Reviews
Slider installation
It is not cheap, but it has a good quality. After installation, I think the parenthesis has improved. I don't know how effective it is because I haven't rolled on it. The installation was done by one person, but it was a little difficult to tighten the wrench lever while pressing it down with my foot from the bottom because it is co-tightened from the Both Sides. View detail
Mounted on ZEPHYRX
The installation was easy, and the installation was done according to the instruction manual with the Torque indication. The engine looks quite large at first after installation, but I hope this will be enough to guard the engine. I will ride carefully so that I don't have to take care of this product. View detail
Mount slider ver.2
The product itself needlees to say, its solid and charming. Easy to install, looks cool. Gives protection to engine. Got whole set front, rear & engine mount. View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
For protection around Engine
It depends on how the pedal falls, but I think the Brake and Clutch pedals hit the ground first, so I thought it was too short to protect the Pedal.
I think it would be a good idea to install them with the feeling that it is better to have them.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Installed on a WR250R
Since I have Rear Sets installed, I installed them to reduce damage when the Footpeg breaks. View detail
Installed for '07 VTR250.
Design is good and I bought it for Style.
Although it is installation to VTR250, the hole through which Shaft passes under the front of Engine is Quantity:Pair (for Left and Right) I was able to install it easily because it is located in
However, as you can see in your impressions, you will need a socket wrench (better if you have a torque wrench too) and an extension bar for installation.
After installation, the engine area looks more powerful and I am satisfied.
I don't have to worry about it when driving, and I want to drive safely so that I don't have to take care of the Mounting Slider.
I bought it at a great price from webike sale, thank you very much.
View detail
Understand the function of the product before you buy it.
The product itself was convincing in terms of quality and shape.
However, it later occurred to me that the Mounting Slider would be effective when I was driving on paved roads and falling over.
It doesn't seem to be that effective in off-road falls and standing up....
I wonder if I have installed something unnecessary for most of my falls on the latter. That said, I now think of it as ” insurance ” against falls on the pavement.
View detail
It's pretty good
It is very stylish and I am very happy with it But when installing Left Side, Bolt was a little short and had a hard time to tighten Because it has not rolled yet, it is unknown whether it is protected, but the engine of Black to the body of White I think it looks good because Parenthesis View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
footpeg hits before ? ? ?
Mounting on WR 250X
Engine slider does not hit when football is killed and footpeg and Rear brake hit first.
It will be after the Rear brake is twisted that it will function as Engine slider ? ? ?
Too bad I think that things look good
View detail
Although it is an amateur, it was easy to install.
I do not know the effect because it is not moss, but I think it is a pretty firm product.
I like it because it looks good as well.
I think that it is better to have Torque wrench for tightening.
(Torque Torque was stated in the Instruction Manual)
View detail
It does not suit the SR.
It's better than nothing, like insurance. Originally it's a thing to slide the car body out of Course. It seems to be effective if it is light standing gobble degree. Quantity 14 mm Socket for installation : 2pc. Set If you have one. I am 1pc. I only had 14mm and 17mmNut installed.
View detail
Perfectly!
It's SEROWFI, but it's unbelievable, it came in in no time. It might be a pain if you do not have a long socket - - -
Wise GEARUnder Guard (Resin Type) And does not interfere with Power Beam!
View detail
Fits: DUCATI MONSTER750, DUCATI MONSTER600, DUCATI MONSTER900
It was bigger than I expected
I installed it in Ducati M 900.
I was able to Dress-up also to the old car.
I get a little space between Frame and Spacer
Processed with Seal.
I bought it at webike's Sale, but at the same webikeSale the next week I got a little
I was cutting prices. It is regrettable that it is kind of unpleasant.
View detail
It's for XG250 TRICKER?
Used in SEROW! (^O^) /
It's perfect as you read!
Perhaps the aimed falling Guard effect is
Of course there will be to be
Personally, I did not anticipate it
A similar Babyface made in the WR era
I was thinking when I was wearing things
"It gets hot as it gets hot" To.
That's right, I feel like there is some exhaust heat effect
I tried to purchase, especially to the air-cooled engine
I feel like it works quite well - - - ^^; - - - (Lol)
View detail
Parenthesis Nice design is installed...
This Ver. For II, Design thinks Parenthesis is nice, but Quantity : Pair (for Left and Right) Slider (For Design that was cut into hexagons) Because the opposite rotates together when tightening, it is difficult to position symmetrically looking good!
When hang closes to a certain extent Torque wrench (do not put too much force and the specified value of 49N / To put Torque at a stretch with "kyu" in nm).
That way, only Bolt turned well and the Slider was hard to co-rotate, so I could fix it well.
Also, this is a Slider to the last Why, as it is in another impule, standing gobble and when falling down (It depends on how to roll) I think that footpeg, Shroud, Silencer and Handlebar will surely hit the road.
We are not recommended if you are considering purchasing to prevent scratches when you fall.
Probably the Slider of another Manufacturer is also installed in the same position I think that the effect is nearly somewhat.
This is a characteristic of the vehicle - I think that there is no choice but to divide it as it can not be helped in Design.
However, it is enough for protection of Clutch cover and WaterLine also in terms of installation position, and if you think that you can purchase it at less than 8000 yen in the first place, classic Petit (Lol) I think that there is no loss even if it is installed as Dress-up parts.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
I've installed this part just in case. At first I was worried, for it looked big as one unit. But once it was installed, it became inconspicuous. Nice.It seems durable enough to protect the engine area when something happens. It is beautifully made, a
I've installed this part just in case. At first I was worried, for it looked big as one unit. But once it was installed, it became inconspicuous. Nice.
It seems durable enough to protect the engine area when something happens. It is beautifully made, and the aluminum coloring presents an image of high-quality. It will be convenient if you use a socket wrench for both sides. Also, you better use a torque wrench for the final tightening.
View detail
Fits: SUZUKI Glass Tracker Big Boy, SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy, SUZUKI glass tracker
I installed this to reduce damage to customizing parts due to accidental falls during tours. It's stupid to fall but if by any chance I do, it's important that I'll be able to drive home. Also, it will stop the vehicle from sliding at falls.
I installed this to reduce damage to customizing parts due to accidental falls during tours.
It's stupid to fall but if by any chance I do, it's important that I'll be able to drive home.
Also, it will stop the vehicle from sliding at falls.
The slider I installed is for Grass Tracker and Big Boys.
But I had no trouble installing it to GN125H.
I thought of purchasing an engine guard. But hesitated because it looked like an instruction car.
I chose the slider, all though it may have limited effects.
I thank the customer service person that informed me with information concerning mounting.
View detail
SLIDER50s in front and behind and simultaneous wearing. Attachment is easy although pains was taken over removal of pure Screw. Also making is solid.
SLIDER50s in front and behind and simultaneous wearing.
Attachment is easy although pains was taken over removal of
pure Screw.
Also making
is solid.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
It is attachment WR250X. It was thought to WR that a SLIDER50 was unnecessary. the time of reversing a reason -- a Handle, a Shroud, a Step, and all Mufflers -- it has come out from the SLIDER50. Therefore, I think that this SLIDER50 does not rub a roa
It is attachment WR250X. It was thought to WR that a SLIDER50 was unnecessary. the time of reversing a reason -- a Handle, a Shroud, a Step, and all Mufflers -- it has come out from the SLIDER50. Therefore, I think that this SLIDER50 does not rub a road surface even if it falls. It was a disappointment. View detail
Fits: KAWASAKI D-TRACKER [D-Tracker]., SUZUKI 250SB, KAWASAKI D-TRACKER [D-Tracker]., SUZUKI 250SB
Although the Axle Slider was also used, attachment etc. are not quite satisfactory considering a price. since I think whether it is reasonably priced although it is somewhat relatively cheaper than a Manufacturer besides -- * -- it is three.
Although the Axle Slider was also used, attachment etc. are not quite satisfactory considering a price.
since I think whether it is reasonably priced although it is somewhat relatively cheaper than a Manufacturer besides
-- * -- it is three.
View detail