Coating installation vehicles may be prone to peeling?

[How is it used?
MDFBird Corroe previously attached to another car model. "Re." I liked the Rim stripe, so I decided to use the Bird corroe made of the same MDF. Le." I purchased a rim stripe and used it on my GSX-R125.
Was the one you received as per Image?
I think it's a little more flashy than the TricoloreRim stripe I bought before, but not vulgar. I think it is a little more flashy than the TricoloreRim stripe I bought before, but not vulgar? I interpret it in a good way.
Webike's review is good because it is easy to get an image of the product because everyone has posted a picture of the product pasted on their Motorcycle, which is their pride and joy.
Was the installation difficult?
As I mentioned in another Review, the work Difficulty." rather than "Bothersome" is a strong feeling.
I have used MDF's Off rim stripe (a product that is just the right width for off-road motorcycle rims) several times in the past, and in the beginning Spray the adhesive side of Decal with diluted neutral detergent using a mist, etc., and stick it in place while adjusting its position." The method was used for construction.
Merit of this construction method includes "Gaps that occur during the application process can be easily corrected." As for the Demerit. It takes time for the adhesive surface to settle down after the water sprayed on the adhesive surface evaporates, so it takes time before it can be ridden out." That was the thing.
Currently sold by MDF. "Sticking Gauge for Rim Stripe" For more information on using this product, please see the video in the product section of Webike's website. 。
The Merit of using Sticking Gauge for Rim Stripe is that It can be applied to Beauty in a fixed location on the Rim without the use of diluted neutral detergent and water." The fact that the adhesive can be applied to Beauty without using a neutral detergent diluent shortens the time required for the water to evaporate and the adhesive surface to settle, allowing the user to ride immediately after installation.
How was your experience with it?
I thought it might not match because my motorcycle body was Blue/Silver with Black Wheels. I thought it might not match, but I put it on...well, personally, I thought it was a nice touch. (It is about the balance of the color scheme, and there is nothing wrong with the product.)
This is sufficient because the purpose of this component is not to improve performance.
[Included Parts:were they on?
This product + Instruction Manual with instructions on how to apply the product is included in the package.
[Was there anything that disappointed you?
We have used the company's sister product several times and have not been disappointed.
Other items that would be helpful
Point and hang of installation
Please apply it after thorough surface preparation (cleaning & degreasing) of Wheel.
Plus to what is mentioned above. Tricolor Rim Stripe are for Decal with letters and Plain Decal, please put them in order from the top of the Decal on the base paper.
Read through the Instruction Manual carefully for these and other information.
[Availability and clarity of the Instruction Manual
As mentioned above, Instruction Manual is available.
The contents are illustrated and easy to understand.
[Notes]
As is the case with OEMDecal, it will peel and fly off if used too close to a high-pressure cleaner.
Sold by the company Off rim stripe Unlike the "RimDecal", the RimDecal contains enough rim stripe for one motorcycle (for front and rear wheels) (Off rim stripe must be purchased separately for 21-inch front wheel and 18-inch rear wheel).
Glass coating is difficult to adhere to and tends to peel off easily. I have heard that, FYI.
Items to be purchased together
Made of MDF as mentioned above. "Sticking Gauge for Rim Stripe" If you are not confident about it, please refer to the following page (priced at 210 yen including tax).
If you do not have it, you should also purchase Parts cleaner, as you will need it when degreasing.
[Opinions and requests to Manufacturer
I wonder if the price could be a little bit lower. View detail

Rim sticker

Easy to put up.
It sticks well.
Quite sturdy. View detail

One point on your feet.

Purchased Black6mm.
I bought it as a One point kind of thing, but I think it could have been a little thicker.
The workability was good, and since we purchased the special Gauge, installation was easy.
It would be troublesome without a dedicated Gauge. (Quantity):(Set should be sold)
I am satisfied with the product. View detail

It goes up nicely.

It would be easier and easier to put it on if you had STAND! View detail

good quality (goods)

I put it on my car because I was feeling sad about the undercarriage, and it looks cool and I like it, but it is a GoldWheel so you can't tell unless you look closely. There are cheaper ones, but I chose MDF's because I didn't want the hassle of having to reapply them if they peeled off. View detail

It's so much cooler now.

I have been using Green OEM Rim sticker on my Z400 since I bought it new, but recently I got tired of it, so I was looking for a good one, and I found MDF Rim sticker. I also bought a special gauge for sticking, and did it while watching the procedure of Site of MDF, and I was able to make it good. View detail

Whether the price is acceptable or not

This was applied to a 2012 model Ninja 250R.

Since the body color is Red, I made it Tricolore like an Italian car.
Black monochrome Wheel is now gorgeous.

The installation method is to dilute the neutral detergent with water according to the Instruction Manual and spray it on the surface.
I attached it while carefully checking the positioning.
It'll take me about 30 minutes to finish putting everything up.
I recommend this to anyone who is considering an inexpensive dress-up. View detail

Motorcycle's look has changed.

I've wanted to put a wheel Rim stripe in for a long time, but I wasn't sure if I could stripe it by myself, and time was passing, but then I discovered that there was a Guide to put a stripe on it, and I saw a lot of videos on YouTube where you can put a Rim stripe on it, and I thought it would be fine by myself. I bought it because I wanted to.

I was not sure about the color, but I chose the red color.
When I applied Stripe, there is an instruction manual enclosed in this product, so I could apply it easily.
We feel that a separate Guide is a necessity.

The other thing is how durable it is.
View detail

If you want to put Rim Tape on your Motorcycle, this is it

Rim sticker on Motorcycle (Rim stripe) You can't go wrong with this one if you're going to wear a

There are many different designs and sizes to choose from, so you can match your favorite color and design possible to do

If you buy the Guide that is sold separately, even for beginners, if the size of the Wheel is right, you can use it Easy to install

It can be easily removed in case you want to take it off, and it doesn't have any glue sticking to it

It comes with two spares, so if it goes wrong, it's not a problem

The only downside is that it may be $3,000 & hellip for Seal; but you'll be happy to put it on So forget it View detail

favorite

As it was good for MT-09 Tracer, it is the same for MT-03 which is all black I installed the Design one
My favorite
View detail

It is easy and fashionable Items

Because chassis color is Deep red metallic, I tried Rim stripe for Tricolore.

The result was right answer, Red part did not claim too much and it became dressy attire.

It is conscientious that MDF is supplementary to the spare Stripe. View detail

Because it was good last time

I replaced Motorcycle. Since this product was reliable and easy to paste, repurchase.

This time I made it to Tricolore with playful attention according to the body color of Red system.

I am satisfied with my self, but I think that it will surely be fashionable! View detail

Perfect for the car body of Mud gray

Yamaha's Motorcycle also had a color called Tricolore color and I was hesitant to be honestly worried about buying it, but I tried purchasing with a change of pace.
Because the quality is good, I feel satisfied with Large without feeling of aftertaste.
Impact in the car body is also Large in the Custom for the low Cost, so if you are not yet experienced, you'd better feel it once with your favorite Color. View detail

Rim stripe

I bought Tricolore Whites for thinking of Fashion at the foot of CB 1000 R
Although I was not originally dexterous I struggled to stick, but the finish is like this
It was slightly gorgeous a little lonely that Wheel was Black View detail

I exchanged my webike points for a MDF rim stripe set.I was thinking that white rim stripe would match my white vehicle.I'm very satisfied that the tricolore rim stripe matches the exhaust of EUR spec.Installation didn't go well becaus

I exchanged my webike points for a MDF rim stripe set.

I was thinking that white rim stripe would match my white vehicle.
I'm very satisfied that the tricolore rim stripe matches the exhaust of EUR spec.

Installation didn't go well because of my inexperience. I should have bought a jig together.

Having the jig is recommended. View detail

I bought a set for 12inch.My machine looks great with this product. TRICOLORE is doing a good job. MUGEN Rim Sticker was also attractive, but I chose MDF without hesitation because MUGEN provides a set for one wheel and MDF does a set for one vehicle.

I bought a set for 12inch.
My machine looks great with this product. TRICOLORE is doing a good job. MUGEN Rim Sticker was also attractive, but I chose MDF without hesitation because MUGEN provides a set for one wheel and MDF does a set for one vehicle. A bonus sticker for a wheel surface is good, too (another bonus sticker is included). Great cost-performance!! (For those who seriously seek "cool", please buy wheels.)

I want to say "the installation is easy, you just stick it on!", but actually it was a tough job (if you care the details). I recommend rough work with "I don't mind failure. It's just 3000 Yen." Put some 5cm on the edge of a wheel and stick it, put some 5cm on the edge of the wheel... the installation repeats this process. Let's challenge! View detail