Reviews
Fits: SUZUKI V-Strom650 L2, SUZUKI V-Strom650, SUZUKI V-Strom650 XT, SUZUKI DL650 V-Strom, SUZUKI V-Strom650 L2 XT
Engine Guard installed
Installation should not be a problem if you have some knowledge of maintenance.
An Engine Guard was added to protect the engine in the event of a runaway and to mount the Fog Lamp.
View detail
If anything, it's for looks.
For Guard, it's more like a Classic.
I wear it as a stylish point of view.
I am satisfied with the Large change in that respect, but it is still made.
It is solid and heavy in its own way.
I think there are pros and cons there.
I fell over once, but in the end it all depends on the situation.
Bar end mirrors are available.
There is nothing we can do about it and we have scratches on the Tank.
BoltQuantity on the Under Guard side for some reason.:2pcs.
I cut off the whole Plate because it didn't fit in any way.
Uses.
Not a good match with Performance damper
No, but the installation itself is possible.
View detail
Fits: BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler
Standstill protection-Engine Guard
[How is it used?
RnineT is for a low center of gravity, so I knew it would be hard to stand and jostle, but I installed it just in case.
It's been six months since the car was delivered and we haven't had to take care of it yet. (⌒∇⌒)
Was the one you received as per Image?
We had the standard item from Dealer installed as is.
I was worried about the one from rizoma, but this one seemed to be more firmly guarded around the head.
I had this installed because I had the actual product.
I was not particularly concerned about Engine Guard.
Was the installation difficult?
I asked the Dealer at the time of delivery, so the degree of difficulty is unknown.
Probably, it should be Bolt On because it is a vehicle-specific product.
How was your experience with it?
Luckily, we have not been taken care of yet.
But this bar has more to offer than just serving as an Engine Guard.
I've seen people use it as a Mount for Fog light and ActionCamera.
There may be times when you use it that way….
[Included Parts:were they on?
I don't think there was any problem.
The optional Wonderlic ProtectionPad for Engine Guard/Tank Guard (item no. W35833-002) can be installed.
[Was there anything that disappointed you?
This does not mean that they are disappointing, but they do look a little stiffer.
That is cool, so I guess it is a preference.
I am planning to install an Under Cowl in the future, and I am wondering if I should remove the Engine Guard at that time, or keep the Engine Guard installed and install the Under Cowl. (I heard there is such an Under Cowl. I'm searching for more information now.)
View detail
good for my G310GS
it is a perfect product for G310Gs,it is very enought to protcet my motocycle and it looks is so cool,i suggest everyone to by this View detail
Fits: BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler
Good thing I left it on.
Since I had the dealer install it when I purchased the vehicle, I won't give an evaluation of the installability.
First, the appearance.
The car has a lot of black parts including the frame, and the black engine guard grows out of the black frame, so it doesn't feel unnatural even if it is covered with a silver colored Hend Cover.
And the important thing is that the protection is godly!
Quantity of so-called "standing moss" on a public road:Pair (for Left and Right) I defeated each of them once, and almost all of them had no damage except for the Engine Guard.
(This is only our experience. The results may have been different depending on how and where you fell)
When I tipped it to the Right, I had the Tandem Footpeg out, so the Wound was in the tip of the footpeg. If I had stored it, it would not have grounded.
Quantity in low position:Pair (for Left and Right) The end of the handlebar extends to the top of the handlebar, so the end of the handlebar won't be grounded by a mishap.
Therefore, it is easy to wake them up.
For the repair, I roughly dipped the paper file in it, blended it in, and painted it black with Touch pan.
It is recommended to wear it if you are not sure about your footing or leg strength.
View detail
Fits: BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler
2021 rninet.
I wasn't sure if I could install it on my '21 rninet, but I did.
Compact, discreet and solid compared to OEM.
I think it is better to do the installation work by two people as much as possible.
You will need someone to hold the Wrench on the One Side when you tighten the Bolt at the top.
You will also need a screw lock and a T55 Torque that can be removed.
Apply a small amount to the tightening bolt at the bottom and tighten, as the vibration may loosen the bolt.
I installed it by myself, but it was Large strange not to put Wound on Engine etc.
View detail
I installed the Engine Guard and took it down. GSX-S125]
https://youtu.be/VqFreRzr1to
Engine Guard installed:https://amzn.to/3sWRcNO
Hepco & Becker I installed Motorcycle's Engine Guard for the first time because I was afraid of tipping over.
This is a husband and wife Moto blog.
Because my wife wants to ride GSX-125, I installed it by the fall of the day when I ride it by moped 2 class Touring someday, and the countermeasure against a standing fall.
It was my first Custom and it works. I recommend it.
View detail
Fits: SUZUKI V-Strom650 L2, SUZUKI V-Strom650, SUZUKI V-Strom650 XT, SUZUKI DL650 V-Strom, SUZUKI V-Strom650 L2 XT
Expected
I originally thought about getting the OEM one, but they didn't have it in stock and the price was a little cheaper, so I went with this one. The weight was a bit heavy, but not too heavy. I've been using it for a few years now, and I've never had a problem with it. If you think of it as insurance, it's cheap. I was able to install it myself if I had the necessary tools. My car was made in 2018, but I was able to install it normally and without any problems. The instructions were translated (not typed here, but the diagrams and pictures were sufficient). View detail
Fits: SUZUKI V-Strom650 L2, SUZUKI V-Strom650, SUZUKI V-Strom650 XT, SUZUKI DL650 V-Strom, SUZUKI V-Strom650 L2 XT
For standing moss.
The Parts is just right without being too assertive. Is the system slightly distorted? I had no problem installing it. View detail
It's quite authentic.
I bought and installed this product just in case my motorcycle had been knocked over in the past and was covered in scratches.
The installation is quite Large strange. But it works well.
good point
The body of the car almost collapsed in the earthquake, but it was safe.
This product is designed not only to protect the engine, but also to prevent the rider's foot from getting caught in the hanger when falling.
Very sturdy.
The body of the car will be stable.
A bad point
Installation is troublesome.
Unlike a car, a motorcycle has two tires, so falls are inevitable, and of course you need to be careful, but you also need to be prepared for accidents. These parts can protect both the vehicle and the rider.
I was really sad when Motorcycle was knocked down in the past, I don't want to experience that again.
Just in case.
View detail
Fits: YAMAHA Tracer 900, YAMAHA Tracer 900 GT, YAMAHA MT-09 Tracer
Rugged Tough Image
We are using this on my father-in-law's 2017 ToRacer. Actually, he had this on one of the 092 mt's we owned before, as it was a STREETRALLY 50 Spec. It looks great on my father-in-law's ToRacer. It is very Race ish and sturdy construction. The only drawback is that it gets in the way when you hang off. View detail
Good as Fashion
1 place is Quantity:Pair (for Left and Right) I'm worried about the strength of the protector because it is only connecting the protector of the two. I am worried about its strength. It may be designed to release the shock by the weak point of the protector being bent. Other than that, it is easy to install, and I like it. View detail
Fits: DUCATI Scrambler Sixty2, DUCATI Scrambler 800
Low accuracy
It gives me the peace of mind that it's better than no Engine Guard
? The Screw pile of the included Bolt was distorted and was not useful as it was
? The molding accuracy of each part is low, or it cannot be installed without forcing it into position
? There is a part where the plate bolts hold it in place, but the head of the plate bolts is not inclined to fit in
? In my case, the OEM footpeg, in the Lever position, my toes are in the Engine It may interfere with the Guard, which may interfere with the operation of the rear brakes, and may also interfere with Shift It may invite mistakes
View detail
It is hard to install
"I want Engine Guard to prepare for any chance, but I do not want to become a learning car ... .... "
When I thought I found it, I got it love at first sight and bought it!
"Small firmly feeling with swinging will surely protect you ....... "
If you say what to put on stand up in the second week!
Imagine awaiting and immediately wake up and check for scratches.
"Is that soil at the end of Handlebar ...?"
Apparently, it seemed that Handlebar and this Guard first contacted the ground and protected Tank, Engine, footpeg and others. Thanks! I will not beat it anymore! (Even if I kicked out about 20 times out of compression, it did not take Engine ... .... )
Function and appearance were satisfactory, but the installation was Large strange.
The Instruction Manual was German! Well as I expected.
Although there are few mounting parts, Bracket where Frame and Engine are fixed (I feel that it was a part like Curry 's Nan) Instead of tying this bodys together, this is a hard time.
There seems to be some distortion in the product, Quantity : Pair (for Left and Right) Do not match if the hole positions do not match.
The hole position was up and down 2 cm. Even though PenetratingBolt .......
With Driver, we shifted position and finally installed successfully! It took about 3 hours to complete!
Anyway, if you want a durable and Small Engine Guard! For those who like it is strongly recommended.
There is a feeling that the center of gravity changes slightly because it is quite heavy so there is attention!
View detail
Fits: BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler
Comprehensive satisfaction
I bought it from anxiety about standing gobble etc.. Because it is Exclusive Design, of course it will be decided.
I made it to black, but I am surprisingly unconcerned with chic and I like it.
Compared to Cylinder Head Guard, it is roughly comparable, but it is good as we are winning in terms of protecting the Engine.
Installing by yourself Because Torque management of Screw was suspicious, I brought in with Dealer and brought in.
View detail
Fits: BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler
Is there peace of mind?
Frame has changed since the 17th year and Engine Mounting Bracket on Left has been added.
It is difficult to install by interfering with some products.
In the case of FlatTWIN it is a place to worry about whether it is Guard or Cover, but whichever you put it is Parenthesis so bad - - -
View detail