It works great for standing up.

I installed it on my 2010 MODELF model.

On the Right Side, you just need to replace the bolt on the Engine Mount.
The Left Side will have to be worked on by removing the Side cowl.
There are many hidden screws on the Left SideSide cowl, so it is difficult to remove them.
It is difficult to install without removing it.

It doesn't look bad after installation.
However, the mounting position of the Quantity:Pair (for Left and Right) I'm curious because it's asymmetrical in
There will be people.

It's been 6 years since it was installed and I've had to replace my motorcycle twice in that time.
I beat him.
The first time, I was standing up and I didn't fall down with Bataan, but I could stand it.
Because I knocked down the Motorcycle to the point where I felt like I was supporting it and gently placing it on the ground.
The underside of the Slider was only slightly scratched.
The second time, when I applied the Maintenance Stand, I accidentally hit the wrong button.
I beat him.
However, the Slider was damaged, but the body was not damaged by the footpeg
The Knee Slider is broken and the Exhaust System needs a little bit of a good look.
It was just a small scratch that I couldn't see.
The damaged Slider is only damaged on the lower third.
It's not a scratch to worry about, and it was originally designed to protect the body.
It's a thing, so if it gets damaged, you can just replace it.
It is much cheaper than damaging and replacing the Cowletc. View detail

It's beautiful to look at.

I've imprinted my impressions of the last time I installed it, but I've found a picture of it and I'm attaching a picture, this Slider is a rare shop that will handle it, so We-Big is handling it for me, and if I want to ride the Dorso FACTORY again in the future, I'll buy a Repeat! View detail

Engine protection for $10,000

I used it for the Dorso FACTORY.
I put it on to protect my car, which is hard to get parts for when I run the MOTARDCourse.
Since it is usually my wife's toy, I put it on for protection so that it won't break no matter what. Fortunately, I was able to live with the Dorso FACTORY for 3 years without falling over. These Items are very good for a large area of protection. View detail

Fallen cannibals

It is insurance when I fell down.
It is not a common conical type, it has a stylish shape, so it gets a little eye - catching.

- About installation
Instruction Manual is English Version and German only?.
Tightening of Engine mount bolt Since the value of Torque is different from that of Service Manual, we tightened with reference to Service manual.
End cap is Quantity : Pair (for Left and Right) I will come with spare one by one.
However, this is hard and does not get crowded.
I gave one side if I did it to the force ...
It was nice to have a spare. View detail

STAND deviation measures to overturn

Installation completed in about 20 minutes.
It is easy if there are longer Hexagonal and Double-end Wrench, Socket wrench.
Looks a little cheap, but making is not bad.
However, something different from Design did arrive. The target car model itself is fitting and it can be installed obediently, so there is no problem in terms of function so we will compromise well, but with Level which can not be helped with Objection. View detail

"Overseas are custom parts of Puig, and a crash pad slider. Appearance is a design like a mushroom and is not so smart. Moreover, it would be attached as right-and-left asymmetry. (Referring to the photograph) However, the performance as a slider is enoug

"Overseas are custom parts of Puig, and a crash pad slider. Appearance is a design like a mushroom and is not so smart. Moreover, it would be attached as right-and-left asymmetry. (Referring to the photograph) However, the performance as a slider is enough, and this slider takes over the damage in the case of falling with standing. Although the slider for gladiuses is sold from Agras and Unicorn japan, each have to remove a lower frame cover or the drilling process of a lower cover is needed. The slider of this Puig has unnecessary to remove and process a lower frame cover. Required tools are a spinner handle and a socket when attaching. I used 12 angle socket of KTC, and the spinner handle of astro products. As for ttachment, the bolt of a frame is used. Therefore, please keep in mind that the check of a torque value is required after attachment. As another notes, it is a graphic sticker of a slider. It was published as the sticker which has a logo of ""GLADIUS"" in a product page was attached, but when I purchased, the logo sticker of ""GLADIUS"" is a halt in production, and the logo sticker of ""SFV"" was attached instead. If you care about a logo, I recommend to check before purchase. Moreover, this logo sticker becomes tattering by one fall. If you worry, it may be better to purchase a spare. Overall, it is a recommended slider. How about considering purchase by all means, also in order to protect the motorcycle?" View detail