Reviews
Fits: DUCATI 959Panigale, DUCATI 959Panigale, DUCATI 899Panigale, DUCATI 899Panigale, DUCATI 899Panigale, DUCATI 1299Panigale, DUCATI 1299Panigale, DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale
Purchased for StreetFighterV2.
Purchased for Street Fighter V2 from the Parts List after confirming compatibility.
The ground surface of the STAND is small, so there is some concern about hanging the STAND on soft ground.
Clearance with Under Cowl was no problem, and it was easier to STAND.
It is not cheap, but if you feel Merit in increasing the ground surface of STAND, you may purchase it.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
demon who obstructs sentient beings from maintaining moral behaviour
The ground penetration was reduced, but not as effective as the price, and eventually they got in the way and were removed after a year or so. View detail
Fits: SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1200
Area0 Height0 Screw×.
In terms of extending the height and area of the Side Stand, it is a very satisfactory product.
However, the included screw is too short and loosens after continued use. Screw locker is recommended.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
After waiting for so long, is this the extent of Level, Webig!
Item #:PKS0035SI, no doubt, but the design is different from what's pictured!
If you changed the design, shouldn't you change the picture too?
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000
The product photo and the actual product are too different.
The product picture is too different from the actual product received.
Notes. The photograph is an Image and may differ from the actual product. I think it says something like that, but it is too different.
I paid almost 9,000 yen expecting to see a picture of the product, and this is not what I got.
depending on the person "There's R&G." And "It happens all the time with R&G." It is said that the WeBig side of the product listing
I think it's a problem, don't you?
Please compare the product photo with what you actually received.
The picture was taken at Image..." I don't think it can be done.
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750
Safe when the ground is soft, such as gravel!
The image in the product description is a Sample!
The item you receive will be the Type in the picture.
A little cheaper would be appreciated w
View detail
Fits: MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4 RR, MV AGUSTA F4 RC, MV AGUSTA F4 RC, MV AGUSTA F4 RC, MV AGUSTA F4 1000R, MV AGUSTA F4 1000R312, MV AGUSTA F4 1000R312, MV AGUSTA F4
R&G Stand High Bracket
Italian Motorcycle Side Stand is terrible so …
Especially the AGUSTA system is a must!
It's also more stable.
It is easy to STAND out and easy to kick up and deliver.
https://ameblo.jp/keikocookingchicken/entry-12674055267.html
View detail
Fits: HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200
In a place with bad scaffolding.
It's nice and stable when stopped. The texture is also good. View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R
Good stuff, but expensive
When the Side Stand is applied, it is extremely tilted to Left for some reason I bought it because I felt uncomfortable that I didn't feel like I was standing on a stand, I had a good sense of security and accuracy, but it was a bit more Smaller looking is better looking View detail
Fits: HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200
It is easy to install
Prevents falls from caving in on gravel roads and asphalt on Side Stand
However, sand and other small things can get inside..
View detail
Fits: HONDA CRF250M, HONDA CRF250M, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L
2016:Used in CRF250L
It was supposed to arrive on 2/17, but I received an email yesterday saying it was shipped today
I felt happy that it was faster
I had been looking for it for a long time, but it was only R&G and the price was too high, so I was hesitant to buy it It was on sale at the end of the year for about 5,000, so I bought it
The installation was still easy when installed on a new car, I think, but in two years Side Stand The ground surface of the
The Stand End part was corrected and polished with the knife sharpening File and finally entered exactly
The screw is so shallow that even a little distortion is not allowed
The finish is beautiful
That's the R&G company
Finally, you can now park in mud and loose surfaces
Molybdenum grease is applied between the Stand End and R&G's Shoe Locking fluid is applied to the screws to prevent rust and detachment
Thank you very much
However, the actual finished product was better, although it was a bit different from the photo
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Ideal for soft road surface
If Normal muffler raises STAND, Limit does not hit Clearance. Since installation is Small compared to STAND, even if you hang it down, it does not enter. Although I was worried whether to cut or not, since the material is Aluminum, I applied Dustcloth so that scratches did not get into the STAND, and when I hit it with Praghan, I could install it. It is good to think about it because there is no play. View detail
Fits: TRIUMPH TIGER, TRIUMPH TIGER, TRIUMPH TIGER
Material is good but can not be installed.
I bought it for TIGER 1050, but I can not stop Screw as it is because the tip of STAND does not fit. There was no notice that it could not be installed unless it was cut. View detail
Fits: DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Scrambler Classic, DUCATI Scrambler Classic, DUCATI Scrambler Classic, DUCATI Scrambler Icon, DUCATI Scrambler Icon, DUCATI Scrambler Icon
The angle at parking is standing and it is a nice feeling.
When parking in the side of the road, if the road is a kamaboko type,
The car body as compared to placing it in a horizontal place (Sleeping too much) I will.
When this product is installed, Side Stand becomes about 5 mm longer
A little angle of Motorcycle will occur.
Although it is just a little change, I feel like I can easily raise a single car.
However, I knew it after purchasing, but similar products are on sale in other Manufacturers,
Especially what made by TOURATECH is cool with DUCATI with Logo.
I hope that it will help prevent snagging on lawn such as Camping place.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
The mounting accuracy is bad
GSX 1300 R HAYABUSA has a large slope when stopping at Side Stand, so weigh down when raising
I bought it in the summer to prevent STAND from getting into Asphalt.
Mounting is essentially just fitting and tightening 3 Screws.
However, unfortunately it is not possible to enter either STAND or product.
I deleted STAND with Grinder.
Since the depth is small and the STAND does not run even after cutting it, it is impossible to put on the top covering?.
You can not install it unless you cut the depth of the product or cut the back of the STAND to thin it.
I built my own Spacer in between.
Another Bolt was necessary because the Bolt's Length is insufficient with Spacer's thickness.
It may be different depending on the type of car, but I did not buy it if I knew that it was necessary to process this much.
If you are not confident in machining tools or machining, I think that you should ask Shop for installation.
Nice place
- You do not have to take things to lay under STAND in the summer.
- Since the STAND becomes longer by about 5 mm, it is easier to wake it from the time of stopping.
A bad place
- The mounting accuracy is very bad..
- Price is too high.
Others
- For vehicles that are Lowdown by footbed countermeasure, STAND is about 5 mm but it gets longer.
- If there is an Exhaust System on the side where the Side Stand is located there is a possibility of contact during storage.
- It takes a car weight and contacts the ground so it's a bit sad to be scratched (Lol)
View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
To people with short legs - - -
【What made you decide the purchase?】 When stopping at soft soil, STAND was sunk and scared because it was scary.
【How was it actually trying?】 It can be stopped steadily even on soft soil and it also makes it easy to cause riding when on board.
[Is there anything I was disappointed about?] None
【Hope for Manufacturer - Please let me know if there are any improvement points; Please make it a little cooler design.
【Have you compared items?】 D company STANDLARGER
Product of D company bought by looking at the conformity table but purchased it, I returned it with absolutely different dimensions to the extent that I think that installation was confirmed?. I was on the 13-year CBR600RRJapanese specification, I thought that the STAND shape is different in the reverse car, but as I was able to attach the R & G product of this foreign Manufacturer - - - Company D - - -
Apart from that - - - I am a short-standing SS rider. In the case of stoppage, I put my feet on the right for short legs, but I put my feet on Right, but in order to get ass to Right it is difficult for my legs to reach when giving a STAND with Left feet, so it is difficult to get out of STAND. However, when attaching this product, the point of STAND got heavier, so if STAND 's feet arrive even a little bit, STAND will come out spatially! Afterwards if you attach this product you get a little car body so get on When it happens, the cause is easier. When I saw the product of company D, he said, "Large younger than I thought - - - I thought that this product is exactly Large Kimono. Even though it became easier to put in and out of STAND as a by-product, this item is a divine item for me with short legs - - - It is Recommendation for people who are difficult to put in and out of STAND!
View detail