Reviews
Fits: YAMAHA NMAX, YAMAHA MT-07, SUZUKI GS125, KAWASAKI VulcanS, HONDA Rebel300, YAMAHA NMAX155, SUZUKI BURGMAN200, HONDA REBEL250, HONDA SUPER CUBC125
An essential companion for RAM Mount
[How is it used?
Now in use on a commuting motorcycle, clipped into a Mirror mount.
Was the one you received as per Image?
Included Parts:Included, as per product page
How was your experience with it?
The paint on the product was smooth, with no errors depending on the location. The large size of the hole was as indicated and no modification was required.
[Points to note]
When the last fixation is done, it may turn around, so it must be held down.
How did it compare to other products?
No comparison products
View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, SUZUKI GS125, KAWASAKI VulcanS, HONDA Rebel300, YAMAHA NMAX155, SUZUKI BURGMAN200, HONDA REBEL250, HONDA SUPER CUBC125
Perfect maintenance of leather products with just this one product.
[How is it used?
We use it for all kinds of leather goods. (Connections, Gloves, Jackets)
Was the one you received as per Image?
It came exactly as described on the product Page.
How was your experience with it?
I soaked it in the provided Towel and rubbed it lightly, but it soaked in without discoloration. The black colored areas looked more luxurious with a black shine when I checked them after wiping them. The nourishing ingredients in this product are also expected to extend the life of leather products.
[Points to note]
It can be difficult to tell if you have unfinished work, so please work on it so that you do not forget where you have done it.
How did it compare to other products?
It is really easy to do everything with just one of these.
Since there are many places to wipe up the joints etc., it is helpful to spread them out in the second half of the process with Spray.
View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, SUZUKI GS125, KAWASAKI VulcanS, HONDA Rebel300, YAMAHA NMAX155, SUZUKI BURGMAN200, HONDA REBEL250, HONDA SUPER CUBC125
just right
I bought this product because I replaced the Handlebar and the Mount I was using before could not be installed anymore.
Installation was easy with the Mirror bolt.
I was able to place it in just the right spot so I could easily see my phone.
The product itself looks cheap, but the plastic part is thick enough to resist cracking.
View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, SUZUKI GS125, KAWASAKI VulcanS, HONDA Rebel300, YAMAHA NMAX155, SUZUKI BURGMAN200, HONDA REBEL250, HONDA SUPER CUBC125
It's nice
When I fix my phone around Handlebar, I have to move my eyes down, so I always fix my phone around Mirror so that I can move my eyes as little as possible.
I think that this consumption is very good because it can be fixed firmly with a small space because the Parts itself is also small.
View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, SUZUKI GS125, KAWASAKI VulcanS, HONDA Rebel300, YAMAHA NMAX155, SUZUKI BURGMAN200, HONDA REBEL250, HONDA SUPER CUBC125
Smartphone Holder for Scooter
I'm buying RoseRose, so Quantity:It is an impression in Set.
At family reQuest, I decided to install a Smartphone Holder on VESPA Prima Vela 150.
I bought a Base, a Short arm (I thought it would be a hindrance if it was a long arm on the Mirror mount) and a Smartphone Holder from RoseRose.:There was no Set sale.
RAM-HOL-UN7BU with tether for XGrip Smartphone
・RAM-B-201U-A Short arm
・RAM-B-252U MirrorFrame base 11mmBoltfor Hole
Fast, I ordered at midnight, but it was in stock and I got it the next day.
Now for the installation:。。。。
Oh, Mirror's slot is retracted, and friend tightening is not possible. ・・・・Mirror Bracket diameter was only checked on the Net, and it was a mistake to buy it on a hunch.
Then, I change my mind and decide to buy Base to be attached to Mirror Bracket. On the spot, I bought Petit. This time, for the sake of caution, I measured Mirror Bracket diameter with Caliper and chose Base which can be attached to Beauty eye.
RAM-B-408-37-62U Bar Mount base bar
I knew it was in stock and it arrived the next day. It's a good thing that it's the holidays.
Now, since four kinds of Spacers are included according to the diameter, I chose the Spacer which fits the most after wrapping the included Rubber. This Base has a Hexagonal Wrench in it, so you don't need to do anything. (I think that I usually have it, so I don't need it. (I don't need it because I think I usually have it.
Tighten the screw and put it in a good place where Arm can be attached, and Base is over.
It's very sturdy, even though it looks unreliable at first glance. If the rubber of the part to tighten the phone deteriorates, it may become slippery, but since it is new, it does not slip at all.
By the way. "Bar Mount base bar. There was a Parts Structure diagram and a brief explanation, but nothing else. The Holder had a Rubber on it and I thought it must be used like this. The Mount base bar had a Rubber on it so that the One Side could be glued on. I was sure that I would have to wrap it first so that it would not move. It's easy to install, but I'm imagining it. I'm sure it's right.
Well, let's install USB power supply next.
View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, SUZUKI GS125, KAWASAKI VulcanS, HONDA Rebel300, YAMAHA NMAX155, SUZUKI BURGMAN200, HONDA REBEL250, HONDA SUPER CUBC125
The good?
Mirror installation Screw on Handlebar "M10. For.
Although it is a mirror co-tightening, it is about 3mm thick, so if you want to change to a bar end mirror, BlankScrew L=10mm. is too short to use.
View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, SUZUKI GS125, KAWASAKI VulcanS, HONDA Rebel300, YAMAHA NMAX155, SUZUKI BURGMAN200, HONDA REBEL250, HONDA SUPER CUBC125
Right on!
This is good, it fits the 10mm Mirror including the Clearance.
It's light and bulky, and the texture is solid. I'm satisfied with the overall compactness and high quality even with the full RAM set including Arm.
View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, SUZUKI GS125, KAWASAKI VulcanS, HONDA Rebel300, YAMAHA NMAX155, SUZUKI BURGMAN200, HONDA REBEL250, HONDA SUPER CUBC125
Easy to use
I bought it to co-tighten Mirror, but when I put it on Mirror, the position of the phone is too far outside to see, so I put it on Handlebar Riser.
Because the Screw of Handlebar Riser is 8mm, I thought that I should have made 8mm for hole, but I made Spacer and somehow installed it. And since I needed a Spacer to fill the hole anyway, I don't think the hassle was that much different.
I'm using it backwards for optimal positioning of my phone, and the distance between the ball and the mounting holes was just right and easy to use. Maybe it just happens to fit my Motorcycle.
The RAM MOUNT Smartphone Holder is pricey, but I still prefer this product for its sturdiness and secure fixation.
View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, SUZUKI GS125, KAWASAKI VulcanS, HONDA Rebel300, YAMAHA NMAX155, SUZUKI BURGMAN200, HONDA REBEL250, HONDA SUPER CUBC125
Required for ActionCam Items
There is no space around MT-07 Handlebar.
It is this product to appear there.
It fixes in a form to let it pass through the Bolt part of Mirror.
Well, not only Mirror but also other places.
I am using it to fix ActionCam
View detail