Reviews
Used as Repair Parts for MC21
The other Quantity:Set is also required, but with this, Carburetor's Overhaul can be done on an individual Level.
I thought that the number of Main jet should be a little closer.
View detail
Fits: YAMAHA RZ250R, YAMAHA RZ250R, YAMAHA RZ250R, YAMAHA RZ250R, YAMAHA RZ250R, YAMAHA RZ250R, YAMAHA RZ250R, YAMAHA RZ250R
Jet type numbers are available, useful for jetting of old cars.
[How is it used?
I was asked by a friend to set up an RZ with an external chamber.
Was the one you received as per Image?
Yes
Was the installation difficult?
No problems
How was your experience with it?
Since both Jet and Needle have multiple numbers in them, we were able to provide setting while maintaining a safety margin.
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: SUZUKI Savage 650, SUZUKI Savage 650, SUZUKI Savage 650
Cheaper than individual pieces
I wasn't in bad shape to begin with, but I was interested in buying it.
Multiple Jets and Needles are included so that you can try various Settings depending on the Condition of the vehicle.
Thank goodness they are supplying Minor SAVAGE as well.
View detail
Keyster - best to your carbs
Keyster adjastment kit - it's one way to tune afr, and include all parts for rebuild your carbs at the same time! Best bay for this price! After tune, my gixxer "eat" 6-6,5 l/100km at 200+kph and pull to redline much stronger. I am happy))) View detail
KSR80 carburetor adjustment
KSR80, but the carburetor seemed to be overflowing.
So I thought about replacing the Needle Valve.
The OEM Needle Valve Assembly is still available from the manufacturer, but it will cost 300 If you're willing to pay close to 300 yen, you can get a fuel regulating part for 4400 yen from Quantity:I wanted to buy a product from Key Star that was in the Set.
I have almost all the parts I need for the carburetor overhaul, plus a few parts in LargeSmall and Quantity to adjust for fuel economy.:It is set. 。 It also comes with an instruction manual for fuel tuning, which is very useful.
The main purpose was to replace the Needle Valve, but I also wanted to adjust the bumpy feeling in the middle range of the Axel, which is unique to KSR, so this is a very good introduction to carburetor adjustment for beginners.:It was Set
I wanted to replace the Needle Jet when I replaced the Main Jet, but the Washer, the part that goes between the Main Jet and the Needle Jet, was not in Quantity.:I did not replace the Needle Jet this time because it was not included in the set. 。 I plan to purchase the missing Washer from OEM Parts at a later date and replace the Needle Jet.
As a result, with the air cleaner shielding removed and the PRO's Kill silencer in place, I settled on MJ #82.5, SJ #29.0, Jet needle”S”Clip 2-stage. SJ #29.0, Jet needle”S”Clip 2-stage I settled on MJ #82.5, SJ #29.0, Jet needle”S”Clip 2-stage.
View detail
Fine quality
Well-made and packaged parts, I took it instead of a repair kit, there is everything you need, except for membranes and bolts, plus tuned dimensions for adjusting the carburetor in case of replacing the exhaust. Well-made and packaged parts, I took it instead of a repair kit, there is everything you need, except for membranes and bolts. Also in the set are tuned sizes for adjusting the carburetor in case of exhaust replacement. View detail
The immovable Engine has been applied.
I bought this for my SR Carburetor which is not an OEM product. The results were as expected, it started successfully after 9 times of kicking, and I would like to change it while watching the condition because there are various numbers of jets. View detail
Fits: YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400
For 3VN, but only P/J is used for 1JL
Only Pilot Jet was used for SRX-4Initial Model (1985:Model 1JL).
During under-seat engine holing, this is the only place where the hole is completely clogged, and no matter how much I pry, it won't penetrate...
We have no choice but to give up reuse, but OEM Parts are out of supply...
I was looking for an alternative.
The kit for this Initial Model1JL is not in the lineup, so I bought the kit for 3VN (last model?). I bought the kit for 3VN (last model?).
I have already confirmed that the Pilot Jet is the same part number for both the Initial Model and the Final Model in the ManufacturerParts List, so I judged that there is no problem to use it.
As a result, I'm back on track.
There is a thing that may be able to be used besides P/J, but even if installation is possible, the dimensions, the position of the side hole, and the shape may be slightly different, so it is better to compare well afterwards. Because it is only for 3VN.
The shavings are clean and the quality is good, the packing and O-ring are included and the instructions are good.
I liked the way it seemed to take the user's side into consideration.
thanks
View detail
Excellent product
First of all, the shipping from Webike was extremely fast, and the price is very reasonable. All pieces appear to be very precisely made, and the packaging is fantastic. I'm in the process of rebuilding the engine and carb so I can't comment on performance yet, but I expect to have no issues with this product. Highly recommended. View detail
The savior when OEMParts are not available
I bought one for CB450 K5 which seems to be compatible with CB500T because CB500T is not in the lineup.
Product Contents are Standard, Needle and Jet, and Pilot screw.
Gasket and Drain bolt are included.
Because the intake and exhaust system is NORMAL, the setting is Standard and all parts were replaced.
The cause of the sluggishness and the fuel consumption deterioration was the insect infestation of the Needle Jet, and after the replacement, it became good and the fuel consumption increased to a large range.
This Kit has wiped out many years of discomfort.
View detail
Fuel Tuning Kit
KSR2 B6
Remove the intake air filter plate in the air cleaner box, PoshCDI, Air FilterOthersNORMAL made by Air TEC
Gasket and ORingetc. that are necessary for CarburetorOH are also included and good.
Pilot is #20-22.5, which seems to settle in, so it would be even better if the weight loss side was included.
View detail
Fits: HONDA XR100 Motard, HONDA XR100 Motard
Good Parts.
Both the Jet and Needle have a number of different speeds that are not available in the OEM models to allow for fine setting.
It was a slightly tweaked Engine so this was a big help.
It's running fine now.
View detail
To CarburetorOH of a malfunctioning KSR-2!
I did a simple Carburetor OH to revive it from long term neglect, but it was not fully in tune and all the parts are in place to do a complete OH "Key Star." I bought the OHKit of the engine. The engine is in perfect condition and I am enjoying touring very much. View detail
Impeccable accuracy Carburetor setting made easy!
Is it good at such a price? and the cost performance that everyone feels is amazing.
I can't thank you enough.
View detail
To Restore the carburetor!
On a rotten carburetor with an old Gasoline!
I bought this for my XL250S carburetor Restore that I had neglected for years.
I love that it has multiple Jet products in it.
The quality is made in Japan.
View detail
Fits: YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX600
It's good enough
I used it to overhaul the carburetor on my SRX600.:I'm not complaining because I can buy it cheap at Set. There is a discontinued part when it is OEM already, so I think it is safe to have one when it is necessary. View detail
Sunday mechanic.
Thank you for getting it to me earlier than the expected delivery date.
I don't think you can go wrong with Key Star for Carburetor adjustment on older Motorcycles.
View detail
Very nice product
The DT200R37F also got back on track with this, but unfortunately, the overflow happened. Nothing happened for about 6 months, but in the last 2 months, it was causing overflow frequently. At first I thought that the Float was not adjusted properly, but then I found with Stages happening around the tip of the Needle. I wondered about it and tried to adjust the Needle, Seat and Washer with Quantity:It's back to OEM in Set and it's gone away now, but we're still monitoring it.
I've been using KeyStar's fueling kit for a while now, but this is the first time I've had to do this.
View detail
Brand in trust
I haven't used it yet
As far as I can tell, it's a quality product.
I feel very good about it.
The carburetor is a precision instrument.
This product is safe to use.
It seems to be able to do things.
View detail
Useful for OH
【good point】
Required Quantity:It is very attractive that you can get a set product inexpensively.
It's a good idea to use this one, especially if you don't want to change the spec. of carburetor into a large one.
[Bad point]
None in particular
[Summary]
Easy to use product for vehicle Restore and carburetor OH.
You don't have to buy them all individually, so you can buy them without hesitation.
View detail