500
Speedometer Cable Installation..
I decided to purchased this speedometer cable because of the low price.The build quality almost same as the OEM cable and OEM cable just a little bit pricey than the NTB version.It's been 6years since I first change my bike's(TW200) speedometer cable.So Time Has come to change it.At some times when I was traveling at a speed of more than 80 km/h, I noticed that the needle on the speedometer bouncing back just a little bit.I want to replace the old speedometer cable because I got a brand new speedometer cable from WEBIKE SHOP. Before I remove the old speedometer cable ,First I had to remove the headlight plastic shell and unplug the wiring connector then removed the headlight lamp.SO it was very easy to reach the speedometer cable and unscrew from the speedometer .Then squeeze the speedometer clip/ Remove small clip at bottom of cable housing and free the old speedometer cable from the groove in the brake panel..Before I installed the new speedometer cable ,pull speedo cable out of housing and apply grease (I had tube of waterproof lithium grease handy) to cable as your feeding it back in housing. turn and wiggle it back in all the way.apply a light coat of waterproof grease to the speedometer O-ring ( Brand new speedometer cable doesn't have an O-ring).Install the Brand New speedometer cable into the brake drum and then install the speedometer cable clip into the groove in the brake panel.make sure clip in right by gently trying to pull housing back out.Then need to tighten the upper cable that goes direct to the speedometer itself. 10 minutes Job .After installing the new cable speedo needle has no bounce and steady as a rock on smooth roads.AS ALWAYS THE PACKAGE ARRIVED ON TIME FROM JAPAN AND VERY NICELY PACKED.THANKS FOR THE SUPPORT WEBIKE.Awesome Online Shop.If anyone need parts for your bike Webike Shop is the Best place.Reasonable Prices and 5Star Shop. Cheers ! View detail
Diversion to VJ22A
Since OEM parts were discontinued and Oaktion products were expensive, we purchased this product, which was close to the year.
It is short, but it is working fine so far.
The bend is a little tighter, but not short enough to affect the Sus Stroke.
Now we just need to see how durable it is.
Wire1 pc, but it was a great help because when it runs out, I can't drive on public roads.
View detail
Fits: HONDA VTR, HONDA VTR, HONDA VTR, HONDA VTR, HONDA VTR
It is rather troublesome when it is cut off.
Purchased for VTR250 to use on VT250 SPADA as OEM Product is discontinued.
The workmanship is indistinguishable from that of an OEM Product and can be used normally.
We chose this one instead of the OEM one because of its slightly lower price. We always keep this one in stock as a spare in case of emergency.
If it runs out before you know it, you may not know the distance and may lack Gas. The most important thing is to take care of it on a regular basis.
View detail
OEM Product and Exchange
[How is it used?
Used for HORNET250; Meter needle was shaking, so it was replaced at the same time as OEM Product's Joint.
How was your experience with it?
So far, it has been used without any noticeable drawbacks or problems.
How did it compare to other products?
I think we can say OEM Product same etc.
[Points to note]
When replacing the HORNET meter cable, it is necessary to remove the tank, so some knowledge and tools are required.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R For Malaysia Market, KAWASAKI GPZ900R For Malaysia Market
Elegant quality. Inexpensive. Fast.
[How is it used?
While running, the Speedometer suddenly stayed at Zero, and when the Cable was removed, it was replaced because it was twisted off.
Chose this one because the OEM is discontinued and not sold.
Was the one you received as per Image?
Yes
Was the installation difficult?
No, sir.
However, it is difficult without any work experience at all, such as the need to remove the Meter.
How was your experience with it?
Normal. Perfect.
Very Smooth rotation.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
You can choose to do so with complete peace of mind.
With this Cable, you can ride all the way.
View detail
Fits: KAWASAKI ZZ-R1100, KAWASAKI KLE400, KAWASAKI KLE400, KAWASAKI KLE500
OEM Parts Substitutes
I ride it mostly for commuting. KLE250." But I was looking for an OEM Product because my Cable ran out.
But I can't find the OEM, so... KLE400." Purchase this product, which can be used in
After receiving it, he immediately took it to Motorcycle shop for replacement.
I thought what if the Cable seemed to sag, but it is Large sturdy even after driving 150km since the replacement.
View detail
Fits: HONDA VTR, HONDA VTR, HONDA VTR, HONDA VTR, HONDA VTR
You might need a Washer.
If the cable is attached as it is, the cable and GEAR will not be attached vertically.
You might want to bite the Washer etc.
View detail
Fits: HONDA CB900, HONDA CB900, HONDA CB900, HONDA CB900, HONDA CB900, HONDA CB750F, HONDA CB900, HONDA CB900
It went out fast.
After I bought it new, it was cut off in less than 1000km.
It is broken at the border of Wire and Bracket part.
I have purchased several of these and this is the only one that has broken. Was it a fluke? I don't know if it was a fluke or not, but I trust NTB and I'm disappointed.
I'd like to buy it again to check (is it an individual item?).
View detail
Fits: YAMAHA TZR50R, YAMAHA Renaissa (RENAISSA), YAMAHA TZR50R
OEM Discontinued Products
NTB is really helpful. View detail