It's going to be a tight grip

The SCRAMBLER 800 had a slippery knee grip, so I bought a Tank Pad

I thought Design was great!
I don't know if the price is low or high I bought it without comparing it to others

Tank Pad is for the middle part and both SIDE parts, and I bought it for knee grip, so I can use it for both Installed for SIDE portion only

Impressively, it looks like you can get a pretty chunky knee grip View detail

It works as expected

I have installed a high seat on the K1300S
This high seat slopes forward

So I bought it with the purpose of improving my Grip strength

It was installed with Dryer while warming it up in season

And today I ran it, and it felt just as grippy as I'd hoped
Help prevent slips! View detail

Whenever possible, it's better to choose another product

Review erased, so I added it and reposted it
It's going to get erased again anyway …


The one I received was badly stained by White
It was degreased and stuck on, and two days later it came off when I rode the Motorcycle
Peeled areas have no adhesive strength and cannot be reused

Avoid this product unless you're really good at it
View detail

Hey, this is bad

I received one that was dirty or white in places
This is terrible I can't help but wonder how they sell this as new I have nothing to complain about
I think I'd rather have the inexpensive crackers on sale at a certain Ok or amazon
View detail

high

I'm very happy with the functionality, I'll be putting it on whenever I buy a motorcycle, even in Jeans The design is also simple and easy to use I think it will match any motorcycle But it's still expensive View detail

Size does not match for TL 1000 S

Even if the price is a little too high, it is quite tough that the dimensions do not match and protrude from the recessed part of Tank and peel off from the part of the Rear surface.

It seems to be TL common design, is it because Tank shape is different between TL 1000 R and TL 1000 S.

I think that it is better to buy Universal Product if honest processing is necessary.

I'm satisfied with the Grip ability, Knee grip works well on jeans. View detail

I slid with leather bread.

I usually ride on leather bread, but this Tank Pad slipped.
I have not tried it with jeans or Riding Pants, so I do not know..

I decided to exchange it without much use. I'm sorry. View detail

The body does not slip and it is easy to hold the car body

The texture of slip stopper Rubber was as expected.

As it is hard it is hard to stick, so warm it with Heat gun and soften it, align firmly and turn the Seal halfway and paste while aligning it is easy to stick.
Because model Exclusive Design, shape is also Exactly.

However, adhesiveness is somewhat weak because it can be re-tensioned. After a while it came floating that there was a tough place of bending. Heat gun firmly stuck when warming and pressing it.
It is very good as Tank's Knee grip can be tightened and devoted to control of the car body. View detail

It is quite a good product

Since it can be repositioned, positioning is easy, feeling touch Grip is also good. However, the price is high, Neck. Instruction Manual is not included but it will not be necessary. View detail

Delicious time is slightly short

Three years using. At the beginning of use, it was the best with a good Grip feeling, but gradually the Rubber has been hardened or slippery So now, the first Grip feeling is almost nothing. About two years I was in good condition, so I think that it is enough. If it is Pants of a thin cloth it will transfer color. Those who want to use it for a long time may be better on ThornThorn surface. View detail

Grip has no problem

quality : Quantity : Pair (for Left and Right) With some shape difference.
Performance - function : Grip force is no problem.
Feeling of use : It will be easier to maintain posture even with a strong Brake. Knee grip assistance.
Design : Cool
Cost performance : To the price, quality is not good.


★ 2015 It is a product for MODEL, but it can be used even in 2017.
★ I repositioned it several times for position adjustment, but it can paste without problems.

View detail

Excellent Grip feeling

As for the owned Z250 Matte painting, because of Mr. knee grip Tank 's expertise is concerned and it became this commodity as a result of thinking whether there is something good, choosing the type of conference in case of town riding & touring being the subject I got a reasonable Cushion and Grip feel just right.
By the way, Z250 does not do Hit with this TECSpecifications product search, Hit it when searching overseas MODEL's NINJA 300 !! Of course it can also be used for NINJA 2 Helmet50R. View detail

Check your position before you buy

With the GSX-R1000 L4MODEL

The pads on both sides of the tank, the pads on the crotch, the total of 3 pieces are Quantity:It was Set

But because I'm only 161cm tall and my inseam is short, I can't even stand on my toes on the footpeg
There was virtually no area of contact with the Tank, which was pointless
If you are considering purchasing this product as a supplement to the knee grip, please check the position of the knee grip before purchasing re

I cut and pasted it for Cover between Tank and Frame
However, it was not possible to adhere to the resin part and Double-sided Tape was purchased separately

Price-wise and honestly, both SIDEQuantity:I think you should buy the EasyGrip in 1 Set of 4pcs View detail

It is a good item

I was worried that it could be stuck on a curved surface because it was hard and thick, but because it has more flexibility than it looks, it could be pasted without floating. It seems that even if you do not stick the dust etc. exactly and degrade it stickiness does not fall. View detail

Almost satisfied

It is an installation only for impression.
This product was quite thick, so it was the first impression that I could stick it well. As for the result, pasting of the surface also has no problem. If you do not degrease it exactly and do not attach dust, you can reattach it. Indeed, although I tweaked a few times while finely adjusting the position while straddling, I was able to do satisfactory sticking without decreasing the adhesive strength. You can recommend it to those who want something with sharp protrusions like other Manufacturer. The only worry is the durability of the adhesiveness that can be reattached. View detail

I will not slip when hanging off!

When I hung off, I bought it because I felt quite scary because the peach part of the leather bread and Tank slipped.
The decisive factor of purchase is the place where you can hear again.
In best positioning, we have re-tensioned about 3 times on our side.
It is extremely difficult to position with one time, so I think that it was very good to purchase this item that will re-tension (I regret that I should have bought sooner).
While hanging off, I was reapplying it, but this product never shifted, leather bread did not slide at all, Position was stable and able to turn to Smooth, I was impressed.
Moreover, because it made it to SnakeSkin, it is very satisfying without aggressiveness to leather bread.
Center Pad also seems to be a little useful for the protection of the Large thighs because the range is large and the thickness is also large.
Those who ride a SS going to a pass or a circuit, we recommend purchasing by all means. View detail

Pants do not slip when hanging off.

When hanging off, Riding Pants hitting Tank slid and scared, so I bought it.
The good part of this product is where the re-tension is good.
When pasting, Quantity : Pair (for Left and Right) It is quite difficult to paste the position symmetrically, it is necessary to reposition fairly well and it can be repasted very much and it was extremely saved.
If you do degreasing with the Silicon-off around the pasting position of Tank, it will be hard to peel off. If there is no contamination of Air slowly sticking from One Side you can paste without problems.
After trying the test run after pasting, the contact surface of Pants did not come to the best position against Pad, and the paste was twice repeated on the road. Riding at the best position was confirmed that there was not too much aggression against Pants without slipping, so it was a very satisfying product because we can concentrate on Riding without scary feelings in the future.
However, as long as the price is cheaper a little, we decided to set COSPA to 4. View detail

Knee grip can be done with ease!

I think that the strength of the upper body will be good so that the lower body's Grip can be firmly carried out until the city ride ~ Circuit run. Especially since the posture stabilizes in the vertical G at the time of Breaking it will block the intense heat from Tank so Jeans should be able to Grip without burning. But it is no doubt that compatibility is good as leather bread and leather suit suit. The feeling that I pasted is unexpectedly cheap feeling and Black color is moderately good Accent and I personally like it! When pasting it is Silicon-offetc. I think that it will be finished with a good feeling if you degrease properly and stick it and leave it for about 2 days..
View detail

I'm glad I bought it.

? 【What made you decide the purchase?】
It was that it was dedicated to the car model and the friend's reputation was good..
? 【How was it actually used?】
It's better than I expected. Because Motorcycle is Black, it is not noticeable, "I have a bad day," It is often said.
? 【Was it difficult to install? (Hard parts case)】
It's super simple as it just pastes.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
The position to paste is Quantity : Pair (for Left and Right) I wanted to make it symmetrical, so I decided the position in advance with Masking tape.
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
I do not slip and it does not hurt even with G bread. However, it is good that Pants will not be strangely pulled.
? [Is there anything I was disappointed about?]
None.
? [Request to Manufacturer - Please let me know if you have any improvement points]
Tank, Tank Under Cover Total Quantity : 1 Set of 4pcs. , But I do not need the Tank Department.
? 【Have you compared items?】
This product's high FUSION, Comfort.
? [Others]
Purchase SnakeSkin. There is no problem such as town riding, Touring, pass etc..
High pass Corner was comfortable in many places where there were many turnovers and turnovers, and the Knee grip gave a sharp contrast.
Two leftover pieces from the Tank section were attached to Gamma. Knee sliding rolling when riding Gamma except leather bread
(To Tank instead of Road) It's just fine as it's dangerous (^^) /
** Because polishing Tank with Plexus makes it slippery (Lol)
It will be about a year, but there is nothing like peeling off at all. It is a good item.
View detail

SnakeSkin for sparrow bee 900 Knee Grip Pad

Usage applications include city riding, Touring, somewhat hard pass attack.

I previously used the rough AndRoad Universal Product, but here the bonded surface peeled off quickly and there was a difficulty in durability. It was cheap so it was suitable for the price.

Will it be able to experience the effect, is it a pass attack.
Leather suit Even if you do not wear it, you can feel that it is solidly done Hold.

Also, the looks became tightened impression, even NORMAL, feeling that it is a bit different if it is attached.

Although it is durable to worry, I think it seems to keep quite good, firm making.
Good thing is that it's a reasonable price.

At the time of a corn Ring mistake, thanks to this Hold feeling, I prevented an accident.
Control nature, it can be said that it is an essential item to obtain a sense of unity.

However, it took about a month from order to delivery.
Maybe it's a Minor car, but .... View detail