Reviews
Easy to install, but ???.
Installation is easy, and the design fits well with the car body without any discomfort. However, I think that the reflector should be included from the beginning since ACTIVE also manufactures a reflector. View detail
It'll be cool!
I installed it for its appearance!
I am satisfied with the style and the large size!
But the removal of the OEMBlinker is Large strange!
I warmed up the rubber part with a dryer and removed it by prying with a slotted screwdriver.
Note that Blinker is also thin and easily broken!
Reflector is sold separately!
View detail
It was not good.
The product is good, but the Instruction Manual is not beginner friendly.
Also, the screws in the "Included Parts:" were different from those in the Instruction Manual, and some were missing, making installation quite difficult.
View detail
Stylish finish
I have purchased Active's Fender Eliminator Kit for every car model so far, so I chose this one again.
Installation requires touching Blinker's Wiring, so if you want to install it yourself, you will need to have at least a minimal knowledge of this area.
The product itself is solid and I have no complaints about its accuracy.
The only thing I would say is that Reflector is a security component and should be included in the package.
View detail
When in doubt, this is the one. I'm glad I did.
[How is it used?
Duration:from about April 29, 2017 to as of September 10, 2023. Only the Blinker Bracket was removed at some Timing
Distance:approx. 68,197 km
Combination items:ACTIVE Reflector Kit Slim, POSH Faith Aluminum License Plate L Size, CF POSH SUS Number Plate Fixing Torx Taper Bolt & Nut Set
Was the one you received as per Image?
The product is exactly as pictured in the Image.
Was the installation difficult?
I think it was troublesome because I didn't know how to remove the cowl at all just after I switched to a new car. Furthermore, it is necessary to remove the seat and tail cowl, not the front part of the vehicle including the SIDE, which is usually removed for maintenance, so even now that I am used to it, I think it is still troublesome. Except for the removal of the cowl, the installation itself is not difficult.
How was your experience with it?
The installation of the Tandem seat naturally causes mud splashes to hit the Tandem seat, which is a cause for apology.
Since the most protruding part is the Tire or Tail cowl, the distance that can be retreated back is slightly increased for the same Space.
Since the Number is placed far forward, and the upper part of the Number is unguarded except for the bracket, the possibility of bending of the lower part of the Number due to a side bag or accidental human impact is increased.
Since all parts are RoseRose, OEM blinkers can be implanted in the beginning, and later, when blinkers are replaced, only the relevant parts can be targeted and removed, creating a clean look at all times.
Note that the Reflector, which must be used in conjunction with the Reflector, is not included in the package.
Probably sturdy, as it has not broken even with the aluminum plate, different bracket and blinker that are not included in the package.
The LED License Plate Lamp is also still reliable, as all four are still building materials.
The vehicle has been inspected as is, so it probably passed. (Vehicle purchased before the revision of the standards)
[Included Parts:were they on?
As shown in the product image.
[Was there anything that disappointed you?
I guess there isn't because there is nothing to be concerned about.
Conformity of License Plate with revised standards
Before revision Being able to read." It is not clear whether the safety standard is met for vehicles with clearly defined angles after the revision, since it has been in use since the time of the
This is a standard item that can be found at most Large Mortgage Motorcycle stores, and many riders have probably used it. It is a recommended product that can stand up to the mud and the mileage.
Since the revised criteria are unknown, the risk of BonusPoints being added when caught in some cases should be considered.
View detail
Fits: KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2SX SE
I would like to see an effort to eliminate Option products.
Fender Eliminator had been using Active, so I bought it at Timing, where I had just finished inspecting the car.
It is unfortunate that the price became expensive because we purchased two Option Blinker and Bracket at the same time because we did not want Pannier to be out of the market. I think the product is insufficiently considered in this respect.
Also, although the simultaneous tightening of the License Plate Bracket and the License Plate can reduce the number of parts, it is disappointing that there is no texture.
The installation was the worst because I have a Bracket for GIVITop case, but I think it would be easy to install under normal circumstances.
If you do not use Pannier, which is also an Option consideration, I can recommend it.
View detail
Active Fender Eliminator Kit
Fender Eliminator Kit made by Active.
The Rear area is now cleaner and Parenthesis better.
View detail
Active Fender Eliminator Kit
Fender Eliminator Kit made by Active.
The Rear area is now cleaner and Parenthesis better.
https://www.shiba-vilogger01.com/article/471106849.html
View detail
Cool
I bought it because I liked the way it looked.
I like the look of the Parenthesis as expected. I think the luggage space is a little narrower.
View detail
It is quite Large strange.
I have not used any parts from Normal fender, so I use Other Brand Product for the blinker, and I have purchased additional OEM sub harnesses.
First of all, it is difficult to remove the Cowl, because the claw is so tight that you have to pull it in the right direction to remove it.
It is impossible to install the Bolt by one side at a time according to the instruction manual.:The two pieces of equipment must be installed at the same time, but please be careful not to drop the color at that time.
This is something that will not be known until it is installed, but the hole for the Wiring on the body side and the Wiring are exposed to water, so they will get wet. If the wiring is long enough, it may be possible to cut the Bullet Terminal of the License Plate Light and connect it directly.
It was an amateur job, and I had to install and remove the ardacoder, but the Rear area was refreshed and the parenthesis was improved.
View detail
I think it looks good.
I bought it and installed it because I want to make Rear Refreshing.
The Instruction Manual said the installation time was 40 minutes, but it took 1 hour and 20 minutes.
It came with something like Sponge to fill the holes, but
I didn't know where to put it, so I didn't.
Holes were filled with Tape.
If you are someone who usually does maintenance and Custom yourself, you can do it on time.
Please refer to some people who have raised the installation on You Tube, etc.
View detail
ACTIVE Active Fender Eliminator Kit installed
I chose this one because I registered my Z125pro as a light motorcycle.
I had a hard time inserting the Blinker, although the Rubber may be hard in winter.
If you insert it from the thick side of the oval while clamping it in a vise and pushing it in with a slotted screwdriver
I'm in, the LED License Plate Light is also Parenthesis good.
View detail
Slightly Refreshing
CBR600RR (PC40) Purchased and installed for
Installation with some of the OEM Parts is
It was good that it was not that difficult.
Originally, OEMFender was not Large enough.
There is no significant difference, but there is a slight difference in the Rear.
I felt like I was Refreshing.
View detail
Fits: KAWASAKI NINJA250, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI NINJA400
Strength is solid.
Cheap Fender Eliminator Kit may break due to vibration, but this product is strong and will not break due to vibration.
The price is a bit on the high side, but I am satisfied with the good angle of the License Plate and the luggage Hook.
View detail
Products that accumulate Stress.
I have installed many Fender Eliminator Kits, including Chinese ones, but this product feels stressful to install.
The Adapter is inserted between the Seat frame and Body, but since it is a poorly Exactly hole, if it floats while you insert it and install the main issue, you will not be able to correct the Gap when temporarily fixing it, and you will end up using thin Double-sided Tape to glue it to the Frame side.
If I am told to prepare at least double-sided tape, that's the end of the story, but I would like the instruction manual to mention at least Smooth for installation if double-sided tape is available.
More time is wasted thinking.
It was also discovered at the temporary assembly stage that the wiring of the blinker hit the sharp corner of the BodyBracket, and we had to reassemble from scratch after putting the protective coating tube over the wiring. If we assemble it as it is, there is a possibility of wire breakage.
The addition of the coated tube made the wiring holes too tight, and the installation process was stressful and very tiring.
For this kind of content, the previous Made by HURRICANE kit for the same type of vehicle was about half the price and very good with no stress in the installation.
I was expecting a MAJOR Active product and relatively expensive, but I was very disappointed.
View detail
GSX-R750 Fender Eliminator
It is easy to work with because you just remove and attach.
LEDs are also Coupler, so you can go Couplet-on without wiring processing.
View detail
I recommend this product for its good cost performance and design, even though there are many similar products!
At first glance, similar products that appear to be exactly the same? However, if you compare the photos carefully, you will notice that the design is slightly different. I chose this product because I thought the distance between the Tail lamp, License Plate Light, and License Plate was the most compact and parenthesis. I was worried that the price would be a little lower than the other products, but I was wrong. I would recommend this product to everyone! View detail
Neat rear fender
To remove the existing genuine fender and look sleek, we recommend a fenderless kit. The product finish is also excellent. View detail
feeling refreshed
[How is it used?
I used this to remove the characteristic Fender of Center Up
Was the one you received as per Image?
It turned out exactly as shown in the picture.
The cleaner look makes it more photogenic and easier to photograph.
Was the installation difficult?
Compared to other car models, there were more parts to be removed, so I felt it was more labor intensive.
I thought it would not be too difficult because I had some idea of what I was going to do beforehand, such as with the video Site, and did the work.
How was your experience with it?
Since the Fender will be gone, there may be more winding of the Rear than before.
(I haven't experienced it yet)
[Included Parts:were they on?
There was a set of parts to be installed on the car and a simple instruction manual for installation.
[Was there anything that disappointed you?
From the back, it looks slim and good, but from the side, it looks a bit more.
Maybe it was the Center UpLayout part that made me feel that way, unlike the current style of SS.
Instruction Manual is included in the package, but I think it would be easier for first-time users to imagine the work and proceed after watching a video or something.
View detail
Fits: BMW S1000R, BMW S1000RR, BMW S1000RR, BMW S1000RR
It is solid and has a good texture.
At first, I had installed CHINA's cheap Fender Eliminator Kit, but the hole to install the blinker was too large and the hole was noticeable even after installing the blinker (you could see the other side), and the LED License Plate Light was too large and looked cheap. I replaced it with this one because I didn't like the cheap-looking feeling of the Large License Plate and the Clearance on the side of the car body.
Installation is not particularly difficult. First, pull out the Coupler, which integrates the Blinker and License Plate Light wiring, then remove the OEM Rear Fender, and you are halfway through the installation process.
All that is left to do is to install the equipment in accordance with the Instruction Manual, which is not difficult at all, so I would like to encourage custom beginners to give it a try.
However, the instruction manual included in the package is white-black and difficult to understand, so it is better to use the PDF version of the instruction manual, which can be downloaded in color by accessing the Active homepage from your smartphone.
I wish they would have included a color printed Instruction Manual from the beginning... but I am thankful that a color version is available. I think this is a good measure to lower the Hurdle of installation.
It is an aluminum Fender Eliminator and costs close to 20,000 yen, but the quality is good because of its high price.
I especially like the elegant way the License Plate Light shines, where the light source is not fully visible.
However, I personally prefer the License Plate to be a little closer to the body of the vehicle, and the License Plate should be laid down to the limit, although it is legally regulated. Also, it would have been better if there was some kind of improvement to plug the holes where the Blinker and License Plate Light wirings are pulled into the body of the car. But it is a Large Merit that can pass the inspection as it is.
*Reflector is not included and must be purchased separately.
The S1000RR after 2015 seems to have a slightly different image than the Wiring color in the instruction manual.
Also, when I disconnected and connected the OEM License Plate Light Wiring to power the LED License Plate Lamp that was included in the CHINA Fender Eliminator Kit, it came on at first but soon stopped working.
Then I connected the License Plate Light of this product to the OEM License Plate LightWiring and it did not light up. I had no choice but to branch off from the ETC power supply and Wiring.
View detail