Reviews
I'll never roll over …
I don't want to be in the care of this guy. View detail
Why do I feel a sense of security just by installing it?
Easy to install. I think it looks good. The price is a little high. View detail
Over Racing frame sliders R6
Hello! I'm from the Philippines! The frame sliders are a perfect fit. Kudos to Japan made products. Easy installation procedures and everything is exactly matched. View detail
It's well made.
I bought a new car, so I bought and installed it just in case.
Things are well made for the price, and you can rest assured that you'll be safe if things go wrong.
I have no complaints about the details and the installation was a breeze.
The only complaint I have is that the price could have been lowered a bit.
View detail
worst case scenario
SliderBracket gets stuck in the Engine because of a standing mock-up
Crack has been added to the cylinder and cylinder head
Wrecker transported due to oil leakage
Repair estimate is $250,000 OverRACING!
View detail
Removing the Cowl is a pain in the ass
The Cowl cannot be attached or detached while the Slider is still attached
You can install the Cowl without removing it It was written that you can remove the Cowl without removing the Slider, but on the contrary, you can remove the Cowl It will be gone
Frequent removal and installation of Engine Mounting Bolts is a hassle
I'm considering switching to another product
If you don't do your own maintenance etc., this is the only product that isn't a direct mount Recommended
It is not recommended for those who frequently take Cowl on and off and service it
View detail
Slider of the only type that is not directly attached to a Frame
This is the type of Slider that attaches directly to the Frame, even if it is superfluous because it is a heavyweight motorcycle I wanted to avoid using a bracket, so I opted for the only type that uses a bracket to attach it
It's pricey for that, but it's inevitable
I have no idea about protection because I haven't even stood up yet, but it looks It doesn't get worse either
I left the installation to PRO, and the Engine Mount bolts are very strong with locking agent Strong
Recommendation is to have the work done by top-notch tools with high accuracy If you mess up, it's a Bolt that will cause you a lot of trouble
Installation can be done without removing the fins
View detail
It helped to alleviate Damage of standing gobble.
Purchased for GSX 250 R.
It was aimed at alleviating Damage because I bent Shift Pedal because I was stunned awkwardly the other day.
I was praying that I would not be active after installation, but the next week I got stuck on Right Side. (It is not that I did not stand on purpose deliberately for confirming the effect. ) The result is Brake pedal, Cowl, Lever, Mirror all without Damage. I just scratched the surface a little bit.
Although the effect on the original use is unknown, at least the effect on standing gobo is enough.
View detail
Good product if you do not care about Clearance between Shaft and Engine part
Quantity with a slightly different fixing method than other Manufacturer : Pair (for Left and Right) Although it is built to connect Slider,
Although there may be individual differences in the car body, Shaft for connection has almost no clearance with the Engine division
There is a part.
Because I am worried about hitting strangely when vibrating or overturning, cut holes in the part to fix Shaft into long holes
We secured a clearance of about 2 mm.
View detail
To be misled
NINJA400 (2017) Attached to. I was expecting that the price was fine, but I hooked it up to Engine hanger only one place.
Cowl Adjust the position according to the clearance and install it, but as expected it will be Gap if you moss with Bolt 1 pc alone.
Although it has never been mossed yet, Gap is also likely to have an influence such as Crack in Cowl.
Please consider a more decent installation method. What is it, Parts.
View detail
Quality is good
Installed on GSX 250R 2017 ~.
Choice is still cheap because it is not released as much as you can choose.
Tighten the Spacer of different thickness and install it, but installation complete in about 15 minutes with easy to follow Instruction Manual.
Accuracy is no problem Level, but since it is fastened to Crankcase Bolt, it is no problem if you tighten a few Bolts little by little. You can install without removing Cowl at all, so it's completed in no time.
Just with this amount of money, how about Cap Bolt of Uniqlo. At the very least I would like Bolt to use Stainless Steel as well. Because OEMBolt was more textured, Cospa made ☆ 2.
View detail
Very good
It was a beautiful making so it was very good
View detail
It looks nice too!
Compared to other Manufacturer's Slider, it is not attached to direct, so it seems to escape shocks well!
Also, in the case of 14r, the Slider of Over comes to a lower position than other Manufacturer, so even if you defeat it by eggs etc., Cowletc. It is likely that scratches will be less.
Gold amount is higher than others but can be convinced if you think about making.
I have defeated Motorcycle before putting on but I hope the time will not come for Slider to play a role (Lol)
View detail
The price is high, the way of installation is bad
Anyway, Slider, installing Bolt does not fit. Forcibly put on, Slider side is scratched. To install on Body, you can not use Wrench straight, so you can not tighten properly. I bought it and failed.. View detail
Good texture!
I attached it to YZF-R25.
Although I did install it myself, the hexagonal Screw of the installation part was rumored and not rigorous It was hardness.
View detail
I am satisfied..
Compared with other Manufacturers, I decided to install because the installation position is lower.
In order to remove SIDE fin Cover without removing Slider,
It is important to adjust the mounting position, so be careful.
View detail
You can protect the key points.
Purchase for falling.
Because it is protruding from Cowl, I think that you can reduce Damage.
I still do not know the effect.
Just for R25, Blinker seems to be hurt first.
It is best that you do not knock down.
The shape is Sporty, I think that it fits the image of the car body.
It does not disturb driving and does not require drilling of Cowl,
This Recommendation.
View detail
I got this for my friend and they bought the full slider of OVER...front, rear, and middle... alot of people bought this well they liked it alot good price when it was on sale and good quality
I got this for my friend and they bought the full slider of OVER...front, rear, and middle... alot of people bought this well they liked it alot good price when it was on sale and good quality View detail