Reviews
Good build quality.
The mounting hole position was Exactly.
Only the orientation of the bracket holding the Rear Brake hose was changed.
Black Gel Coating, so it is painted before installation.
View detail
Is good
Installed on a TZr50R. I was informed of the delivery date when I placed the order and it took about 2 weeks to receive it. [Color] The OEM Chain Cover and Brake Hose Bolt was removed because it interfered with the OEM Chain Cover and Brake Hose, but the Chamber and Brake Hose seemed to hit each other, so the Hose was fixed to the Fender's Mesh with Tie Wrap. I am satisfied with the new look of the Rear. View detail
Fits: HONDA Ape 50, HONDA Ape 100, HONDA Ape 50, HONDA Ape 100
Since the friend attached, it purchased. Attachment is dramatically easy and easy also for beginners. After attachment became very smart! It is admiration up custom rather than changing a muffler! Please try! In the direction which has rem
Since the friend attached, it purchased.
Attachment is dramatically easy and easy also for beginners.
After attachment became very smart!
It is admiration up custom rather than changing a muffler! Please try!
In the direction which has removed the exhaust air cleaner, it is recommended further!!
View detail
be fascinated by
Although it is a part that does not need to be installed, I did not expect such a drastic change in impression with such a simple installation. I can say with confidence that the parenthesis is too good. The installation is super easy, and it takes less than 10 minutes if you have a driver&Spanner&Pliers. The only thing I am worried about is that the area around the Sprocket is mesh and the clearance with the Chain is about 5mm, but it is around the Sprocket, so it should be large enough, right?
Paint "As a paint base..." but I would like to keep it that way for a while.
If I had to ask, I'd say another 20-30mm longer.
View detail
splash of mud
Rear tire mud splash prevention, looks good, so this is installed.
Works great for rain, puddles, and mud splashes.
It is a nice product with a nice look and feel.
However, the fixation method, Tie Wrap, is not quite right.
It is unfortunate that no consideration is given to prevent scratches from mounting and vibration.
Was it a bit unreasonably fixed? Long-term use seems to cause Cracks to enter without being noticed.
If the fixing method, scratches and cracks caused by vibration were taken into consideration, there would be nothing to say about this product.
View detail
Custom motorcycle requires ingenuity.
If it is OEM Exhaust System, it may not hit, but because Exhaust System was exchanged, the product was caught between Swing Arm and Exhaust System, and when Suspension contracted, it made a creaking sound, but when Aluminum spacer was put in Tandem hook which fixed Exhaust System, it was perfect. However, when I inserted the aluminum spacer into the Tandem hook which fixed the Exhaust System and Offset the Exhaust System, it was perfect.
It is necessary to devise the installation according to the state of the motorcycle, but the state that puts it on is Parenthesis good.
View detail
Saitaniya Rear Fender
Too bad about the mounting system!
The first tank end I bought didn't match the machined hole positions at all, and the tank end was a forced fit.
Rear Fender is likely to be cracked if you install it with the holes aligned.
I don't use it, there is too much space between it and the Swing Arm.
Cancellation is not possible and I do not want to buy again.
View detail
It is indeed made by a famous manufacturer
Installed on a 2019 YZF-R25
Installation was as simple as removing the OEM Chain Guard and fitting it in there
The texture is very good and the accuracy of the installation is also very good is coming out well, I bought the Black Gel one, so I'll paint it eventually! I think
View detail
good shape
MT-03 is not compatible, but it can be installed
I was looking for the longest possible Fender length and came up with this product
If you have a NORMAL rear brake, you can use the Bracket for fixing the Brake hose Just bend the claw in the opposite direction to attach the Hose Bracket
View detail
It's the best parenthesis and most practical for VTRs
Since the rear suspension was replaced, I installed it to prevent contamination
As the title suggests, it looks like a Gal arm and Parenthesis is good
It has a Chain Guard and of course a Sprocket Guard
It's rare, but it's possible to get your toes and hands caught in a fall and have them amputated, so it's a must in a race It's a safety measure, so it's better to have it on public roads than without
Because of the length of the Fender itself, mud splashes are suppressed considerably, so the rear suspension It's very helpful because it makes it harder for me to get dirty
Installation seems to be easy if you remove the Tire, but I had to take it off
If you jack up from the rear stand and the bottom of the engine, the suspension will extend to meet the Tire It gives you more space in the vehicle and you can manage to install it without having to remove the Tire
You don't have to remove the rear caliper as per the instruction manual, but The Hose Clamp must be removed and floated once
It is important to note that the clearance of each part after installation is narrow and the quantity:Pair (for Left and Right) If you don't check the centering of Fear
Recommends checking and adjusting the chain extension as well
After installation, put the engine on once in the state of being raised in the rear stand and let the Tire idle Check whether chain and Tire are not interfering with Axel on/Off (This is the biggest thing.)
I didn't cut corners and because I didn't do it, I just bought a test run and Chain interfered with it out of nowhere Some of the holes have been left out (Lol)
View detail
It is not good.
The installation accuracy is the worst..
I divert OEM's Rubber and Screw,
As it is, the gap between the product and Swingarm is quite free.
It is a rather disappointing finish just because the texture and shape are good.
View detail
I am satisfied overall as an individual.
Inner fender wanted to install from before. Various from various companies have been released, but I wanted a long item of Chain cover and I tried it with Mr. Gendaiya. (In order to save labor of painting Material : Carbon Style)
Regarding the installation, we made a process such as scraping the gold tool that stops Brake hose. (My car is an ABS car)
Other than that it was possible to install without problems.
I do not know the effect yet, but under Seat it seems to get less dirt!.
View detail
Attention to Rear brake
I installed it in HORNET 250. Black Gel As it is, I think that it can be used without problems until it fades. The installation was easy without having to remove the Tire. However, since Brake hose interfered with the corner of Fender and Brake's handedness became worse, I handled the interference part with File and handled it. Design likes it because there is a difference with other Manufacturer's Rear Fender. View detail
It is quite good!
I purchased from the other Manufacturer 's Under Cowl that it was made for a long time.
If you remove Tire, it will be easier...
I installed it with lining clothes because it is a pain..
When the car bounces, it will inevitably interfere with the Accessory Case under Seat.
Because each one gets scratches, I cut off the bicycle Tube and stick it at the interfering position.
A little price is stretched but I think that it was good shopping.
View detail
It can be installed in Swingarm of Gcraft
It is for NSR 50, but it can be installed with KIJIMA 's Plating Tie Wrap to N - Craft' s NSR Linkless Type Swingarm Monoshock Triple Square with Stabilizer 0 cm Long.
Be careful as it will interfere with Tire unless the mounting position is set to be more than the traveling direction Front.
View detail
Mounting on VTR 250 '07
Installation is simple. Remove the original Guard and stop Brake hose If you also remove Screw, just put on it. Easy to remove.
The appearance is cool, and the dirt under Seat has also been improved somewhat. It looks rather dirty than the appearance Custom element is Large.
Tire makes things that are relatively big and big, but I can afford it at all.
Chains will interfere with steps etc.. As long as you do not mind, if you increase Sprocket to Large, not only the sound but also the Fender itself can be trimmed, so if you install it, it may be nice to turn on Sprocket Small.
I do not mind, so I'm attaching Large Yi.
View detail
I decided to installed this part by looking at customer reviews. About the part finishing; the surface of inner portion, hitting the arm, was really rough, so I filed it to make smoother. Moreover, the edge was still too sharp, so I re-finished by
I decided to installed this part by looking at customer reviews.
About the part finishing; the surface of inner portion, hitting the arm, was really rough, so I filed it to make smoother. Moreover, the edge was still too sharp, so I re-finished by sand papers to round off.
About the installation; I needed some modification since I have the XR100 motored swing arm.
I cut part of the mesh portion in order to match the hook location for the brake hose mounting.
This is 4cm longer than APE standard and so the wheel shifted back accordingly. This created bigger gap between the fender and wheel which I did not like much, but I could installed nicely at last.
View detail
I installed it to my APE100 although this is for NSR50/80 originally. I have the OEM fender but it'll be removed and I wanted to prevent dirt to the shock portion, so I decided to install this rear fender. No modification added, just tie
I installed it to my APE100 although this is for NSR50/80 originally.
I have the OEM fender but it'll be removed and I wanted to prevent dirt to the shock portion, so I decided to install this rear fender.
No modification added, just tie by a cable tie.
so it took 5-10mins, very easy.
It interferes to the OEM chain guard,
so if you put the chain guard, you need to cut the fender partially. And actually I did so and mounted.
I am happy about both looking and practical use.
View detail
It is used for Ninja1000. attachment does not have the necessity for processing, either and was attached simply. Dirt of after [ attachment ] of a sheet flesh side also decreases, and appearance also becomes intrepid and is carrying it out
It is used for Ninja1000.
attachment does not have the necessity for processing, either and was attached simply.
Dirt of after [
attachment ] of a sheet flesh side also decreases, and appearance also becomes intrepid and is carrying it out to mind.
View detail
Ninja1000 is equipped. It became somewhat longer than a pure Fender, and appearance also became stylish touch. Although the Clearance in particular of attachment was also satisfactory, a Rear brake hose interferes for a while.
Ninja1000 is equipped.
It became somewhat longer than a pure Fender, and appearance also became stylish touch.
Although the Clearance in particular of
attachment was also satisfactory, a Rear brake hose interferes for a while.
View detail