Reviews
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr 400
17in. can be assembled on a Fender Fork with a mounting width of 145mm.
Mount position is deep and Rib thick seRear ni (For Sera) This part is useful when putting 17in. on Fork.
It will probably also work well when putting 17in. on Bevel or PANTAH's upright marzocchi.
Basically, Front Fenders for 17in. cars are often designed with a width of 150mm or more.
Therefore, it is very difficult to find a suitable Fender when installing a 17in. on a Cearni assembled with a Bracket of Span 205mm or less.
That said, if you build a for 18-InchesFender, which has a wide variety of settings in the 140mm range, on a 17-Inch wheel, the first thing you will not get is a vine.
Thankfully, this model by BEET is for 17-inches and 140mm wide, so it can achieve this purpose.
Design is nice Parenthesis. At my own risk, I can wear a FTire with a width of 120 with room to spare.
The disadvantage is the Duck Tail shape at the rear end, which is good for parenthesis and aerodynamic, and it is not a problem to use on ZEPHYR400. and Garbage will hit the cooler core.
It is a Moro sand cover seat in position. A return must be welded to the lower edge of the cooler to prevent damage from Core.
Personally, I would be more than happy if you could sell a MODEL without mounting holes.
View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr 400
It was worth the wait.
Almost two months since I ordered it, and it was worth the wait!
Oak Auction and other sites were selling them at or above list price, and Manufacturer's delivery time was 4 months or more.
I doubt that anything that says BEET style or BEETManufacturer product is true...
I still decided to wait for Fender, a reliable Manufacturer.
However, I was lucky enough to get it in half the time, two months, and finally my Motorcycle is approaching its ideal state.
The effect is that it changes the appearance of the product to a large one. It works. We are pleased to be able to offer this service.
The work itself is not particularly difficult, just removing and replacing the OEM front fender.
It is currently being sent out for painting and we will add photos when the painting is finished.
View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZRX400II
Painted on Ebony
By making it a Racing fender.
The front area has become sharp.
The paint job was also done by DAYTONA's MC Painter.
Painted in Ebony color
[Color] After spraying Clear, leave it for about 3 days and
I finished it with Compound.
I'm very happy with it
View detail
Was good
I'm so glad I bought it, it's well worth the price! View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZRX400II
ZRX400 was equipped with the racing fender of BEET. The pure fender which does not suit the arch of the tire greatly was disagreeable, and purchased. since there is only a white gel, or it carries out private paint application -- paint application
ZRX400 was equipped with the racing fender of BEET.
The pure fender which does not suit the arch of the tire greatly was disagreeable, and purchased.
since there is only a white gel, or it carries out private paint application -- paint application -- it must begin to be alike.
He applied by can spray.
It is satisfied with a small and racy fender!! Does front fender appearance become good with GUTSU? A tire also looks good and is smart.
I think that it is the one where a price is also cheaper.
View detail