Reviews
Simple and good.
I think this is a good product for a Simple and Custom feel with a Core standard.
I had this one on my previous Motorcycle, so I chose this one again.
However, it would be better if it were cheaper….
View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
Expensive but satisfactory
I feel safer with it on and am happy with the way it looks. View detail
With a little work, it could be installed even with Cowl installed.
Radiator core guard on ZX-6R with no Option setting in OEM
Since it was a new car, we wanted to install it while it was new, so we selected Trickster's product, which was one of the first to offer compatibility with the 24-year model.
I was wondering if it was that large since it arrived from Webike in 120Size. I wondered if it was that big, but it was mostly packing material (laugh).
We believe that the curved RadiatorCore is designed to fit the curved RadiatorCore so that it does not deform due to its easy bending.
Thank you very much.?
The Instruction Manual says to remove the cowl, but I read in a past review that it can be installed without removing the cowl, so I decided to take the challenge.
When I applied it with the packing material still attached, it looked like I could manage without removing the cowl, but the Horn was in the way of hooking the upper three claws to the top of the RadiatorCore, so I removed it, removed the packing material, and installed it without problems.
However, it may be tough to remove and install the Horn and the lower OEM mounting bolt without a tool that can be applied force even in a tight space.
Also, please note that there is still a possibility of scratching the Cowl and Front Fender.
Too bad it doesn't stand out much on Full Cowl cars when installed.
View detail
Easy installation and dress-up effect
Installation should be very easy.
The Instruction Manual was so simple that it was misinterpreted and installed incorrectly, so we had to start over.
It is not usually a place to look closely, but there was a spot where the Core had been crushed after about 1,000 km of driving.
I regret not putting it on sooner.
The screws on the underside of the guard are difficult to reach, so it is better to close the guard with the Glasses than with the Ratchet.
View detail
Tightens the atmosphere around the Radiator
The OEMBolt was installed with no problems, it is SMART than the OEMGuard, and the Radiator is more secure in terms of protection. View detail
Compatibility outside of the applicable model year
It is a 2019 and I was able to install it with no problems. View detail
Fits: KAWASAKI Ninja H2R, KAWASAKI Ninja H2, KAWASAKI Ninja H2 SX, KAWASAKI Z H2, KAWASAKI Ninja H2 SX +
Mounting Large may be strange.
I thought about attaching it myself, but I would have to remove the cowl and pass it through the gap between the Horn and the Radiator fins, which would cause scratches and bump the Radiator fins as well,
I am going to pay the place I bought Body to put it on for a labor charge.
View detail
TRICKSTAR Trickster Radiator core guard Black Plating
I was hesitant to buy it because I felt it was expensive, but once I bought it, I was satisfied. View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z800, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI VERSYS1000
Trickster Radiator core guard
I was not sure whether to choose Silver or Black until the very end. In the end, I decided to go with Silver, but the part that used to be pure Black is now Silver. A Sense of Change." Silver will be Accent, and Black will look natural, so you can't go wrong with either (your choice). View detail
Change from OEM
This is a change from OEMCore guard.
It looks nice, but the grain is finer than OEM, so we will have to wait and see how the cooling effect will be.
It would be even better if the price were lower.
View detail
It's the wrong year, so please return and exchange.
The product that came with the order year 11-20 is listed as 8-16 The product is still unopened, so please return or exchange it.
I'm in a hurry, so please send me a Large ASAP!
View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
Satisfied
Purchased in October. The mesh is fine and seems to protect the Radiator from small flying objects (stones, etc.). On the other hand, I feel that the water temperature rises faster. This is a good thing in cold weather because the ideal water temperature can be reached quickly, but what will happen in the summer? I hope it does not exceed the capacity of the forced cooling fan. View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
To Guard Radiator
I was looking for something easy to put on to Guard Radiator.
It could be installed without removing the Cowl.
Large Satisfied
View detail
Not too conspicuous.
Buy Black Plating.
The body of the car is Color:Gray, so the subdued Black Plating is a nice touch.
I am satisfied with Large because it is easy to install and ExactlyFit and does not wobble.
View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
Good looking and easy to install.
Cowl does not need to be removed to work!
*Extreme care must be taken not to bump it. At your own risk!
Looks great! No distortion etc.!
It is difficult to evaluate because it is a "can't fall down" kind of Parts.
I guess my only concern is the high … price.
It would have been … nice … if it was at least in the low 10,000s ….
I'm not sure if it's OEM or not, or if it's an unspoken price collusion thing, since the prices of Large Brand's products are all the same.
View detail
Stepping stone prevention
Mesh is fine and stepping stones can be guarded, good construction! View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
It's looking good!
I installed this on a 2022 ninja 400. It is very solidly made, and there is a clearance between the radiator and the steering wheel, so there is no chattering sound while running. The attached screws are also made of stainless steel. (Aluminum?) The white glue is not easy to rust. One point of concern is that the White-like adhesive for attaching the Trickster Logo is sticking out, so be careful if you are concerned about the appearance. View detail
Fits: SUZUKI GSX-S1000, SUZUKI KATANA, SUZUKI GSX-S1000F
I feel that both the product and the installation are better than before.
Three years ago, I purchased Trickster's Radiator core guard for my ZX-10R. This time, the claw part has abyss rubber and cushion rubber for cushioning between the Radiator and the guard, so it is not difficult to install. I felt that it was not difficult to install and that it was getting better.
It was a good decision to choose Black Plating for the color. It's so beautiful and looks GOOD!
This time, there was a lot going on with the delivery, but I am very satisfied with the product.
In the future, we would like to look at the condition of stones and other objects entering between the core guard and
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z800, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI VERSYS1000
I just want to decorate a little!
Smooth from ordering to arrival, 5 minutes to install as soon as it arrives, and the job is done!
Satisfied with the texture (the stainless steel shines beautifully)
The next day, when I rode out and came back, there were quite a few Small bugs on it!
I am satisfied that the Radiator core is well guarded (it was cleaned immediately after wiping with a wet towel).
I'm sure this one will be Large sturdy, even with the stepping stones!
It looks cool and LargeSatisfied!
I think the price is also reasonable since it is separately made by Guard.
View detail
fine mesh net
DesignLiked it and bought it.
I'm happy with it
View detail