Reviews
large-volume saving
I found this product when I was looking for a good helmet holder for my motorcycle.
Now I can avoid Helmet from theft and other dangers. I like this product very much.
View detail
OEMHelmet holder relocated to Handlebar Post
The position of the OEMHelmet holder on the MT-09SP is very difficult to use, and it seems to get scratched by the footpeg and the dirt from the Chain lube, so I bought this Helmet holder to be able to lock it when placed on the Tank! I bought this Helmet holder so that I can lock it when I put it on the tank.
Since the Mirror mounting position would be easy to remove and the switch for the driver's recorder was already installed, we converted it to M10→M8 using the Washer (part number:78032) sold by the company and tightened it together with the Handlebar Post.
Our Handlebar Post is flat, so we were able to install it as is, but if it has an elaborately designed R like an OEM Post, you can install it by inserting an M8 collar that is taller than the protrusion of the R and a large M8 Washer between the Post and Bracket. I think it is possible.
I wanted to use the same key as the car body, so I thought I would need to modify the key cylinder, but it was the same shape as the OEM holder and could be transferred to the included bracket without modification.
The wire in the picture was purchased separately and installed, but it was quite stiff and difficult to use, so we replaced it later with a thin, easy-to-handle, compact one that came with the product.
The actual usability is a little cramped and I am accustomed to turning the key, but I can use it conveniently without having to turn the Dial without increasing the number of keys.
View detail
Fits: SUZUKI Bandit 1250F, SUZUKI GSX1300R Hayabusa
Can be used for first generation GSX1300R HAYABUSA
I saw a post on Amazon that it could be used on the first generation GSX1300R HAYABUSA, so I bought it as a trial.
Installation can be done without any problems.
However, there will be a small gap in the OEM Mirror rubber cover.
With ARAI's Full face, the ? ring is Limit in the lock area, which may damage the interior, and it is a little difficult to insert the key when removing the lock.
I will also take into consideration the included WireSpec.
However, the OEMHelmet holder cannot be used with the Seat bagetc., so with this attached, I no longer have to worry about where to place the Helmet.
View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
Used for pcx jf81
I installed it on the LeftMirror side of the pcx jf81. Easy to install 。 The product was also thick, chunky, and rigidly made. View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
That would be handy!
The OEM Helmet holder was damaged, so I installed this one. I bought this because it said it would work with my Jacket if I used the included wire. It's easy to install! I think it's great for when you need to get away from your motorcycle for a short time. (^O^) View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
I should have done this a long time ago
The NORMAL Helmet holder is a bit difficult to use
It's good because you can use the Mirror with the Helmet on it
It's just one more key, which is a bit annoying
View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
Stable
This is a normal Mirror ClampType Helmet holder with nothing to write home about
it's the DAYTONA product, so I have no complaints about the quality and price
I'm not sure what to do with the wire, but I'm having trouble using it
View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
It's just a wake-up!
CRF250L mugenSpec. Mounting on.
I installed it in Right Side.
After installing, one day, on the road "Helmet disappears?" It is said, go ahead,
There was a person who was trying to bring Helmet, (I can not take it)
Excuse me but I could smile.. At first glance, I do not understand.
However, because Helmet is hooking on Mirror, Mirror will be a little dirty with the inside of helmet and kore, so be careful.
If it is summer, if you catch it after running, it will dry soon so it is Recommendation!
The position of the Helmet holder is (Handle mirror car only) If you do not like it, it will be good if you attach it to the Handlebar! However, if the car body collapses with the Helmet turned on, it will be erased by scratches ...
View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
It's simple but safe
Helmet, Wear is multiplied by Mirror, but the attached Wire is useful.
As a burglarproof we are upset if Mirror is removed
There is a sense of security for fall prevention when leaving a bit.
View detail
Fits: SUZUKI Bandit 1250F, SUZUKI GSX1300R Hayabusa
Easy to use
Until now I used a Wire type lock, but since it was taking out from Bag when I used it, it was good that I did not have troublesome work with this product View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
It is useful for chokei
Africa Twin's OEM has to remove Seat one by one.
Cover Mirror with Helmet and lock Helium D ring and attached Wire through the collar collar together.
View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
It is convenient when putting Helmet on Tank.
Attach to LeftMirror Holder.
Doing so makes it possible to use Handlebar Lock when you just put Helmet in Tank.
Although it is a simple lock, it is convenient for touring because the lock will be lost easily without feeling it even when leaving a bit.
View detail
Fits: SUZUKI Bandit 1250F, SUZUKI GSX1300R Hayabusa
Fixed Bolt - - - It is
GSX1300R Hayabusa 's Mirror' s Base will be tightened together and the lock body will be tightened with the attached Hexagonal Wrench, but the included hexagonal dish Bolt (Red arrow of photo) Is BlackBolt so it tends to rust.
In fact, since rust occurred in less than a month, we used Material under the same neck at Home center : Exchange with Stainless Steel dish Bolt.
I absolutely wanted to devise a little more because it attaches to the part where rain can not be prevented.
That price is slightly expensive.
View detail
Fits: SUZUKI Bandit 1250F, SUZUKI GSX1300R Hayabusa
Helmet Holder Mirror Clamp
GSX 1300 R HAYABUSA is troublesome if the Helmet holder has to remove the Tandem seat and fix SeatBack to the Tandem seat during Touring. Therefore, even when parking Helmet was unprotected by Mirror. This Helmet holder is attached to the root of Cowl's Mirror, it can change the direction Quantity : Pair (for Left and Right) It corresponds to both.
The installation can be easily installed with the feeling of being sandwiched while removing Mirror. The feeling I used is not bothersome even if I get away from Motorcycle a bit, such as Convenience or high speed SA.
However, depending on the type of Helmet, there are things that Sting's Ring does not reach. In that case Extended Wire Code included (1200mm) We will correspond with. By the way, ARAIRX-7 RR5 is LimitOK, GT-Air is somewhat hard. Even if it suddenly rains, since Helmet becomes Up, I think that it is good to be locked without getting wet inside.
The included Wire cord is passed through Jacket which is not taken off by Helmet, Jacket's theft suppression is also possible so it is convenient for medium to long distances such as Summer Touring.
I can use it without problems for the function. However, it looks awful, I can not deny the discomfort to Cowl. In the case of photography etc., it is removed. I think that it may be necessary to attach or detach it from time to time.
View detail