Reviews
Compared to a certain Other Brand Product, Snap and fit together.
I replaced a certain Other Brand Product with this product.
As shown in the Title, the clutch is attached to the shaft with little play, so it can be installed with a snap. Therefore, the clutch operation has become more responsive, and operability has been improved.
The price is a little high, but since it is also sold as a PedalTipSingle Item, it will be around for a long time to come.
The quality of the product is very good, and I thought it was a good product with good flexibility in adjusting the angle of the pedal.
View detail
Fits: HONDA CRF250M, HONDA CRF300L, HONDA CR80R/RII, HONDA CR85R/RII, HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF300RALLY
Strength.
I often rub my bike on forest roads, and my pedal gets squishy every time.
I bought it as a countermeasure for that. My bike is gray in color, so I'm a little uncomfortable with the Red pedal.
I'm not sure if that's a good thing or not.
I'm not that particular about the black one, though.
It's all scratched up anyway.
I'm hoping it will be strong enough.
View detail
Fits: SUZUKI 250SB, KAWASAKI KLX250, KAWASAKI KLX300R, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker
Premium shift lever!
Good aluminium material and friendly design for enduro purpose! Easy to changing gear because of the revolver features. Easy to install. Very best bang for the buck! Fast shipping to Malaysia. Very recommended! View detail
Fits: HONDA CRF250M, HONDA CRF300L, HONDA CR80R/RII, HONDA CR85R/RII, HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF300RALLY
zeta Revolver Shift Lever
I trust the zeta brand very much. As expected, it's the best! It was easy to install when I saw the manual. Thank you very much. View detail
Fits: HONDA CRF250M, HONDA CRF300L, HONDA CR80R/RII, HONDA CR85R/RII, HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF300RALLY
I like the ability to fine-tune the height.
I bought a new pair of Boots, and due to the difference in the thickness of the Boots, I was concerned about the height position of the Change Pedal with the OEM Pedal, so I purchased this product that allows for several levels of fine adjustment of height.
Since the mounting bolt is from the bottom, the instruction manual instructs to apply an anti-loosening agent. I replaced the bolt with a longer bolt, and although the mounting from the bottom is the same, I used a spring washer and nut to prevent the bolt from coming off. Of course, I also applied anti-looseness agent.
It looks beautiful and I am glad I replaced it.
View detail
Fits: SUZUKI 250SB, KAWASAKI KLX250, KAWASAKI KLX300R, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker
GEARShift
I like the color Parenthesis! I like it very much. I am happy with my purchase. Thank you. View detail
Fits: HONDA CRF250M, HONDA CRF300L, HONDA CR80R/RII, HONDA CR85R/RII, HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF300RALLY
Dress-up & Functionality Large
You are all standard custom parts, aren't you? (LOL)
It is good as dress-up parts, and the Revolver is a great way to fine-tune the height and position.
Off-road boots make it difficult to SHIFT UP & Down, and this is always a point that needs to be adjusted.
The Large size does not change much with these parts, but only a minor adjustment.
Therefore, in my case, I use GEARSerration to move the position up and fine-tune it with this Parts.
In the case of off-road motorcycles, standing and sitting are a necessity to get just the right GEAR position.
View detail
Fits: YAMAHA XG250 TRICKER, YAMAHA XT250X, YAMAHA SEROW250
massive
The position of the PunchMark on the Shift arm was too high even if I adjusted the ROD as low as possible, so I shifted it by 2 mountains and adjusted the ROD to the best position. The function is the same as NORMAL, so I think it is more fashionable. View detail
Fits: HONDA CRF250M, HONDA CRF300L, HONDA CR80R/RII, HONDA CR85R/RII, HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF300RALLY
perfectly normal
Bonsai after a long time because NORMAL Pedal has been rattled for Large.
The absolute strength may be high, but serration of the change shaft seems to be extra painful.
The Shift operation feel in Standing remains the same when fine adjustments have been made.
View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ250X
Shift Pedal
GizaGiza synthesis on the part where the clutch is attached looks like a bad lick! View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ250X
be extremely thorough, focusing on even the finest of details
I guess it depends on off-road boots and the size of the foot, but I replaced it with NORMAL because it was hard to operate in Standing.
After adjusting it several times while riding, I was able to operate it Smoothly and was satisfied with Large.
View detail
Fits: HONDA CRF250M, HONDA CRF300L, HONDA CR80R/RII, HONDA CR85R/RII, HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF300RALLY
Improvement of appearance
Parenthesis looks great - the shift position can be fine-tuned by rotating the tip... It is easy to install. View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ250X
Merit is Large size with your choice of Position.
I was not dissatisfied with the OEM, but I bought it because of the 4-position option.
Touch is also very good, and I think this Merit is Large because it is an important part for a 2-stroke vehicle like YZ125 that needs to be changed frequently.
The Bolt position is also better than the OEM position, which clamps from the bottom and is less likely to fall out.
View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ250X
In the targeted Position,,
The pedal position of the OEM YZ125X is a little low, but if the serration is moved up one notch, it is too high.
The result, as you can see in the picture, is the same as the OEM, or even lower, even with the tip adjustment turned up.
Then I tried to lower the tip adjustment while shifting the mounting position by one, but it was a little too high.
I tried it on a run, but I felt it was a little too high and difficult for me, although I guess it depends on whether you prefer to lift the SHIFT UP only by the ankle or by the whole foot.
A small difference can affect the operation quite a bit.
In the end, the position of the Serration was almost always determined by the position of the tip, and the tip adjustment could not be positioned to aim in the middle of the Serration.
The photo shows a ruler placed on the footpeg, I hope you can use it as a reference for the height.
If the height is right, it would look good and be good, I think.
Incidentally, the bolt at the tip was replaced with a good one just to be safe, and Screw lock was applied before installation.
View detail
Fits: HONDA CRF250M, HONDA CRF300L, HONDA CR80R/RII, HONDA CR85R/RII, HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF300RALLY
Beautiful.
Replacement from OEM Product.
Consider Forged Shift Lever and Revolver Shift Lever from the same ZETA.
If the difference is only about $1,500,
It's not a part that needs to be replaced that often, so it should be a good one!
You can choose the color, and even though we didn't do much, the parts are full of modifications!
Replacement is easy. Remove the Front ChainCover and pull out the Bolt with an 8mm wrench.
If it doesn't come off, give it a bit of a bang with a plastic hammer.
The problem is that OEM is Bolt mounted from the top and ZETA is Bolt mounted from the bottom.
I'm afraid I'll drop it if it gets loose. (^^;)
TipMount is shipped in a loosely assembled state,
Be sure to arrange for a screw lock agent to be applied at the same time before assembly.
View detail
Fits: HONDA CRF1100L Africa Twin Adventure Sports, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin
Shift change wearing off-road boots
Shift change in off-road boots was tough, so I replaced it with zeta's RevolverShift this time. However, I need 20mm more.
〜I wanted to raise it ~30mm, so I am going to order two different shorter length shafts from Dealer and try them out.
View detail
Fits: HONDA CRF250M, HONDA CRF300L, HONDA CR80R/RII, HONDA CR85R/RII, HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF300RALLY
Reliable Brand
The installation was flawless, as I would expect from such an expensive product.
It looks great and Parenthesis is great!
It would be nice to be able to change the Change section somewhat and change it to my preferred position.
I bought it because I didn't care about the performance and wanted to have it with ZETA…lol
View detail
Fits: YAMAHA XG250 TRICKER, YAMAHA XT250X, YAMAHA SEROW250
Best solution for OffBoots!
It's a little expensive, but it's ZETA, the trusty ZETA.
I am highly satisfied with the detailed workmanship.
I heard that if you don't use Screw lock, it will come off, so I did it right!
With NORMAL, it was difficult to operate even after making adjustments, but this is good because it allows me to make various settings.
I will try to come up with a more detailed Setting in the future.
View detail
Fits: HONDA CRF150R, KAWASAKI KLX230SM, KAWASAKI KLX230S, KAWASAKI KLX230
Used for CRF150r2
It is good to be able to change the position as desired. View detail
Fits: HONDA CRF150R, KAWASAKI KLX230SM, KAWASAKI KLX230S, KAWASAKI KLX230
Used in CRF150r2
I bought this pedal because I thought it would be a little better than the full size Motocrosser, because the Change Pedal is a little closer to the CRF150r2. I will change it to LongTip for Replacement and will get it. View detail