Reviews
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, SUZUKI INAZUMA400, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, SUZUKI INAZUMA1200(GSX1200FS)
Riding position is easier
If it's a NORMAL CB400SUPER BOLDOR, my height is 167cm and I'm small.
I was leaning a little forward and my hips and wrists were getting tired when touring.
I was told about this product by the Motorcycle shop and purchased it.
A 17mm Spanner and a Hexagonal Wrench are required for installation, but
It is possible to install it without difficulty, and the cables can be left in NORMAL.
The essential riding position is about half of the handlebar diameter up and in front, but the
It was very easy.
However, the posture is now more upright, as you can see in this Motorcycle post.
The buttocks pain came out at an early point.
In the future, we are considering embedding Gel Zab in Seat.
View detail
Fits: YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250(SG03J), KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, HONDA FORZA(MF06), HONDA SILVER WING600, HONDA SILVER WING400, HONDA PS250, KAWASAKI BALIUS2, YAMAHA GRAND MAJESTY250, SUZUKI GSX250FX, KAWASAKI BALIUS, YAMAHA MAJESTY250(4HC), YAMAHA MAXAM, YAMAHA GRAND MAJESTY400
Limit, depending on the vehicle
ZEPHYR750 on a 2006, C6FAFull normal
HandlebarCenterPosition, Right turn no problem, Left turn Then the Accelerator WireCable moves and shifts to the bottom of the Front suspension The wire got caught in the sharp edges there and pulled, and the throttle wouldn't come back To prevent the wire from shifting downward when turning Left, it is fixed loosely with Tie Wrap However, because the original design is made to the Limit, it may cause problems in pontooning depending on the individual And you may have to be a little more creative with the models that fit
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, SUZUKI INAZUMA400, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, SUZUKI INAZUMA1200(GSX1200FS)
Patsu Paston
CB400SF NC42 (2016) Mounting on
I decided to attach it by the original bad because there was also a thing that the body was hard if I took it full lock.
Although it is wonderful that it can be used as it is with Normal cable, it becomes considerably patchpat when installing.
I took quite a lot of fun with Clutch Cable, but with this I almost got no play.
If it's normal playing ClutchWire will not run out.
Once, Floc is Quantity : Pair (for Left and Right) I can do it, but I am a bit worried.
I tried in the parking lot.
I feel that something has not changed much...
I will make a decision after running a little bit but I may return this to NORMAL.
View detail
Fits: HONDA FORZA Z ABS, HONDA FORZA(MF08)
Although he thought that it could do simply and being purchased, the work which shaves a little Holder Cover of a Plating with a File is needed.Although wavered at the beginning, it is a Cover of decisively a Plating... If it Attaches, the delete
Although he thought that it could do simply and being purchased, the work which shaves a little Holder Cover of a Plating with a File is needed.Although wavered at the
beginning, it is a Cover of decisively a Plating... If it
Attaches, the deleted portion is not conspicuous, either, and it will clean and will go up.Kana backed to
feeling this side?
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, SUZUKI INAZUMA400, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, SUZUKI INAZUMA1200(GSX1200FS)
although it is the height 175 -- too -- a long distance -- hot -- -- if it is this -- considering -- purchase. It became easy as expected. It is whether since a leeway which can fix a Clamp focusing on Handle was also given, the part in whi
although it is the height 175 -- too -- a long distance -- hot --
-- if it is this -- considering -- purchase.
It became easy as
expected.
It is whether since a leeway which can fix a Clamp focusing on
Handle was also given, the part in which O
object occurred, and a wind pressure of equip [ now / it / Navigation / in a smart phone ] increase...
View detail
Fits: YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(4HC), YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, SUZUKI GSX250FX, YAMAHA GRAND MAJESTY250, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, HONDA FORZA(MF06), HONDA SILVER WING600, HONDA PS250, HONDA SILVER WING400
It thinks that the Position of a Handle wants to make it rise strongly a little, and although it worried about whether the Handle is replaced with or a Handle post is put in, it serves also as a Dress-up of a Top bridge up, and purchases the Silver of
It thinks that the Position of a Handle wants to make it rise strongly a little, and although it worried about whether the
Handle is replaced with or a Handle post is put in, it serves also as a Dress-up of a Top bridge up, and purchases the Silver of this product.
It is the touch which rigidity went up from the pure Handle holder after exchange.
(They may be fancy.)
.) -- the improvement of a Position can also be aimed at, and since it is not so high although it is not necessarily so cheap in price, there is the Dress-up effect of a Top bridge up, and they are goods of a Recommendation.
View detail
Fits: SUZUKI INAZUMA1200(GSX1200FS), HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, SUZUKI INAZUMA400, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
Since putting a key did a few and it ran away, it stuck. Although it became easy to put the key of course, operation became easy by the upper-part-of-the-body Up of mere a few. I thought that it was that which is effective against the body
Since putting a key did a few and it ran away, it stuck.
Although it became easy to put the
key of course,
operation became easy by the upper-part-of-the-body Up of mere a few.
I thought that it was that which is effective against the body in it being unexpected.
View detail
Fits: YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(4HC), YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, SUZUKI GSX250FX, YAMAHA GRAND MAJESTY250, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, HONDA FORZA(MF06), HONDA SILVER WING600, HONDA PS250, HONDA SILVER WING400
Appearance and texture may call it shaving 出し and are very good goods. color can also be chosen with an Anodized -- a Point -- I think that it is high. If attachment is normal, it can carry out Pons attachment without change of Wires, such as
Appearance and texture may call it shaving 出し and are very good goods.
color can also be chosen with an Anodized -- a Point -- I think that it is high.
If
attachment is normal, it can carry out Pons attachment without change of Wires, such as an Axel Clutch.
The Bolt of the existing Handle post is removed, and since it is only changing for this product, it can change by the working hours for about 15 minutes.
Since the work itself is very easy, returning to a NORMAL freely is also possible.
, now this product would be those of the parts in connection with a Position, and I would like to attach and carry out in play to a Position.
Since I am height 170?, please refer to it.
Since it became a Upright Position and the margin was born to the upper half of the body when all were attached in the state of a NORMAL at the beginning of
, the management by town riding etc. became easy.
When changed into the sheet which shaved about 4 cm of red bean paste after that [
], the handle position became the impression which became high too much this time.
Since a Position goes up and the place and lower half of the body which were further changed into the Back step of BEET become easy to take an inclined attitude, it becomes an enmity that a Handle is high on the contrary, and they serve as a narrow Position.
Since, as for the
lower half of the body, the upper half of the body became a direction where the body occurs to the inclined attitude, a feeling of ギクシャク became strong.
Although the bearing surface went up by returning the
sheet to a NORMAL and the narrow feeling of the lower half of the body was canceled very much, the still by no means good Position was in the state which cannot be said.
, for this reason a Handle post were returned to the NORMAL.
Then, it changes to a moderate inclined attitude and becomes easy to straddle at a Corner.
Every Parts had a normal state assumed fundamentally, and was made, the effect conflicted, and a Back step and Up-Handle-ization were failures as a result.
We recommend you the purchase after considering how he wants
specification use and the said Position.
I returned and made the NORMAL the red-bean-paste omission sheet and the Handle post from such circumstances.
Since it thinks how it is that uses money vainly although it may be a Reasonable in a Parts simple substance, please refer to my experience.
honest about the
last about changing a Handle post into this product by a Normal position at commuting or town riding -- we can recommend you.
Although it is
, if the posture in a Cornering is thought as important by a Back step etc., recommendation will be impossible from now on.
View detail
Fits: SUZUKI INAZUMA1200(GSX1200FS), HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, SUZUKI INAZUMA400, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
He was short and it felt distantly by the Position of the NORMAL. In 12 mm of 17-mm Backs Up, although the kana ? which is not not much changeful is thought, it equips. It is completely different! It became easier than imagination.
He was short and it felt distantly by the Position of the NORMAL.
In 12 mm of
17-mm Backs Up, although the kana ? which is not not much changeful is thought, it equips.
It is completely different! It became easier than imagination.
View detail
Fits: SUZUKI INAZUMA1200(GSX1200FS), HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, SUZUKI INAZUMA400, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
Since the inclined attitude had not fitted only mere a few nicely, it purchases. Attachment is also easy and Cables remain as they are. Quite favorite Position! Since a few is protruded from the Top bridge, it is *4 piece.
Since the inclined attitude had not fitted only mere a few nicely, it purchases.
Attachment is also easy and Cables remain as they are.
Quite favorite Position! Since a few is protruded from the
Top bridge, it is *4 piece.
View detail
Fits: YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR1300, YAMAHA XJR400R, YAMAHA XJR1200, YAMAHA XJR1200R, YAMAHA XJR400
It attached to XJR1300 in 2005. Since a position change is made at a handy price, without exchanging cables, it is saved. Structure and alumite treatment are beautiful.
It attached to XJR1300 in 2005.
Since a position change is made at a handy price, without exchanging cables, it is saved.
Structure and alumite treatment are beautiful.
View detail
Fits: HONDA PS250, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100, HONDA FORZA(MF06), HONDA SILVER WING400, HONDA SILVER WING600, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI BALIUS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, YAMAHA MAJESTY250(4HC), YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY250, SUZUKI GSX250FX, KAWASAKI BALIUS2, YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250(SG03J)
Since there is also such usage, it is peevish, and it is ~*.
Since there is also such usage, it is peevish, and it is ~*. View detail
Fits: YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(4HC), YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, SUZUKI GSX250FX, YAMAHA GRAND MAJESTY250, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, HONDA FORZA(MF06), HONDA SILVER WING600, HONDA PS250, HONDA SILVER WING400
Although it had become structure extravagant with a choinori, since he wanted height a little, this was enough in size. Moreover, since there is also no attachment of a setback holder also difficultly, it only shuts with a hexagon head. It cannot
Although it had become structure extravagant with a choinori, since he wanted height a little, this was enough in size.
Moreover, since there is also no attachment of a setback holder also difficultly, it only shuts with a hexagon head.
It cannot be denied that had a close game although [ taking the screw cap, since the screw cap was carried out in order for the screw after several week run to loosen and to reshut ] whose bolting here was bad after attachment, and the special polished became a flawed article ...
For uniting and buying it although it is a problem of self-responsibility (smile), it is one article of recommended satisfaction.
View detail
Fits: HONDA PS250, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100, HONDA FORZA(MF06), HONDA SILVER WING400, HONDA SILVER WING600, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI BALIUS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, YAMAHA MAJESTY250(4HC), YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY250, SUZUKI GSX250FX, KAWASAKI BALIUS2, YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250(SG03J)
Although the waist became painful and considered the up handle to be -- by the riding posture liable to slouchy, exchange of a cable etc. was also needed and I thought that it was troublesome. Even if it saw up of a setback holder, and the back's size
Although the waist became painful and considered the up handle to be -- by the riding posture liable to slouchy, exchange of a cable etc. was also needed and I thought that it was troublesome.
Even if it saw up of a setback holder, and the back's size, it was only small, but when -- was thought, it purchased and it attached rather than having changed a cable, also with few sizes, the posture changed a lot and a long distance also became easy.
Of course, cables are OK with normal.
View detail
Fits: YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(4HC), YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, SUZUKI GSX250FX, YAMAHA GRAND MAJESTY250, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, HONDA FORZA(MF06), HONDA SILVER WING600, HONDA PS250, HONDA SILVER WING400
It purchased in order to reduce the fatigue at the time of entrainment. In the handle position of normal, since the waist became painful when it had ridden for a long time, it equipped with the SEBBAKKU holder. Although 27 mm of attached comment w
It purchased in order to reduce the fatigue at the time of entrainment.
In the handle position of normal, since the waist became painful when it had ridden for a long time, it equipped with the SEBBAKKU holder.
Although 27 mm of attached comment were raised and were backed 17 mm, even if the posture of the upper half of the body became easy beyond the numerical value and they had ridden for a long time, the waist became that they have a pain in less.
It was satisfied with the effect which exceeds anticipation.
Attachment was also able to be simplified freely, without also needing a cable extension difficultly.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, SUZUKI INAZUMA400, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, SUZUKI INAZUMA1200(GSX1200FS)
It attached to HONDA CB400SB'09. Although it was in description of item even with '08, it has equipped satisfactorily. OK is glad for cables to come out as it is. Although attachment was easy, 10 mm of 6 angle wrench is required for it. Wh
It attached to HONDA CB400SB'09.
Although it was in description of item even with '08, it has equipped satisfactorily.
OK is glad for cables to come out as it is.
Although attachment was easy, 10 mm of 6 angle wrench is required for it.
When it straddles instantly and a handle is grabbed, it is very much good touch.
If normal, there was trunk touch that the waist became painful for a while for anteversion, and power was tired of going into an arm, but the position after wearing became very easy.
When it is this, long-distance touring is also OK!! Going out is pleasure.
View detail
Fits: HONDA PS250, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100, HONDA FORZA(MF06), HONDA SILVER WING400, HONDA SILVER WING600, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI BALIUS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, YAMAHA MAJESTY250(4HC), YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY250, SUZUKI GSX250FX, KAWASAKI BALIUS2, YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250(SG03J)
The zephyr chi is equipped. He wanted change from normal and it purchased. It wavered [ How many colors are used? ], and although blue and purple were also worried, the black same after all as a body color was chosen. Since it is comfortable b
The zephyr chi is equipped.
He wanted change from normal and it purchased.
It wavered [ How many colors are used? ], and although blue and purple were also worried, the black same after all as a body color was chosen.
Since it is comfortable by having used the same color, I think that it was good.
Mind that the posture at the time of operation changed specially is not carried out.
First of all, normal could be carried out, and since it did not necessarily use, it was not thought that it became easy.
Attachment was easy, and since it did not need to exchange a brake hose for the thing of long, it was completed freely.
Since he wants change and it equips the circumference of a handle for the time being, so so satisfaction is carried out.
View detail