Reviews
good quality goods at a low price
It was very inexpensive for Carbon and was thick enough!
The edge finish is a little rough in some areas, but for the price, it's acceptable.
You can polish it with Paper and
View detail
Hole position is perfect.
[How is it used?
I came across this product after searching for a variety of products because the XJR400R I purchased did not originally come with a front fender.
I would have preferred OEM, but buying a used one would cost about 5,000 yen or more, including shipping! So we chose STING R&D products, which had been used in different models of cars.
Was the one you received as per Image?
The carbon grain is beautiful when viewed from the front.
The reverse side is FRP, so only the surface part visible from the front is covered with Carbon.
The edges are a little rough in some areas, but at this price, it is acceptable.
Was the installation difficult?
The XJR400R was easy to replace because the Tire could be replaced with the Tire still installed.
The front fork has a clearance and 4 hole positions that are perfectly centered, so it can be installed without difficulty.
However, the hole size is too small to accommodate OEM colors.
If a collar is to be inserted, the hole must be expanded.
How was your experience with it?
I chose the twill weave Carbon type, and I am quite satisfied with the appearance.
It turned out to be Style as I had expected without any particular cheapness.
The hole for the cable guide was also well drilled.
[Included Parts:were they on?
Front Fender only.
Bolts and colors are required separately, of course, so it would be better to have the original or OEM parts.
[Was there anything that disappointed you?
There were some problems with the edge treatment and hole Size, but considering the price, it is acceptable enough.
【Review】
It can be installed on XJR400R without any problem.
I am generally satisfied with the product, although there are some compromises that need to be made for the price.
Also, Webike did not have it in stock this time, but I received it within a week.
View detail
Carbon fender and side cover
Since we switched to carbon side covers, we also changed the front fender to carbon.
I was able to install mine without modifying the Side cover or Fender.
I think the Fender mounting bolt will be replaced by a different length.
View detail
Carbon Front Fender for R1-Z
The black texture of the carbon matches the white color of the R1-Z, and the impact of the look is considerably different.
The strength is also Carbon, so it is lighter and has a better texture than OEM.
[Color] Clear finish, but again by myself for UV protection. [Color] It is likely to be more durable if it is installed after clear coating.
It is more secure to remove the front tire for installation, but if you are prepared to get scratches and try to force installation, you can manage to install it.
View detail
Can be used for DUCATI SS and Initial ModelMONSTER S2
It can be used for the 900SS, 750SS, and Initial ModelM900 of the 90s. Many of the exteriors for older models are no longer available, but we appreciate your support. View detail
Cospar good
I bought this as a replacement for my OEM Fender that I broke in a fall.
The OEM shape is the same as the original, so it can be popped on.
For installation, Nut cannot be used, so it must be prepared separately.
Also, note that the R1-Z requires the front wheel to be removed to remove the fender.
It has enough texture and I like it.
View detail
Fits: YAMAHA TZR250 3MA upright type, YAMAHA TZR250 3MA upright type
The thickness of the mounting part is a little thin
Mounted on a RZr with 3MA feet.
When I installed it, the width was a little narrower than the actual size, and I felt like I had to tighten it while spreading it out, but there was no problem installing it, and the accuracy came out well and I was able to install it straight.
The thickness of the mounting part is much thinner than OEMFender, and I couldn't fix it even if I tightened it to the root with Bolt which I had been wearing, so I fixed it by biting SiliconWasher which I have.
I don't think changing to a shorter Bolt would cause any problems.
I was grateful to be able to buy Reasonable because the used ones in good condition are expensive in discontinued Parts.
View detail
Inexpensive Parenthesis
Front side is Carbon fiber and Reverse side is Glass fiber.
The so-called Wet Carbon
Still, the product is satisfactory in both appearance and accuracy!
Installation on GSF1200
Just remove the OEM Fender that is bolted to the Front Fork Stabilizer and put it back on!
However, there is a reinforcement plate on the FenderReverse side, which could not be fixed with double-sided tape due to the unevenness of the glass fiber.
I used masking tape to hold it in place before I installed it.
I was optimistic that the Masking tape would come off while I was running.
View detail
Fits fine
Purchased as a replacement for an OEM Fender due to age-related deterioration.
I was able to install it as it is without any special hole processing. However, because there is no color of the genus Gold like the OEM Product, I think that there is a little hang to the alignment of the Mounting Bolt.
The appearance is also Carbon style and looks good, and it became a tight appearance with Black.
It will be large and durable for a few more years.
View detail
Bolt hole position is incorrect.
OEM Front Fender and Right rear bolt holes are in different positions and could not be installed.
We asked for a replacement, but it was returned to us without question.
The manufacturer says it is the same as the OEM Product, but our own 2Quantity:Set Front fork is also an OEM Product and doesn't fit into either of those categories, so I can't support the manufacturer's claims at all.
View detail
Carbon Style.
Material:Although it was written as Carbon, it seems to have only put Wet carbon on FRP at the front side.
Accuracy is poor, so if you drill a hole in the large texture, the installation will be smooth.
Large in sturdiness, this Carbon is easily drilled.
View detail
Cost-effective?
The quality is good for the price!
Carbon is also in use beautifully and has no problems I think it's a good idea to ask the Shop to install it or two people to do it
View detail
There was distortion. Individual difference?
I purchased it with reference to good evaluation of COSPA.
Quality is satisfying with price.
The texture of Carbon is beautiful.
However, when I installed it, something does not work. If you look closely well FenderBody has some distortion Quantity : Pair (for Left and Right) There was a difference of only a little less than Mounting Bolt of. Although wearing was possible as it was, it was not convinced, so I looked at it from the front Left Side Biting Spacer on Mounting Bolt Quantity : Pair (for Left and Right) Hitoshi etc. It was mounted at the height of. Result Calm down to the feeling that distortion does not matter. A person who needs Quality of OEM Product needs a little care.
View detail
Both appearance and cospar are Very Good!
Products made by Sting R & D company are of course not only looks, but since the Gold amount of the buyer's eyes is set even among Motorcycle Parts Manufacturer who is circulating with a high price more than anything else, since Dress-up can be done without stretching up, the search ranking in the future I am thinking in 1st place. This time, I think that the purchased product is one item of Recommendation even if it looks comprehensively without the necessity of processing. View detail
The price
OEM Replacement Type, but the width and mounting hole position did not match. For width it is possible to install if it is prepared for deformation, but it is safe to put a thick RubberWasher or something in the gap between Body and Fork. I am one Side 5? (Quantity : Pair (for Left and Right) I wrote a Rubber Seat of 1?). Even this still has some margin (>_<). As soon as you set the taking hole as it is, it gently becomes an off car Fender Since the position became high, 2 on the F side and 2 on the R side. 5? I opened the hole upwards and managed somehow normal installation. Since the original size was adjusted, the original hole on the F side can see an elliptical shape that has been scraped, but now it is one so I will refresh the lower part of the Fender side as well (T_T) It is cheap and its shape is not bad with the OEM but it can be made a bit better ~ " (-""-) " View detail
Large whispering yoji ...
By saying "Other Company Product", it is clearly stated as two Nuts, but I hate direct Nut hitting Carbon fender, I removed Bracket from OEMFender and ported it perfectly to Front fork etc. etc. Despite being tightened to, the Tire clearance before and after is Quantity : Pair (for Left and Right) Asymmetrical and immediately removed.
I sent a wearing image and asked for a replacement but I am sorry to refuse Bassari when I can not exchange after processing.
Material : Carbon products are prepared to individual differences, but just spreading the mounting hole in the hole of OEMBracket has no reason to cause a whirlpiece, which is not unpleasant, but I will never buy it again. Those who buy it because it is cheap are advised to check with the Manufacturer recommended way of attaching and checking if there is a whirlpool and to put in Objection.
View detail
Cost performance It is high !!
The OEM Fender installation part has broken and it is a replacement.
Although it is a translation to replace OEMFender when installing, OEM will interfere with Fork when removing. And it was possible to put in this product with little interference..
It is an impression that it is because it is thin with Carbon?.
Also in the OEMFender there is something like Stubby made of iron, I am addicted to the mounting hole from the back.. This item has good hole position precision, it is very convenient!
Fender Outside Material : The accuracy of the mounting hole of AluminumStubby is also naturally good, but there is a gap between Stubby and Fender. Even if you look closely at product pictures, there are gaps, so it's like this is not it!. I wanted you to be hooked as much as possible, but I guess it would be worthwhile considering the price ....
And AluminumStubby has a hole to catch at the rear center, but Fender has no hole. Also there are no mounting holes for parts to pass through the Meter cable, so you need to open a hole if you care. I just installed it, but it seems there is no problem in use.
Finally, there was also in other people 's impression, but when it hits the sun, parts that can be seen are seen there so much !! I became worried and painted with a matte black from the back and solved the sheer.
There are parts to worry about, but considering this price there is no problem at all !? (Lol)
View detail
Very light
Purchase at Cospa. Carbon twill is beautiful in the table.
There is a place which is transparent to Madara when passing light from the back, it is transparent
We reworked the part from behind with Paint. Without it
Wonder if it was five stars..
View detail
very poor quality . dimples and marks in the finished carbon face . over lapping cut marks where the mudguard had been cut for where the folks would pass through it . would advise spending a bit more money and receiving a much better quality item
very poor quality . dimples and marks in the finished carbon face . over lapping cut marks where the mudguard had been cut for where the folks would pass through it . would advise spending a bit more money and receiving a much better quality item . very cheaply made mudguard but yet wasn't cheap to buy . View detail
[ -- the WEBIKE Monitor ] -- since it was cheap -- purchase. A Carbon eye is beautiful. Of course, it is light. The bad point of processing of two and a Bolt hole is coarse. -- If it attaches, it is not just going to be visible. Another is t
[ -- the WEBIKE Monitor ]
-- since it was cheap -- purchase.
A Carbon eye is beautiful.
Of course, it is light.
The bad point of processing of two and a Bolt hole is coarse. -- If it attaches, it is not just going to be visible.
Another is touch that a Fender is pulled, when the width of the Fender bolts up the Bolt more narrowly pure at the time of attachment.
Intensity is [ whether it is OK and ] an uneasy place.
Since it is the design only for a vehicle type, an improvement is expected.
View detail