Reviews
Produk original dari Eazi Grip. Sangat senang dengan produk ini, sangat berguna untuk meningkatkan grip antara lutut dengan tangki baik saat berkendara sehari-hari dan saat berkendara di sirkuit. View detail
Not slippery at all.
I would recommend this one, although the tank is slippery so I couldn't get a knee grip at all and was feeling a little stressed,
As soon as I put this product on, it stopped as if it was stuck and I was able to get a good knee grip! I was able to grip my knees with this product.
It is recommended because it stabilizes the driving.
View detail
Nice product
Hi every one,this is a very good product, it prevents me from sliding forward and it does its job on the track, a worthwhile purchase. View detail
Quite effective! No slipping.
[How is it used?
Purchased for late cbr600rr pc40. had a cheap Universal Type pad but it wasn't good enough.
Was the one you received as per Image?
It is as shown in the Image. It looks like it will Grip well just by its appearance.
Was the installation difficult?
It was easy. Just wipe it down with the included Seat and stick it there.
However, there is no such thing as a Handling Instruction Manual, and the direction to paste it probably turned out to be wrong. I will reapply it next time.
How was your experience with it?
Very good! Grips well and the knee grip makes it less tiring. I bought the EVOType in black because my car is black. I thought the bumps would be noticeable, but they were not. The rubber grips well, so it sometimes got stuck when I was going back to the car in a Large position.
[Included Parts:were they on?
It included a Seat to wipe the area to be applied and some kind of paper written in various languages. Translation (it was not written in Please type here.
[Was there anything that disappointed you?
I would have known what direction to stick it if there had been an image diagram of it after sticking it on the attached paper, but there wasn't, so I didn't know better and stuck it on the exact opposite side. I am able to use it normally, so there is no particular problem.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA XJR 1300
To Knee grip
I chose EasyGrip, but it didn't have enough grip. I am a good flyer, so I think it would be better to choose a product with a higher Grip for such a person. View detail
If you don't mind doing your own processing, it's pretty good.
Grip feel is better than I expected. View detail
Easy to cut and use as desired
It is easy to use because it can be easily cut and pasted into any desired shape. View detail
I use it for GSX R1000
It's less painful than stomping because it's not ThornThorn, and it's more Quantitative.:1 Set of 2pcs. so it is very helpful! View detail
Fits: SUZUKI GSXR1000
Knee grips are perfect.
I used it on my GSX-R1000 K1 and it has a perfect knee grip. The foot does not slip off the tank during short braking, and it makes a series of movements much easier. However, I think the price is still expensive. View detail
As expected, but I think it's too expensive.
Knee grips are excellent and easy to do, and there is no gapping after installation, but they are too expensive, no matter how reliable the product is. View detail
Benefit from Knee grip support
I was worried about the Knee Grip Pad for my GSX1300R HAYABUSA (EJ11A) between OEMPad and this one, but I ended up choosing this one. The color and texture were better than I expected. The functionality of the pad is also good, as I can hold the tank firmly between my knees, and I felt that a knee grip support is a necessity. View detail
It's cuttable, so you can make it the way you want it.
I like the fact that I can cut it myself, so I can make it the way I like it.
However, it is difficult to cut it beautifully! You have to use a sharp knife to cut it.
View detail
Fits: YAMAHA MT-09
Quality as expected
Chose EVO because I like the texture. black is a nice gloss. Of course Grip is stable. View detail
favorite
Quantity:1 Set of 2pcs. You can use it in your favorite shape and large size according to your body shape and position.
I think the adhesive strength is sufficient because it does not shift even if it is used with a small cut.
There is no inferiority in comparison with the products of a certain famous manufacturer.
View detail
Fairly strong adhesion
Normally you would put it on the SIDE of the Tank.
I put it on the Center of the Jacket because the Fastener part of the Jacket hits unexpectedly.
Even so, the capacity is so large that it could be added to the SIDE.
View detail
Fits: SUZUKI GSXR1000
Grip.
I used it on my GSX-R1000 K1, and it grips just by touching the EasyGrip with my knee without consciously gripping my knee. However, the price is too high. Therefore, my overall satisfaction is 4 stars. View detail
Fits: KAWASAKI Z650, KAWASAKI NINJA 650
unsuccessful
No matter how you slice it, it just doesn't feel right for the Ninja 650 2018. View detail
On the SIDE of the CBR650R
[Purchased Kit Lack
If you're a CBR650R rider, you'll know that there are a lot of Tank Pads out there for the 650R, but when you do a knee grip, your inner thighs hit the Cowl underneath the Tank, not the Tank, so the commercial Tank Pads are not practical. I bought this to put on the part of my thigh that hits the knee when I actually grip it.
I really wish they'd release a dedicated one, but for some reason they haven't …
Impressions of use
I made a paper pattern of the area I wanted, then drew a rough sketch along the pattern, then scissors and cutters along the sketch.
It's a great product for when you don't have a dedicated pad, or when you need a little something here and there for your Plus.
I've run with them a few times now and they've made my knee grip much easier.
I've only had it for about two months, but I haven't seen any of the damage or breakage common to cheap products, like tape coming off or rubber tearing!
【Review】
There is a little bit of work involved in processing it yourself, but I thought it was the number one practicality because you can process the original shape and the necessary parts to suit your needs.
The price is a little cheaper than buying a commercial Pad, so I think the cost is the strongest!
If you're riding a CBR650R and want a Pad, I'd recommend it like crazy! It's really useful lol!
View detail
Difficult to process, but the grip is perfect.
This is Type, which you cut and paste by yourself.
As for processing.
It's difficult, so you might want to practice a few times with the parts you don't need. (I should have). 。
I used the Cutter and Scissors together, but the circle is thicker than the other two.
It is difficult to cut straight because of the repetition of areas where the blade can easily enter and areas where it cannot.
I would like to have some kind of cutting machine to position and cut them all at once.
Also, keep replacing Cutter blades with new ones.
As for pasting.
Of course, it's a matter of friction and unevenness.
It's hard to rub it with your fingers after applying it to make it stick. (Eliminate air bubbles) It's hard to do.
If you make a small mistake while applying it, you can reapply it, so apply it loosely.
It is a good idea to keep them close together in a certain place.
It may be similar to Decal paste.
In conclusion, Black is good.
There is no problem at all with peeling. It will be quite large and strange when you peel it off.
As for the texture.
I think it's just like the image. It's not particularly good or bad. It's good enough.
However, I made the mistake of buying the transparent Seat. It should have been Black, which would have made the bubbles invisible.
(I thought that Black would look like White as it deteriorated.)
Transparent Seat is suitable for White and Color:I think it is a light color like Gray.
Knee grip is necessary for correct riding form, and
Since you need to make sure to Form and drive safely even in Touring and city driving.
I would like to see Manufacturer sell a special product for all models that can be called a Sports car with Option.
Lastly, the seat size is listed on the Page of the product description.
In fact, it comes with two Seats of that size.
I bought it because I knew about it in advance from my personal Net information.
If I hadn't known about it, I wouldn't have bought it.
I think it would be better to put this information on the website.
Evaluation items "Use Situation." is between Touring and Circuit for convenience. It is valid for everyone.
View detail
Fits: KAWASAKI NINJA 250SL, KAWASAKI Z250SL
The round warts are a little awkward.
The original color was Red×Black, so it matches without a sense of discomfort.
Just degrease it with the included AlcoholWipe and stick it on, because it's black, and the grip at the time of breaking is a big difference.
It would have been better if there was a diagram to attach it because it was hard to tell if the orientation was correct, and there are no images to search for because it is a Minor model.
As for the texture, I think the texture would be better if the cross section was beveled because it is cut off.
The Pattern was also trimmed off at the corners, so I used Scissors to create an edge.
I'd like to see a Variation of warts like PyramidMatte with square pyramids, because the warts are round warts and personally look uncool.
View detail