Reviews
Tank Pad installed
I mainly do circuit running and it is very easy to get a good knee grip. View detail
Both ends float away
The Silhouette of the NINJA2 Helmet 50R's Tank when viewed from the side I didn't like it, so I bought a Tank Pad with a Type that extends the Tank end
I am satisfied with the Silhouette right next to it because it is right on target It's awkward because it floats more than 5mm at both ends
Double-sided tape is also pasted on the reverse side of both ends, so the top of the I tried to hold it down from and keep it from floating, but it flaked and floated over time
I reapplied it three times, fine-tuning its position, but it floated away after each one, so I gave up and floated away I used it as it was
It didn't come off and fly off during the ride, but I'm a little concerned
I don't know if I pulled the HaGap product by accident or if it was originally like this, but I'm not sure if it's because of the floating ends I replaced it with another company's Tank Pad because I couldn't help myself
View detail
It is difficult for those clumsy to install
First, Design was good and it was good that Knee grip became easier.
Although it is an installation, Double-sided Tape is troublesome in case you have to paste it yourself.
The back side is smooth and easy to paste - - - (^-^;
Because I am clumsy, I tried it together before putting it on, but it interferes with Seat a bit.
If you give it above, it will be difficult to open a gap near with Tank Cap.
I removed Seat and installed it, but after all it seems that Seat is not getting attached to me.
Although there is no image, it is like a person who is attached to Tank Pad of Green who is coming earlier.
So, even if you scrape down the bottom part, it interferes with Seat a bit but Seat itself managed to install it.
I want the Instruction Manual.
I always thought that it was clumsy.
View detail
Silhouette Outclassing
I purchased White Gel. Carbon, because it seems that those with the same color are more likely to dare, White color and Challenge (^. ^)
However, since there are many small SmallWounds to install directly as White Gel as it is, those who are worried should prepare for painting. Budget for paint cost as much as 5k ... Also I minded myself and painted in-house paint.
I like Silhouette because it is Outclassing. Since my motorcycle is Green Light, I have floated A little unless you enter the White element a bit more (^ ^;
For your reference ...
View detail
Installed on my 2014 Ninja250. Got a Lime Green Gel Coat. I thought it's fine with a bit of color difference, so I installed it without giving it a paint job. The color is a bit different from the tank, but since they expect you to repaint it,
Installed on my 2014 Ninja250.
Got a Lime Green Gel Coat.
I thought it's fine with a bit of color difference, so I installed it without giving it a paint job.
The color is a bit different from the tank, but since they expect you to repaint it, if it bugs you I suggest painting it.
Installed it with double-sided tape.
The shape is made to perfectly fit the shape of the tank, and the backside was smooth enough that the tank wouldn't get scratched.
For me, I tried to perfect it, but after a few tries reasoned with myself that it sticking out from the front of the seat a bit was good enough.
It's probably my fault, so if you mark the location before using the tape, you should be able to do it perfectly.
Using it, I can support with my lower abdomen, and knee gripping is made easier, so it's not just for looks.
Looks good+better function, so I recommend this.
View detail
A really good and practical tank pad. I especially like the fact that it covers/protects a wide area of the tank. Many people have asked me where I've bought this pad as it is unique in Malaysia. Malaysians be aware there is customs charge on the item
A really good and practical tank pad. I especially like the fact that it covers/protects a wide area of the tank. Many people have asked me where I've bought this pad as it is unique in Malaysia. Malaysians be aware there is customs charge on the item @20%. Add that to your cost. View detail
I think with carbon that appearance is good to a black ninja. Although attachment also needs to remove a sheet etc., it is easy at the grade which does not take 1 hour. However, a rear face is likely to come out coarsely and a crack is likely to b
I think with carbon that appearance is good to a black ninja.
Although attachment also needs to remove a sheet etc., it is easy at the grade which does not take 1 hour.
However, a rear face is likely to come out coarsely and a crack is likely to be attached too many.
What was necessary was just to have devised making a rear face bite some etc., when attaching.
Since hidden processing is too bad, they are three stars.
View detail
Even if the double-stick tape enclosed attaches with an umbrella umbrella, it will separate immediately. After all, about double-stick tape, purchase and surface finishing are bad, the angle was worn, and it was whitish in the home center.
Even if the double-stick tape enclosed attaches with an umbrella umbrella, it will separate immediately.
After all, about double-stick tape, purchase and surface finishing are bad, the angle was worn, and it was whitish in the home center.
View detail