Reviews
Bar handle has
I used to use 10cm Long on my HURRICANE Pipe Handlebar Kit, but it was too long, so I decided to use 5cm.
Clearance is just fine.
View detail
Fits: KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYRX
HURRICANE 10cmLong throttle cable
Long cable was replaced when the handlebar was replaced.
Handlebar is HURRICANE's POLICE2 type with 27mm up set up holder compared to NORMAL.
OEMCable was not enough, so we decided to use a 10 cm long cable.
I think it fits nicely without being too long.
The replacement was done by one person, without removing the carburetor, so it took more than 30 minutes to hook up the new roll of Cable,
The return Cable did not take that long, but it was a struggle.
View detail
Diversion to CB250F
I installed a ZETA handlebar on my MC43, and it was about 30mm higher, but the OEM tension was too tight, so I replaced it with a ZETA handlebar. 1 pc of pull was applied to the handlebar, and the direct feel was increased by adjusting the play and the handle.:Pair (for Left and Right) I let it have play at full lock. View detail
It was a little long.
Changed to Long cable due to change to Handlebar Up Type. It is a little long, but there is no problem in use. Conversely, the Handlebar can still be raised.
Installation was troublesome with the carburetor part.
View detail
it work very light and smooth
I bought Hurricane long throttle cable to replace the old on my Honda VFR800 VTEC 2003. Shipping time is a bit longer than 2 weeks after shipping. Hurricane throttle cable is Made in Japan, the cable is long enought to install on my bike, it work very light and smooth. View detail
good quality, perfect fit
Bought these for dragstar 1100 classic. The cables look to be of good quality and fit my bike perfectly. Don't forget to lube the cables before installing them on the bike. View detail
HURRICANE LongThrottle Wire GPZ900R
I received the product immediately after purchase and am very satisfied with it.
I'm sorry
View detail
Necessity for Handlebar replacement!
[How is it used?
Street Riding and Touring
I purchased this product because the OEMWire is no longer available due to the replacement of the Handlebar.
Used for FCR Carburetor Body.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Wire needs to be removed and adjusted. If you are familiar with maintenance, this will not be a problem.
How was your experience with it?
Accuracy and quality on par with OEM. The outer membrane is soft and easy to handle.
[Included Parts:were they on?
This product only.
[Was there anything that disappointed you?
None
Other items that would be helpful
important point
Please choose the corresponding Wire for your car model.
Opinions and requests to Manufacturer
I would like the length of the external membrane and Wire to be listed for each.
View detail
Bar handle conversion
Used to convert HURRICANE to bar handle with Kawasaki holder kit.
5 cm is better.
View detail
parts for handling
It's not yet installed, but it's the Hurricane z2 that everyone does.
I was going to ride it in the middle of the day, so it was hard to have a lot of power in the wrist part if you drive long distance . The Z2 steering wheel is more comfortable to drive.
I ordered it because it was possible. The packaging came meticulously well, very good. The above product is purchased for replacement because the existing parts do not have the length ------------------------------------- --------------------- It's still before it, but it's the hurricane Z2 that everyone does. I tried to ride it with a pure, so when I was driving a long distance, it was hard to have a lot of strength in the wrist. Z2 handles are more comfortable I ordered it because it was possible. The packaging came well. Wids are not long because existing parts are not lengthy, so purchase to replace Powered by Google Translator
View detail
Is good
When I cleaned the throttle body of my 2008 CB400SB, I decided to replace the Accelerator Wire as a precaution since the mileage reached 50,000 km. The reason why I bought the 50 millimeter long wire is because my BOLDOR is equipped with a HURRICANE Handlebar Up Spacer that can be used with the OEM wire, and the OEM Accelerator Wire is quite limited and there is no room to spare. After cleaning the Throttle body, I lubricated the wire before installing it, and then I put grease on the Thailand coil. I was satisfied with the length of the wire when I assembled it. I thought nothing special would happen, but I have several motorcycles and I can clearly see that the Axel pulls much lighter. I have several motorcycles, so I can clearly see that the pull of the Axel has become much lighter. I can twist the Axel without effort, and as a result, it is harder to get stuck. I have no complaints if I can choose various lengths and buy at this price with this quality. View detail
good product
it's product excellent. my motorcycle is mor beautiful and more complete. fast shipping. but little bit expensive. thank you. View detail
Fits: YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400
I couldn't pimp it
While acknowledging the lack of confirmation ….
The handlebar side plate shape was different, so it could not be popped on, so it was reshaped and reattached using Drill and Disc Grinder.
Well, I guess this is what Universal Product is all about.
View detail
The cygnus X FI 09 Taiwan sporty was attached and used. Although the die length of the pure cable was insufficient for the long wheel base, it was canceled with this product. It is recommended!
The cygnus X FI 09 Taiwan sporty was attached and used.
Although the die length of the pure cable was insufficient for the long wheel base, it was canceled with this product.
It is recommended!
View detail
I put it on my GPZ400R.
I ordered a new Throttle Wire (pull) for GPZ400R D2. 2 days later, it arrived and I worked on it at night after work.
Don't remove the carburetor, just remove the Tank and Seat!
The work efficiency is not so good, but if you get the hang of it, you won't mind. I post maintenance records on social networking sites. (It's messy.) If you are interested, please look for it lol.
As for the feeling, I have driven about 600 km and so far there is nothing to worry about. The impression is that it is a little hard.
Price, quality, I wonder if this will be Base. I don't know about durability, but Large would be sturdy!
View detail
Very good
They are better than stock, because of this multylayer sleeve. But on the other hand it's difficult to lubricate them. Ant they are long. For very high handlebar. Too long for my classic medium size handlebar. It's not a problem for me, but keep it in mind. View detail
very good cable
It is a cable currently used for the w800, but I bought it because I thought it was time to change the clutch and throttle cables. You'll use it well.^^ View detail
Throttle Wire replacement
I'm glad the product is what I thought it would be because it was a part I needed to replace. View detail
Products that do a good job.
I wanted OEM Parts, but they were already out of stock, so I bought them.
I was hesitant to buy it because it is 50mm longer than OEM, but I had no choice but to buy it for the above reason.
When I installed it and took it around, I didn't feel it was very long and felt it was good.
View detail
Are you sure that's the length shown?
I bought this product of 100mm long because the accelerator wire was stretched to the limit by 30mm up of the handlebar and it seemed to apply unreasonable force.
Long enough to reach Light's Lens when I replace it!
When you line up the OEMs, it looks to be about 150mm long. Definitely not 100mmLong.
It is ugly because it draws a large Loop in front of the eyes even if it is disagreeable because it is not possible to make a Route to turn other because the space that the space that Cable passes through is Limit in Motorcycle VTR250, and it associates with the antennae of the cockroach.
Longer is probably safer, but you're looking at too much leeway.
I'd like to return it, but there's nothing else I can do to change it, so I'll just cry myself to sleep.
View detail