Reviews
perfect!!!
It is perfect fit my ZX-10R 2016. I have many pictures,but the website only can let me update 1 of them... Thanks all the same. View detail
Like an OEM
Installed on a 2016 Z1000
It takes less than 10 minutes to install
If the Nut on the Silencer side is not loosened a little, it will not fit Exactly
It's as if it's been there since the beginning
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE
helmet lock
During the tour, the helmet was a big load. I was eating and drinking coffee, so it was not uncomfortable to carry it in my hand. I waited for the helmet lock to come out for a while and then installed it. I like it, so please try it too~^^ When I was on the tour, the helmet was a big burden. It was not uncomfortable for me to carry it in my hand when I ate the coffee that I was eating. I was waiting for the helmet lock for a while. I also like the design and the key tick opening when I open it with the key. translated by Google Translator View detail
Fits: BMW R1200GS, BMW R1200GSAdventure, BMW R1250GS, BMW R1250GSAdventure
it is very good but...
it is very good product to use it but to install it, you need rachet to take out volt on tendum frame. i gave to take it out and went to center. anyway i recommend this to everyone. very good one. thanks. View detail
Fits: KAWASAKI Z125 Pro, KAWASAKI Z125 (16), KAWASAKI Z125 (16)
Convenient to have
At first I thought I didn't need it, but it's very convenient to have it I didn't have a place to put my helmet, so I hung it on the Mirror or something like that, but it's very safe It was helpful It is useful to have View detail
The more you put it on, the easier it will be for sure!
The CB750's Helmet holder is a front and rear integrated type that needs to be removed from the Seat It is
It's very tedious to remove the Seat every time, and if I had a SeatBack on the Rear Sets It doesn't work
When I was on the GSR250, I had to remove the Seat and use Helmet lock on the Type that I had to remove the Seat I did
The Helmet lock is bolted to a high position so that the Helmet is not visible No contact with the Exhaust System
(If you don't use the LeftRear Footpegs on the GSR250, the Helmet will be (Exhaust System has been contacted)
However, the LeftRear blinker interferes with the Helmet (Inner part of the Helmet) (into) and
It was installed from the top of DAYTONA's RearCarrier stay, but we were able to install it safely has been created
The time it takes to stop and leave the Helmet on the motorcycle is extremely large has been shortened to Large
When you put the DRing in the lock and fix the helmet in place, it's sometimes difficult to pull out the key and
One more key is a MinusPoint
Overall, I really like it!
View detail
Divert from Z250 to BANDIT1250
The NAKED version of BANDIT1250's Tandem step holder has a different shape from the S and F versions Because it is different (S/F is V-shape and NAKED is oval-shaped), KIJIMA's holder for 1250 is I can't install it (I can force it on with a scratch in mind), but it's another option I bought one for the Z250, which has a similar shape, because the one made by Babyface is expensive
I was hoping to adjust the position of the Screw holes or, at worst, make my own bracket and use the key alone It was there, but it just fit without any processing at all
It doesn't look uncomfortable and is easy to use
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE
Perfect
It's easy to install The helmet lock key is a little long, so I have to worry about carrying it normally. (If you carry it like a bike key, it will scratch near the key box.) View detail
Fits: YAMAHA YZF-R3 ABS, YAMAHA MT-03, YAMAHA MT-03 ABS, YAMAHA MT-25, YAMAHA MT-25 ABS, YAMAHA YZF-R25 ABS, YAMAHA YZF-R25 ABS, YAMAHA YZF-R25
Convenient
It's a Style that seems to have been on from the beginning, like an OEM, and it's very useful It is Neck that the key is increased, but it can't be helped I think it is a little expensive View detail
It's solid
Installation is done by placing an iron bracket under the Left Side bolt in front of the Rear carrier It's installed with a bite... just the right amount of space, no interference from the Helmet, no problem View detail
Fits: KTM 1050 ADVENTURE, KTM 1190 ADVENTURE, KTM 1290 SUPER ADVENTURE, KTM 1290 SUPER ADVENTURE
It was impossible to install
This is a 2017 KTM 1290SUPERAdventureS, but PowerParts' Carbon Side Fairing(Ref):Not for installation with Carbon Side Fairing (60303965044) Since there is no helmet holder, you can't install it unless you cut or remove a part of the It's a shame (If your car does not have Carbon Side Fairing, I think you can install it without any problem (The "Mere Old Man View detail
Fits: TRIUMPH BONNEVILLE T100, TRIUMPH StreetTwin, TRIUMPH SCRAMBLER
Function is sufficient
I bought it to install the side bag when I go to Hokkaido touring It is easy to install and it takes about 15 minutes for both sides
Side bags are The Tanax Moto fizz MFK-135 I've been using it for a while now and it has served me well without any problems
and KIJIMA Helmet lock HTR-05006 But if you add Support, you can use Helmet lock as it is It's gone So, it is a little Parenthesis bad, Helmet lock as shown in the picture It is mounted at an angle pointing upwards
View detail
Fits: KAWASAKI Z125 Pro, KAWASAKI Z125 (16), KAWASAKI Z125 (16)
I have to admit, I hate the way this thing rocks
I used to have an OEM Helmet lock on my HORNET 250 that would snap shut when locked, and I'd have to go back and forth between the two I liked this one
But in the case of the ARAI Helmet, the strap is short, so it's pretty tight, even with the Assist It may be good for ARAI to open the lock part
That and the casual one-keying of this is also good
I think it's a very natural mounting position for the Z125
View detail
fast very good
this is qulity very good! fast delivery. Now I can save my helmet. In the meantime, I always put my helmet on the seat. Thank you. View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
Helmet lock
I was tired of not having any were to lock my helmet. I have a 2018 Suzuki gsxs1000f it didn’t come with a helmet lock. I bought this very easy to install comes with spare key.It works great now I don’t have to carry my helmet around everywhere.I just lock it on the bike and I’m done .graet product, great quality product. View detail
Fits: BMW R1200GS, BMW R1200GSAdventure, BMW R1250GS, BMW R1250GSAdventure
I am satisfied.
Originally it does not have a Helmet holder, so when you go out you put it in the Pannier case or you had to prevent the theft with Wire lock, but after installation you can lock it easily so I think that it is a high product of COSPA.
However, when removing Bolt, it is fixed with an adhesive that is not loosened, so be careful not to lick it.
View detail
Lives up to expectation
Good quality, mounts are firm. Loops are large enough and easy to hook through a helmet d ring. It looks like it will withstand any attempts to break it View detail
AdventureSports does not include
I bought a CRF 1000L for not thinking deeply, but AdventureSports was not able to be attached to Manual as Seat Cowl became Large.
Wait for a compatible product or universal product with Handlebaror CarrierorNumber or attach it to either
Well, I regret so I thought about a way to attach it, I fixed it between the legs of Tandem Footpeg Holder with reference to other cars, I got to use it, but the position is too low to be good.
At the same time, I purchased Honda's Cylinder and Body to make it a one-key conversion, we measured and processed it and brought it down.
View detail
Must-have item
V-strom650 (2018MODEL) It attached to.
Because Tandem Footpeg is also Black, it's like a sense of unity like an OEM.
If there is a Helmet lock, it is still useful after all.
Because the Screw Lock agent is used to remove Tandem Footpeg, it is better to have a solid tool.
View detail
Fits: YAMAHA YZF-R3 ABS, YAMAHA MT-03, YAMAHA MT-03 ABS, YAMAHA MT-25, YAMAHA MT-25 ABS, YAMAHA YZF-R25 ABS, YAMAHA YZF-R25 ABS, YAMAHA YZF-R25
As expected
I bought Motorcycle for the first time in about 20 years, but now the Motorcycle is
I was surprised that the Helmet holder was not even attached.
(Well ~ Actually I will tighten to RearSeat ? ? ? )
This product can be mounted as if it were an OEM without feeling uncomfortable
very good.
As a matter of fact, I felt it was unusual to use it.
I think that it is a familiar problem, so I think that I get used to it.
View detail