Reviews
Mounting is not Kang Tan.
The base paper is very difficult to peel off, and the adhesive on the Body side almost peels off if it is poorly untangled.
Also, the edges are peeled off at first, and then gradually turned up to a large size and pasted on, which also requires a lot of strength.
The feel is good, except for the sticking.
View detail
Used for VTR1000SP2
The knee grip is also very comfortable and I use it every time I buy a motorcycle. View detail
Necessities
STOMPGRIP makes it easy to drive, easy to get a good knee grip, and stable. Very difficult to install and quantity:Pair (for Left and Right) The result was a little off. View detail
Items required for Sports Motorcycles
outline
It is a pad for Knee grip to put on Tanketc. of Motorcycle.
Reason for purchase
When I was looking for a Pad which can protect Tank and Knee grip stably because Tank rubs by Knee grip when I ride Motorcycle, I knew that Stomp Grip is used in Race and various places, so I bought it.
I bought this for my ZX-10R 2021 model, but there was no compatible model, so I bought this one which seems to fit the best.
Appearance etc.
StompGripBodyQuantity:1 Set of 4pcs.、StickerQuantity:1pc. is included. Sticker is like an extra.
On the back of the packaging, the compatible MODEL is listed as ZX10R 11-20 years MODEL.Material:Since it is a Rubber product, the date of manufacture is also listed. In addition, it is written in English version, and it is stated that the installation method can be seen in the video at StompGrip.com.
Mounting method
Wash the area around the tank with a mild detergent and let it dry. The position of the tank will be decided by placing the tank on the motorcycle. As you can see, the position of the Tank side of the ZX-10R 2021 MODEL does not match the Exactly, but when you put it on, you will not feel any discomfort at all.
It's a good idea to check where your knees are in the riding position.
Warm up Stomp Grip beforehand with Dryer, and paste it. For the first pasting, put the Stomp Grip on the pasting position and decide the whole pasting position firmly, then put the release paper a little. (several centimeters) I think it works well if you only peel and stick.
Press firmly with your fingers to release the air bubbles. Peel off the release paper a little and repeat this process. Repeat this process, making sure that the rear-most position of the pasting position is not misaligned.
Also, since it's Rubber, you can modify the direction of the sticking while sticking it, so I think it's better not to peel it off and stick it again.
Even after you put it on, air bubbles may appear after a few hours. At that time, press it with your finger to pull out the air bubbles and it will stick firmly.
The above method is somewhat different from the official one, so please refer to the official video.
Impression used
The knee grip is stable because it doesn't slip, and I feel that the burden has decreased because I can ride without using unnecessary force. Some products have small or large protrusions on the grip, but this one has medium protrusions called VOLCANO, but it is just right.
Improvements
Garbage was adhered to the part of Double-sided Tape, but I used it as it was because I noticed it in the middle of pasting and I couldn't remove it because of the adhesive part.
View detail
whole [Color] It's not Clear.
I used it on my 2021 zx6r.
I bought this because I believed the Review that said it was for the 2009−2015 model but it worked fine on the 2021 MODEL.
[Color] I ordered Clear, but the Frame part had Black.
If you think about it, all the frame parts are black except for the white color of my 2021 model, so I'm sure it's not a problem for others at all, but it's not a cheap item and I wish it had been clearly stated.
View detail
To prevent slipping when driving or breaking
What made you decide to buy?
For preventing scratches on the ZX-6R tank and for preventing slippage when driving or breaking!
How was your experience with it?
I bought this Volcano Type, and the explanation says that it is suitable from Winding to street riding. When I actually used it, I thought... If I tried to grip my knee after sticking the Tracktion Pad to the Tank on ZX-6R... I actually became around the bottom than the position where I stuck the Tracktion Pad (sweat). I think that it is good to confirm the place where it hits when I do the knee grip because there is a small size pad attached.
About the installation ... It is Clear type that I bought. In StompGrill Preview, there was a recommendation for Black type because the air bubbles are noticeable due to the lack of air venting at the time of installation. After all, I thought that it was uncomfortable to block the beautiful Kawasaki Lime color, and bought Clear type. I was able to study the method of sticking beautifully on YouTube before sticking Stomp Grip and to enforce it safely and beautifully without the remainder of Air. It is the thing that I take time slowly, and stick it while pulling out Air while tapping with a finger from the edge. Black seems to be recommended for the person who is uneasy as there is in the Review of other people.
View detail
Fits: APRILIA RSV4, APRILIA TUONO V4R 09-14, APRILIA TUONO V4R 09-14
A must for Sports riding?
The STOMP GRIPTank Pad is popular with sports riding riders.
RSV4 RF has a graphic of the letter up to the side of Tank, so the letter is visible. [Color] I bought Clear
Recommendation Point
When doing sports riding on the Circuit etc., the thigh is caught in the Tank just right by Hang Off, and it becomes easy to hold the posture.
By lightly gripping the knee when fully accelerating in a straight line at the circuit, the body is not taken backwards, so even with the violent acceleration of a liter SS, full acceleration is possible with stability.
? Black and [Color] You can choose Clear.
Black is easy to install because you can't tell if there are air bubbles in it 。 [Color] Clear is good when you don't want to hide the graphic, but the installation is Large strange.
The adhesive seal is quite strong and will not come off if you degrease it well and stick it.
Disappointment Point
・ [Color] If you choose Clear, it's quite a hassle because there are quite a few air bubbles during installation.
Because the adhesive seal is very strong, it is basically impossible to re-tension. 。 When I tried to remove the seal that I put on another machine before, the seal was left on the body and only the STOMP GRIP came off. 。 Even if you can peel it off well, it might come off from the edge because the adhesive strength decreases.
That's all, I highly recommend it to any rider who does sports riding!
View detail
Without it.
Repeat Purchase
You can run without it, but once you use it, you'll need it.
It slips and the Form is not set.
A little hang is needed in terms of installation work.
Remove the base paper a little at a time. While scraping, make sure there are no air bubbles.
You need to put up A little each A little each.
If you apply it patiently, it will not contain any air bubbles and will be beautifully finished.
I think it's better if the temperature is around 20 degrees Celsius.
I think it is hard and difficult to stick when the temperature is low.
I`ve omitted the part about putting it on the Frame.
View detail
Expensive but good product
'19 I put it on the ZX-6R
I think it's partly because of the riding posture, but before I put it up, the tank slipped a lot
I had to do a knee grip with more force than necessary, which resulted in a wobbly leg and knee pain after the ride It was awful
When I put this product on the tank, the feeling of hold increased and it doesn't slide down beautifully!
It made the ride a lot of fun
I always ride with Jeans and I've never felt any particular warts and bruises
The strongest negative points are as follows
Expensive for the parts
I don't like the design (warts and all)
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750
Royal road
Used in GSX-R600 K9.
These Pads are various in each Manufacturer
Large body [Color] Although it was Clear, there were many places difficult to match with the car body
Manufacturer here also has a setting for Black
It was Don Pissha for my own car that had been hardened with almost black.
Usability is ? ? ? Well, I guess this is something like.
Since we also incorporated Rear Sets almost at the same time
Is it the benefit of Position change
I did not know whether it was the benefit of Pad.
However, "As it is" There is a sense of Hold in
It goes without saying that it became easier to run.
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750
Also necessary for town riding
Excellent product that will confirm the importance of Knee grip again.
Those who ride with thin Pants may feel a bit painful, but I think that when wearing a Motorcycle should wear something of such a thickness that it does not hurt in the first place.
When I was wearing Racing suit and Leather pants, I felt that the sense of unity with the vehicle increased further.
Even when pasting, it is a wonderful point that it is easier to position because the soft material is used.
Stain included in the attached Sticker, Body's Film is hard to peel off because it breaks.
View detail
Is this OK?
Looking at Impre of this site, the dish that I was very interested in, "Stomp Grip" I bought.
Although I bought a car model exclusive item, Carbon Tank Pads has already been installed in my Motorcycle, so first cut off the useless part. Even Scissors got cut cleanly.
Paste after cutting. Carefully paste so that air bubbles do not enter little by little from the edge. The pasting work is Quantity : Pair (for Left and Right) In about 15 minutes.
When using it ,,, This is good!
Knee grip is now easier. Strange power will not enter the shoulders and arms. Long riding became tiring as well.
I think that it is a pretty good item for Motorcycle taking a forward leaning posture.
I wish I had bought it sooner..
View detail
Knee grip to High grip!
【What made you decide the purchase?】 Seat of Ninja 250 SL was made to slide forward in front and I tried to fix my waist with Knee grip, because I slipped, I wanted something to ensure Knee grip and similar to zank of zx - 10 r By saying that there is a place saying that it can be attached by Small processing.
【How was it actually used?】 It is good. You can prevent the Knee grip from feeling a sense of stability and slipping. Muscle pain in my thigh internal gluteus muscle was relieved. In addition, although 3 M glue is every time, it has a distinctive smell like sour smell or hospital smell. I was worried about Clear and Black, but Tank Cover was black anyway, Black thought that dust would stand out and made it Clear.
【Was it difficult to install? (Hard parts case)】 I degreased the place to paste with PartsCleaner, paste from the center, I feel I will push out bubbles to the edge to the edge. However, because the adhesive strength is Large, it will not be possible to fix it once it sticks a bit!
【Please tell me the point of installation and hang (in the case of Hard parts)】 After all, since it is a diversion of ZX - 10R, there is some need to cut out. Especially the slightly pointed portion cuts the point a little bit round as it seems that it will peel off as it comes to the part where Tank Cover just hangs. Also, since I'm a shit, since my knees do not come in the real Tank part, it was OK to paste it on the part of Tank Cover.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
[Is there anything I was disappointed about?] Because it is made in United States, many of things like paper Waste stick to the surface of Pad and it was troublesome.
【Hope for Manufacturer - Please tell me if there are any improvement points】 I think I should have had for Ninja 250SL.
【Have you compared items?】 None.
[Others] All Instruction Manuals are English Version, "Stomp Grip" Sticker is attached, but printing was laughable at the moyamoya.
View detail
Fits: SUZUKI SV1000, BMW R1200GS, SUZUKI SV650 03-09
It is impossible for Stomp without Grip
Since Clear which I used for 2 years became soiled, it was replaced.
I bought Clear for GSX 1300 R HAYABUSA and cut and pasted the part overlapping with Carbon Tank Cover, but in particular the dirt on the border around is conspicuous. The dirt that entered the border can not be removed by blending with the adhesive. Clear so it stands out more.
That's why I did not need to Cut Others for Vehicle I tried Small things, dare to Black. This will make the dirt inconspicuous.
View detail
Required to hold the body
Every time I change trains, I use it regularly, but it is better to have had public roads as well.
It is very easy to hold your body during Brake.
However, we recommend leather bread because it is painful in a jeans or the like.
View detail