Reviews
Fits: BMW R1200GS, BMW R1200GS Premium Line, BMW R1200GS Rally Premium Line, BMW R1250GS HP Premium Line, BMW R1250GS Premium Line
If you don't mind the price...
I bought it to bulk up the height rather than the width of the seat.
The side stand makes it much better to lean when stopping.
I am satisfied with the quality of the product. Installation is easy with only 3 Bolts.
The drawback is its price, which I knew before I bought it.
Opinions differ as to whether one can afford to pay about 15,000 yen for Side Stand clogs.
View detail
Fits: BMW R1200GS Rally Premium Sport, BMW R1200GS-ADV, BMW R1200GS-ADV Premium Line, BMW R1250GS HP Premium Sports, BMW R1250GS-ADV HP Premium Line, BMW R1250GS-ADV Premium Line
This will keep you from getting stuck.
This is a standard product for BMW and the effect is outstanding. The quality is good and satisfactory. View detail
Purchased to improve body lean of my Racer 900GT
The OEM Side Stand for the Racer 900GT tilts too much, so when parked on an incline to the left, it tilts to the point where it might topple over.
Installation is easy, and after installation, it can be parked on a flat surface or on a slope to the Left without anxiety. However, it is better to consider where to park the car because it stands too much on the right inclined place.
This product has a height of the product itself and the bottom part is cut at an angle, considering when the product is parked, so it is stable on the ground. I had previously purchased a cheap Chinese one, but it was not thick enough and the bottom was flat, so the ground was unstable.
Japanese manufacturers are well thought out and the price is understandable.
View detail
Just the right amount of tilt.
In Japan, we have Left Side traffic, so the leaning is more large when we stop. Especially, when I stopped on the shoulder of the road while touring with a full load of luggage, I felt uneasy because it became a considerable lean. At such a time, I found this product and bought it. It is easy to install with 4 bolts.
The product is of high quality, high texture and chunky weight, and the tilt is just right, this eliminates any concerns. This product is more effective in loosening up the incline of the Motorcycle rather than increasing the footprint of the STAND. I haven't tried it on soft or sandy soil, so I don't know how effective it would be, but it would be a good idea to put some hard wood chips or large stones underneath just in case.
The price was high, but when I got the actual product, I was satisfied with the quality, and I am glad I bought it.
View detail
Secure parking.
When the Side Stand is engaged, the leaning of the vehicle body is reduced and the sense of stability is increased, and parking on uneven terrain has become safe. View detail
Camping touring with full load and expecting to be effective?
I have always felt that the car was leaning too much when stopping at the side stand, so I will be able to use this system in the future Extension to reduce tilt in case of a full load for camping touring installed
I was a little concerned about hanging STAND in places with bad footing and on the shoulder of the road, but as you can see in the photos, I was able to get it to work Balance seems to be a good choice when carrying Large luggage, as it is quite low leaning
It also increases the footprint of the STAND, so it can be used in places where the ground is soft, such as camping grounds You can also expect the STAND to be less likely to be plugged in
As expected of Earls Gear, it has a high quality feel to it
However, there is a part that doesn't fit perfectly with the STAND shape, and the fixed part is slightly floating There is
It seems to be perfectly fine for use, so I'm using it as is
Also, because of the reduced leaning, you have to raise the body of the car more than usual when applying STAND This should be considered a TradeOff
The price is quite high, so I was quite hesitant to buy it, but overall I am very satisfied with the product
View detail
Things are nice, but …
The thickness of the STAND grounding part and the concave part of Bracket are the same Some of the clasps don't fit, and the clasp floats & hellip;
I raised and lowered the STAND a few times to see if it was loose, and then used it a couple of times and it didn't come loose LargeI think it's sturdy, but if you're worried about it, you might want to get something else
View detail
Fits: BMW R1200GS, BMW R1200GS Premium Line, BMW R1200GS Rally Premium Line, BMW R1250GS HP Premium Line, BMW R1250GS Premium Line
I think it's a little too expensive
There are a lot of things that can increase the ground clearance of a STAND, but there aren't a lot of options that can increase the height of the STAND So I chose this one with an eye to price
The price is high because it's well built and high quality, but it's simply a Side Stand I'm not sure if I need this much for something that is just to bulk up the It's pretty heavy
You could make it a little more Reduced in Cost and built Reasonable User friendly
View detail
It is an excellent product.
Since it was heard that car height is high when R1200GS of Premium line, and Side Stand of NORMAL heard that the tilt is Large, install it at delivery.
It became wide, and it came to be able to be stopped securely without stopping even when stopping at a parking lot which is not paved.
Since installation is also very simple, we recommend it to all Riders on R1200 GS ride.
View detail
Fits: BMW F800S, BMW F800R, BMW F800ST, BMW F800S, BMW F800R, BMW F800ST
Although the precision of the work of the product is outstanding ...
It installed in F800ST.
The accuracy of the product's fabrication is wonderful.
On the other hand, the installation Side Stand was for casting? It was decided not to put on a pin but to scrape with File. Also, when paying STAND, the contact surface collapses because it hits Exhaust pipe. (This is also the product of Tulare TEC)
View detail
I am satisfied..
Product is also high texture and easy to install. The inclination when using Side Stand was also reduced, making it easier to cause bridging. It is slightly expensive, but it is a good item. View detail
geta
I selected it because the tilt is Large and the contact area is Small.
Because the thickness is Large, it is nice.
For other Manufacturers, the area becomes bigger,
I did not mention the height, I was anxious.
This is described properly, so you can rest assured.
View detail
[Webike Monitor] It attached to K1600GT. -- causing -- since it becomes easy and a crawler bearing area also increases, sense of security increases at the time of parking by a weight vehicle. Since it is the structure in which the products
[Webike Monitor] It attached to
K1600GT.
-- causing -- since it becomes easy and a crawler bearing area also increases, sense of security increases at the time of parking by a weight vehicle.
Since it is the structure in which the
products also became brave, it is safe.
The price of a difficulty is merely high.
View detail
[Webike Monitor] It attached to K1600GT. Although it is only 9-mm Up, it pulls and derrick up becomes easy. However, since K1600 does not lean so much from the beginning, it stands for a while and it feels it for feeling. At the time of S
[Webike Monitor] It attached to
K1600GT.
Although it is only 9-mm Up, it pulls and derrick up becomes easy.
However, since K1600 does not lean so much from the beginning, it stands for a while and it feels it for feeling.
At the time of STAND ON, cautions consider by necessity at the place.
View detail
[Webike Monitor] Although annoyed by the giant of 1600GTs after delivery of cars, after attaching this Bracket, the sense of stability at the time of parking increased to it to which the influence derrick up of the car body after parking beca
[Webike Monitor] Although annoyed by the giant of 1600GTs after
delivery of cars, after attaching this Bracket, the sense of stability at the time of parking increased to it to which the influence derrick up of the car body after
parking became very easy.
View detail
[Webbike Monitor] Since it was a huge form Motorcycle over 350kg, it pulled, and the preparations book product was comfortably purchased for derrick up. They are Earls-Gear products truly. Structure こみ and the high grade feeling covering d
[Webbike Monitor] Since it was a huge form Motorcycle over
350kg, it pulled, and the preparations book product was comfortably purchased for derrick up.
They are Earls-Gear products truly.
Structure こみ and the high grade feeling covering details are true.
since the car-body inclination at the time of
stop is suppressed -- expectation -- causing -- it became markedly easy.
Since a setting face product increases above all, sense of security is different also at the time of parking to the Asphalt, and the ground / gravel ground surface which became soft in summer.
Although it fixes to
attachment with six machine screws, it increases occasionally and a bundle is required.
View detail
Fits: BMW K1300S, BMW K1300R, BMW K1200S, BMW K1200R, BMW K1300S, BMW K1300R, BMW K1200S, BMW K1200R
Since the structure of attachment is good, it is attached exactly. -- also causing -- it became easy. Although it was HP Undercowl wearing vehicle, and not interfered at the time of storage, since the STAND was bounded and it contact
Since the structure of attachment is good, it is attached exactly.
-- also causing -- it became easy.
Although it was
HP Undercowl wearing vehicle, and not interfered at the time of storage, since the STAND was bounded and it contacted delicately with vigor at the time of a raising, the protection sheet was stretched by prevention of a Wound, ワレ, etc. just to make sure.
Although it is goods with easy
attachment, I thought whether the description etc. which indicated the details of goods could be attached.
View detail
Although it is only only 15 mm, the influence lifting from a stop time becomes uncanny comfort. And since the bearing surface is large, when a step is loose, a bury lump of a stand is eased and it is touch good.
Although it is only only 15 mm, the influence lifting from a stop time becomes uncanny comfort. And since the bearing surface is large, when a step is loose, a bury lump of a stand is eased and it is touch good. View detail