Reviews
18-year old BirdCity125 (SEC-1J) Fender Eliminator-ization of
I wanted to change the Fender Eliminator on my '18 BirdCity125 and move the RearCameraPosition on the DriveRecorder to the original Reflector position. I was also convinced that the size and design of the '17 BirdCity155 and the '18 BirdCity125 were the same, so I checked the specifications and looked at the rear view of both vehicles to make sure they were the same and purchased the kit.
The first thing that puzzled me when I received it was that it came with an LED License Plate Lamp.
I had ordered a KOSO Bracket with License Plate Light because I thought I had to prepare and install a License Plate Light separately when converting to Fender Eliminator! I had ordered a KOSO Bracket with License Plate Light, so I had to return that one!
When machining, the Fender is removed from the body and masked according to the Instruction Manual, then carefully cut using a blade for plastic or PPMaterial, and then file it with Paper No. 100 or higher to cleanly shape it.
For installation on the vehicle body, the License Plate is temporarily assembled, and holes are drilled after checking the position and levelness of the holes and marking.
The 7mm hole was specified, but I don't have one, so I used a 6mm drill and had no problem.
The holes drilled are also cleaned up with a stick File.
Wiring of License Plate Light is cut by Lamp side Limit of OEM License Lamp to use OEM Coupler and Wiring, and after wiring process, it is crimped to Female Bullet Type Terminal.
The wiring of the attached License Plate Light is also crimped to Male's Bullet Type Terminal, and since the wire is very thin, a solder is added to connect both.
The light came on safely when I installed it in the car body and turned on the main key to check the light.
Just to be clear, on the body side, Black is Minus and Blue is Plus.
On the License Plate Light side, Black is Minus and BlackWhite is Plus.
The wiring routing was done using the hole where the Reflector was originally attached, and the process was completed in the space on the reverse side of the Reflector.
After that, side cover, helmet in, etc. were all put back together, and this Bracket was finally combined with DAYTONA's with ReflectorLicense Plate Bracket and attached to the vehicle body to finish the work.
In summary, the License Plate Light is quite bright and the position of the light affects the RearCamera's image at night, making it appear bluish.
I have found that shading the tip of the camera lens with something that can be used as a flange will solve this problem, so I will take measures later.
I am very happy with the Refreshing Rear, which was heavy.
The drawback is that when the side cover is removed for maintenance or adjustment, the bracket is directly attached to the side cover, so it has to be removed, which increases the time and effort required.
As a supplement, it is not compatible with MODELs prior to 18.
Also, we do not know about BirdCity after Model change, so it is only BU54 (SEC1-J) Conformity with respect to (Diversion is possible.) Please understand that
View detail
US Buyers Read First
2016 Yamaha Zuma USDM. The part is very good. The fit and finish is fantastic and the install is pretty straight forward. BUT if youre in the US, this part will remove your OEM license plate light, so what you will need to do is cut the bottom oval of the black plastic tail light surround. The models outside the US have this precut, but we only have the outline. This will allow the tail light to serve as the license plate light. If you look at the description pictures on the listing, you'll notice the light hole. ALSO, the part is for plates somewhere outside the US therefore the license plate screw holes do not match up, you will need to re-drill two holes closer to the middle of the plates. I got the kit that ustilizes the OEM reflector, but shortly after install, I cut that bracket off for a reflector delete. View detail
Fits: YAMAHA CYGNUS X (4-inch) EBJ-SEA5J, YAMAHA CYGNUS X FI (SE461), YAMAHA CYGNUS X FI (SE462), YAMAHA CYGNUS X (4-inch) SED8J, YAMAHA CYGNUS X (Model 4) SEA5J, YAMAHA CYGNUS X (4-inch) 2BJ-SED8J
Nice price, but the shape is good.
OEMFender to be removed and installed Type
Refreshing the best on the market.
All the back must be removed from the Seat to install it.
Large oddity.
By the way, there is no manual enclosed on how to remove it, so if you can't do it, pay the labor charge and have a PRO do it for you.
Reverse side is bare Wiring, but there is a Fender on the Tire, so it may be Large sturdy.
View detail
Question on quality
The thing is nice and cool, but the License Plate Light ran out halfway through the month. View detail
Parenthesis will be better, though.
I don't like the OEM chunky back, so I decided to Fender Eliminatorize it.
If you want to look cool or compete in the Race, I'll recommend you.
I ended up going back to OEM because I was worried about the Garbage jumping up.
good point
It becomes cool by making it to Fender Eliminator.
It doesn't look like a moped.
A reflector is also included for added safety.
Easy to install.
A bad point
Chatter sound around the Rear will increase.
● The mud bounces up.
It's difficult to balance parenthesis and practicality, and this product made me think about that.
View detail
I bought this to make my GSX-R125 more parenthesis friendly.
I bought this because I didn't like the OEM very large Fender and wanted a Fender Eliminator.
I chose this Manufacturer's product because it was the shape that I liked the most after comparing the installation pictures with those of other companies.
Needless to say, the Fender will be gone, so water will be rolled up and the back and Rear Sets will be dirty.
View detail
It's justice to look good.
I bought this as a Fender Eliminator to go with the stylish design of my newly purchased Special Knife Address110 for commuting. If you have a regular sander, air saw, electric Drilletc. or a regular maintenance person, you will have fun and complete the work in less than an hour. screw lock and SpringWasher are good to have ready. View detail
Fits: HONDA LEAD110 (EX) (EBJ-JF91), HONDA LEADEX 08.01- (EBJ-JF91)
Rear Area Refreshing
It is very helpful because the reflector is also included. View detail
The NumberLight is dangerous
The ease of installation of the Number can be done by anyone with a tool, but the NumberLight's Wiring process is a little complicated?
In particular, NumberLight does not paste well and peels off
Other than that, the Fender is gone and the angle is Mischief It was cool
View detail
Tighten up around the rear
I think the long rear Fender is the reason why it looks like an old man's motorcycle Replacement The result is quite young
Installation is simple; the claws on the Cowl need to be worked carefully so as not to break Especially the cowl under the tail lamp should be pulled straight back
Replacing License Plate Light is also surprisingly easy
When it rains, it picks up a lot of muddy water, which makes the carrier and the tail lens a mess There will be none
View detail
Refreshing a stretched out Rear Fender, looking young!
I bought the Fender Eliminator to make the rear view look more youthful
As expected of ADIO, the production is solid And it is safe because License Plate Light can be ported
There are two types of Reflector:one for OEM use and one for this purchase with Slim Reflector I have a thing, but it was about $1,000 more expensive because I wanted to give it a Refreshing feel! has made this product
The installation took about an hour
The instructions say to remove the tail lamp and cowl, but the Helmet in and Fender BoltQuantity:Remove the 2pc and you can get the Fender (requires a bit of a hang It's only at your own risk! (Laughs)
If you have come to this point, you can install this product and handle the wiring of the License Plate Light (Secure with Tie Wrap) and you're done
The position of the number can be fine-tuned so that it is in the center of the vehicle
My impression of the installation is that Parenthesis is better than I expected!
If you have a CALI Sticker plate, it may interfere with the vehicle depending on the direction of the plate I have changed the direction of the plate (I have to go get a sticker!) and it won't stick straight I changed the direction of the Plate to deal with it (I have to go get a sticker!)
Recommended for people who want to make their rear end refreshed and give a custom look !
View detail
Neatly organized around the rear
Installation is pretty Large weird If you have power tools "Cut" "Cut" I think you can save a large amount of time with the process of
If you can take the time, I think it's possible to use Saw and File etc. without power tools
Drilling is required for installation, so you need to have a drill
It takes a lot of time and effort, but you'll be thrilled when it's completed
Disassemble again by re-tightening the mounting screws when they come loose
I shudder to think of what I would do I wanted to have at least a screw loosening stopper included
View detail
Making is good for the price.
Purchase to get Fender for GSXR 125.
I was worried because it was cheaper than those of other companies, but the making was firm without BALI, and Screw Pitch etc was easy to install because of insanity.
However, since there was no Space like Reflector 's Bracket which can put two kinds of Seals, Performance only ★ 4.
View detail
Quite good
Even though the installation Bracket, originally one for each for Rightfor Left, must be included, but when I purchased it ... which one was for sure which two for LeftBracket was in and for RightBracket It was in a state not in existence. For that reason, I contacted Webike and got RightBracket sent ... ... etc .. Although there was a sorrowful one, there was reconfirmation that it is a good thing in the middle if installed.
It looks better and it is wonderful to say "It seems to be sturdier" than anything above OEM above anything, so if this is a little or gentle vibration it is Hetchara Hui. License light is also bright with LED, White .......
For those who are sturdy and still looking, I would recommend this. If you correspond to the model
View detail
cool
Compared with some Fender Eliminator, I feel texture, Style seems to be good so purchase.
Large strange as I have to remove a lot of OEM removal, but those who can clear them without problem
I think that it is affordable for installation.
Fender cut and drilling are unnecessary. OEM Wiring to install License Plate Light
It is necessary to install it by Cut, but included in Kit LED Wicing of License Plate Lamp is very thin
Therefore, rather than using the included Bullet Terminal terminal, it is recommended to connect with a connection terminal for fine wires such as Emon.
A person who wants to use Blinker other than OEM structurally considerably devises or does not recommend it because it can not be attached unless the installation position itself of the Blinker is changed to the car body.
Blinker is firmly attached to good people at OEM, Refreshing around Rear and texture is perfect.
View detail
Mounting on CYGNUS X
Rear surroundings refreshed.
The manual is small and it is very hard to see.
It is appreciated that we can reuse OEMFender as it is.
Drilling is necessary to install Reflector.
In terms of Cost I think that it may be a little cheaper, but I was satisfied accordingly.
View detail
It cannot work, if a description is too suitable and there is no Service manual. Although it is a mechanic of a we car, is attachment serious if it is the more general one? I want you to write a description kindly more intelligibly. Quality and a thing
It cannot work, if a description is too suitable and there is no Service manual. Although it is a mechanic of a we car, is attachment serious if it is the more general one? I want you to write a description kindly more intelligibly. Quality and a thing are satisfactory! It is the highest, if it can do and I will have a Nut of Number light welded... View detail