Reviews
Grip force is increased and can be felt even in city driving.
[How is it used?
I bought this seat as a for re-covering because the normal seat for WR250R that I bought used was not in good condition.
The vehicle itself was also purchased used, but the Seat is a SPIRAL Complete Seat, the same as the Seat cover I purchased this time. With Stages Seat I found it difficult to use, so I bought a second-hand Normal seat.
I had already heard that someone I know uses this product and had heard reviews that the grip of the Seat Cover is good and easy to use, so I had no hesitation in purchasing it.
How did you like it?
As Mr. Manufacturer claims.
The original non-slip material is used, which is more grippy and durable than the existing Seat cover in a larger width.
Different materials are used for the top and sides of the cover, allowing for excellent machine control. As it says, it grips firmly when riding and improves the hold of the vehicle body.
My personal driving skills are low and I only play with low specifications for walking on forest roads and playing in the mountains, but the Seat's grippy feel is dependable, and I expect the Seat fabric is thicker and more durable than the OEMSeat Cover.
How did it compare to other products?
I can only make subtle comments because the only comparison is SPIRAL's with Stages Complete Seat, which was replaced in a short period of time, and the Normal Seat, which has a hardened Seat Cover. The Seat Cover itself is soft and elastic, so it is very good for a few hours of riding without getting tired. (Seat shape is NORMAL, so the surface of the buttocks will be sore after a long run.) 。
In my personal opinion. Seat CoverSingle Body price is a little high?" I think it's a good idea, but I'm not sure if this performance is enough to convince me. I think it is acceptable for this kind of performance.
[Points to note]
The seat cover itself is sewn three-dimensionally, so it is easy to put up, but the reverse side of the seat base of the WR has a rather complicated shape, so there are many parts where it is difficult to put up the tucker.
As I mentioned above, when reupholstered with STD Shape's Seat, the Siri will be sore after a long ride! (Due to the nature of OEMSeat) If you want to avoid this, you can make the seat wider or install shock-absorbing materials.
Purchasing a Complete Seat may be an effective way to do this.
Other items that would be helpful
The deciding factor in the purchase
Performance of the Seat fabric itself.
The Large was inspired by an acquaintance of mine who was using the same product.
[How is it used?
We use it for mountain play and Flat forest walks.
It is a little too heavy for me, so I don't use it for difficult Attacks, but I really enjoy Flat forest roads.
【Included Parts:presence or absence】.
SeatBody and a simplified Instruction Manual are included.
[ITEMS TO BUY TOGETHER
Tucker& needle with short legs to stop Seat if this is your first time reupholstering. (core? ball?) If you want to make it waterproof, use Vinyl sheet. (Garbage bags are also acceptable) The Coking agent may not be necessary since the sewing is done by Crimp Type.
Opinions and requests to Manufacturer.
I think it would be great if the slightly older Minor car models etc. could also be expanded into a lineup.
View detail
Fits: YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ125, YAMAHA YZ250X
The best Grip!
Great butt hooking!
It's a lazy wadachi climb, so you can rest your arms.
It all leads to the Traction of the Rear tire ??
Recommendation
View detail
Seat GripUp
Motive for purchasing
As the OEMSeat was torn, I thought if I was going to replace it anyway, I would use Other Brand Select this product from Product I decided to try it out by looking at the images and the description of the material, which seems to have a high grip I did
About the product
If you don't have confidence in the reupholstery process, you should ask the Shop for help
I was able to borrow a Tucker to reupholster the seat, so I did it myself I saw it I managed to spend an hour or so with the help of a buddy who has done the re-upholstery many times The reupholstery was done I thought it was a waste to reupholster it as it was because I took off Seat I decided to stock a waterproof cover together to protect the inside from water
It's not exclusive to this product, but it takes a certain amount of time to replace Seat with Beauty I felt I needed experience and a hang, and if the Seat cover itself is inexpensive and fails, I'll buy it again If you can, you can try it yourself, but this product isn't that cheap, so you'll have to reupholster it If you're not confident, it's less expensive later on if you ask the Shop to do it honestly
Non-slip surface finish is excellent
When I had a normal seat, the seat slipped on the Seat when it was full breaking But after I replaced it with this Seat, I can support my body firmly Thanks to the non-slip surface, the bottom half of my body is held firmly in place I personally like it better than the design of the OEMSeat It is
How is this price for CoverSingle Body?
If it's SeatBody, but this product is only available as a Seat Cover So, I think that the selling price is about 9,000 yen, a little bit of bad cosmetic You may not have to replace it with this Seat if you do not have particular care
View detail
A little bit pricey, but a good product
This is my first Seat Replacement
I bought a Tucker from Home Center and they said it was not waterproof Put it in a plastic bag and temporarily fix the top and bottom before placing it in Quantity:Pair (for Left and Right) And then I packed it in
Draping made it easy to reupholster for the first time!
With the Protector, it is easy to front up on cars that are off, which is difficult to grip the knee became
I was unsure about the OEM BlackSeat, but this one was good because of its grip
View detail
Mounting on a friend's WR 250 R
A friend asked me to purchase & install the proxy.
I used it also for my CRF 250L
quality ? Texture confirmed.
Logo's Rubber Edge was Blue. Because CRF was Red ...
Maybe the color is different for each Manufacturer?
Regarding installation, I have been going through many times and have been experienced
Although I'd like to say that there is no problem ...
It is not a problem of goods, the undulations of the back of Seat of WR are intense
I could not stop it well with Tucker on hand
View detail
It got easier to ride
I tried Seat stretch for the first time.
Because it does not fit properly with Daiso Tucker,
I pushed it in Driver and stopped it.
As Seat cover is exclusively for the car type, so it is solidly cut
It was easy, because the tip of Tank side was also Draping.
The impression which got on grips more moderately than the OEM, but SIDE
OEM same etc. Because it does not disturb the operation with ease.
I thought about OEM's BlackSeat, but in this case
It was a correct answer..
There is no impression, but it is a good item.
Those who are considering it is recommended.
View detail
Slip stop effect is absolutely Large.
I changed from the epidermis of NORMAL.
First of all it looks like a textured feeling on the surface, a luxurious feeling came out.
It's good to make, it's finished close to OEM Product.
The effect of anti-slip is absolutely Large, when NORMAL, it was fixed that Gap before Breaking.
I feel that the pain of the butt has become a little.
I will leave the PRO to the reclamation.
View detail