Fallen cannibals

The system was installed to reduce damage to the vehicle body and engine in the event of a standing accident or a fall.
It gives a sense of overhang and security. View detail

I've been using it well since purchasing it.

hello. I am the owner of a 19 year old Z900RS Hongryeon in Korea. I purchased the engine guard I always wanted at WeBike with a 20% discount on the overlacing engine guard.
A jockey is required to install this product, so be sure to install it at the center!
I hope there will be more sales in the future ------------------------------------------- --------------- hello. He is the owner of the Z900RS 19-year red lotus in Korea. I bought an engine guard I usually wanted to have with a 20%discount on the over -racing engine guard at Wewbike. Be sure to install it in the center because you need jaki to install the product! I hope there will be more sales in the future. Powered by Google Translator View detail

insurance against fire from standing fire

Bracket is Material:It is made of aluminum and is lightweight. The bolt on the engine hanger is difficult to remove, but once removed, it is easy. 22mm Spanner and a MONKEY Wrench are required. View detail

easy to use

OVER RACING engine anti-fall slider This is a very good-looking product, matched with the bumper of the same brand, the appearance is nothing to say. However, from a practical point of view, I feel that the protection provided by this anti-fall ball is still slightly insufficient. First of all, the length is relatively short. If it is really reversed, it may only protect the upper part of the engine to a certain extent. The lower part, especially the clutch cover on the right side, which is relatively easy to be damaged, needs additional protection. -------------------------------------------------- -------- Over Racing engine anti -slider is a very beautiful product. It is matched with the bumper of the same brand. It has nothing to say. However, from a practical perspective, it feels that the protection of this anti -downtown ball is still slightly insufficient. First of all, the length is relatively short. If you really reverse the car, I am afraid that it can only play a certain protective role in the upper part of the engine. The clutch cover that is more likely to be damaged on the right is especially protected. Powered by Google Translator View detail

Purchase with Sub-frame

I had an engine slider from another company.
I bought this one at the same time as I bought Sub-frame.
I don't want to have to deal with thisParts.
I think of it as an insurance policy. View detail

best engine slider ever!

I bought it together with the overlaying sub frame. It's nice to see the combination as expected. sturdy and bike
I really like the slider design that doesn't spoil the look. It is highly recommended to those who purchase an overlaying subframe. No regrets. ------------------------------------------------------------ -------- I purchased it with overlaying subframes. As expected, it is recommended that you look for a combination.
/>. It is strongly recommended to those who purchase overlaying subframes. No regrets. View detail

Good-looking, but it takes time to test whether it is practical

Good-looking products, when combined with the bumpers of the same brand, the appearance is nothing to say. However, from a practical point of view, I feel that the protection provided by this anti-inverting ball is still slightly insufficient. First of all, the length is relatively short. If it is really reversed, it can only protect the upper part of the engine. The following, especially the clutch cover on the right side, which is easily damaged, needs additional protection. Furthermore, this anti-falling ball is only fixed by a screw, and the space with the front water tank is too tight. If you reverse the car, you are a little worried about the displacement and damage the water tank. View detail

Anti-collision head

The OVER RACING anti-collision head is an optional accessory for the OVER RACING engine strengthening rod. Replace the two aluminum alloy spacers of the original reinforcement rod. It should be noted that the reinforcing rod is the part that connects to the engine and needs to be installed carefully with torque. In order to prevent vibration when engaging in speed. I installed it twice to solve this problem. ---------------------------------------------- OVER RACING crash head is OVER RACING engine spars option. To replace the original two aluminum spars shims. Note that the reinforcing rods are connected part of the engine torque required to play careful installation. When engaged to prevent rotation speed brought shock. I just installed twice before to solve this problem. Powered by Google Translator View detail

Don't fall down! Above etc.

I installed it with Sub-frame.
It's a Sub-frame, and it's up, etc. View detail

very nice

My car is a kawasaki brand. My car is a kawasaki z900rs. I bought the engine guard bar for over racing on webike. This product is anodized and very beautiful. The shopping experience is very good. z900rs, 2019. I bought the engine guard bar for over racing on webike. This product is anodized and very beautiful. The shopping experience is very good. ---------------------- ------------------------ My car is my brand kawasaki kawasaki car is the z900rs, 2019 models On webike bought the engine protection bars over racing This product is anodized electroplating, very beautiful The shopping experience is very good z900rs, 2019 models On webike bought the engine protection bars over racing This product is anodized electroplating, very beautiful The shopping experience is very good Powered by Google Translator View detail

Great Product

Product fits nicely on honda grom 2018. Easy to install, all necessary parts are present too. This is a very high quality product, and I plan to use it when I bought kitaco cover. View detail

He's working hard.

I've fallen over twice in the Mini circuit and so far it's been perfectly fine. (Lol) View detail

Buy it for looks

To be honest, I bought it just for looks. It sticks out quite a bit on the side, but it gives you a custom look
In normal step, the snare is very good It is no longer a hit
View detail

Parenthesis good!

The original intention was to be prepared for a fall, but fortunately it has not been taken care of yet It's not surprising that the function of the Quantity:Pair (for Left and Right) It is quite overhanging in the It doesn't interfere with normal driving at all, but sometimes I hit my snout and it hurt Let's be careful
I don't know how it works (I don't want to know!) If you follow the manual, you can install it beautifully and securely It is It's like a cheesy PRESS SteelCover hides a prominent Cell Motor It will be a bit of a dress-up for Grom's shoddy air-cooled engine It's a nice touch
Material:Even though it's Aluminum, it's pretty sturdy and has a lot of weight there (I didn't measure it, but it's both) (About a kilometer?) So, if you think it's not parenthesis, or it's not make-believe, don't put it on Maybe View detail

Very nice

I bought it to prevent it from falling over, but when I installed it, it looks accent and custom
I didn't have the tools to install it, so I had it installed at the store where I bought the grommets In terms of time, it took about 15 minutes
My only complaint is that it could have been a little cheaper View detail

It's expensive, but it's good

I won't have Black in the We-Big photo, so I'll put it up
Bottom line, yeah mon
You can't argue with the way it looks!
My single car is a CB1100
Reverse sidePlate did a circle of wisdom when I installed it, though View detail

To accompany wet Manhole

Although it does not jump out as expected though Cowl can protect Limit
Slider I will do a good job
DURACON high but if you like OVER Large durable
So if you like OVER View detail

VeryGood!

Somehow I bought Rear Sets of OVER, but I punched it, but I took it out of the box and realized the goodness of Material and the wonder of making it for the first time.
I actually installed it but I am doing Firmly and I am convinced that I will work firmly when I have time. View detail

What you want to do before you kill

Installed to protect the Engine

Compared with other products, making it seems to be strong is the deciding factor of purchase

The condition of protrusion is also good..

I worked according to the Instruction Manual and it was easy to install. View detail

Purchase decision at Brand

Brand + I bought it with good looks.
I never showed an effect
Because the bulge is Large
As I tried to extend my knees while running
I felt sorely hitting my shin several times.

Built-in is polite, installation instruction manual is easy to understand.
I am also happy with the extra Sticker ♪

I wish the price of money was cheap,
The similar inexpensive items and the Mount position
Because it is different, attention is necessary. View detail