Reviews
Fits: HONDA CBR1000RR, HONDA CBR600RR
Appearance and operability
[How is it used?
City Riding ~Touring
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Instruction manuals are also available and are extremely easy to follow.
How was your experience with it?
I am up to my ring finger when I use it, so Short is just fine and easy to maneuver.
[Included Parts:were they on?
I don't think there are any missing items.
[Was there anything that disappointed you?
It is not so much a disappointment, but even if you choose the matte type, the Attachment part will be glossy. This may bother some people.
Although not specifically mentioned in the Instruction Manual, it is recommended that grease be applied to areas where the gold species rub against each other.
Also, the handlebar section is subject to strong vibration, so a screw lock agent was used just in case.
Note that when the Adjuster is expanded to the maximum Large, some interference will occur. 5 out of 6 levels are Large sturdy.
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR
Lever replacement for CBR600RR
[How is it used?
City Riding ~Touring
Was the installation difficult?
Instruction manuals are also available and are extremely easy to follow.
How was your experience with it?
I am up to my ring finger when I use it, so Short is just fine and easy to use.
[Was there anything that disappointed you?
It is not so much a disappointment, but even if the Lever is matted, the Attachment section will be glossy. It may bother some people.
I was not sure whether to choose Blue or Silver for the Adjuster, but I chose Silver because of its harmony with the Bolts around the Handlebar. Personally, I think it was the right choice.
There are six levels of adjustment, but please note that fully locking the handlebar to the furthest position will cause partial interference with the vehicle body.
As a note on installation, I don't think the Instruction Manual mentions it, but it is recommended to apply grease to the areas where the gold elements rub against each other.
Since there is vibration around the handlebar, we also used a screw lock agent to prevent the screws from loosening.
View detail
Fantastic
Ordered these for my Suzuki GSX-1400, the fit is fantastic and great feel as well. Great quality and great adjustments as well. View detail
Fits: HONDA CB650F, HONDA CBR650F, HONDA CBR650R, HONDA CB650R
Eukanaya Lever Exchange
First of all, the appearance can be changed to the color of your choice with Fashion.
I was able to differentiate myself from others.
The feel is better than OEM and it fits my hand very well.
You can ride your Motorcycle with peace of mind.
I was able to replace it easily by myself and I'm glad I bought it.
View detail
The omnipresent, fading, unfading monster
[How is it used?
Period:circa April 29, 2017 - Brake Side:late July 2021; Clutch Side:in continuous use as of September 10, 2023.
Distance:Clutch Side:approx. 68,197 km
Scenes:Large part is touring, spring, summer, fall and winter, by the sea and in the mountains. Including some circuits.
Was the one you received as per Image?
The product is as seen in the manufacturer's image and as seen in most of the large products in motorcycle supply stores.
Unlike OEM levers, there is a bolt that connects the Attachment and the lever, and unlike OEM levers, not everything is in one pc. as shown in the image.
Was the installation difficult?
All are Quantity for the car models.:It comes in a set and is easy to replace the OEM lever, although there is some work to be done to remove the ClutchWire and grease up the bolt.
In the case of partial damage, the actual store would basically be Quantity.:It is sold by the set, so it is high from the difficulty of obtaining it.
It seems that Small Spring is incorporated in Adjusteretc. even after procurement of parts, so careful assembly work with disassembling is necessary.
How was your experience with it?
The color of the Bar End was the same gold color as FANATIC's Bar End, but it still retains the gold/red color it had when it was first purchased, whereas the Bar End faded very quickly.
In the case of Lever, which is OEM and has no adjustment range, I thought Merit is the one that can obtain the dress-up and adjustment range with a high degree of confidence.
GlovesL Size Human Finger Quantity:It is wide enough to hang 2pc or 4pc.
It was installed on a CBR250RR (MC51), and when standing in a parking lot, it broke firmly at the notch and did not become undriveable.
When I installed it on my YZF-R6 (13S) and crashed on the circuit, it broke from the attachment (black colored part), and I was able to replace the entire lever and avoid being unable to drive.
[Included Parts:were they on?
I don't remember anymore, but I think they had everything they needed.
[Was there anything that disappointed you?
Although it is not a disappointment, it may be necessary to be careful not to be overconfident just because there is a notch, because in a special situation called a circuit, the notch is safe and it broke off from the root.
Compared to OEMs, there is more to gain, but the price advantage and avoidance of breakage due to lever bending will be lost. Still, it is easy to check the actual product at a real store and image it installed on one's own car, and there are many people who have installed the product, so there seems to be little concern about supply disruptions.
It is a part that is always visible when you ride a motorcycle, and it is a product with a high degree of satisfaction in terms of both appearance and function.
View detail
Parenthesis good!
There is no doubt about it. The color and finish are unquestionable. Fitting and accuracy are different. View detail
The grip is easier for Large, but…
I bought this one because I had a double problem with NORMAL Lever being too hard and too far away.
It was easier to get a grip on it, but I didn't feel much benefit from loosening the Adjuster on the hard one.
I'm also concerned about the Adjuster on the Brake lever interfering with the Cowl when the Handlebar Lock is in place.
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR
Lever Replacement
[How is it used?
It is mainly Touring.
Was the one you received as per Image?
The color was as good as the Image.
Was the installation difficult?
It was relatively easy.
It can be exchanged within 30 minutes.
How was your experience with it?
After the replacement, I drove it for a bit and it is fine.
[Included Parts:were they on?
In addition to the Lever set, the Small Clothes Sticker was included.
[Was there anything that disappointed you?
As expected
Instruction Manual is included and easy to understand.
Clutch lever is easier to use box wrench because of the switch box.
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR
The quality is fine, but...
CBR600RR (PC40) I bought it for.
The size is good, but the Clutch Side is not.
MAX grip on Handlebar Switch box
Buffer.
For your information.
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR
Parenthesis better
CBR600RR (PC40) I bought it for.
The make was good with no problems.
There was no interference with Cowl.
I am glad that the handlebar area looks tidy.
View detail
Stylish Design
The lever is made like an OEM Product and has no wobble and is easy to grip.
Luxury Design
View detail
Bought by color.
Bought it because it was closest to the OEM color Blue. It is easier to adjust than adjusting Wire because it allows for adjustment. View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX530, YAMAHA MAXAM
Also fits New ModelTMAX560
I installed it on my 2022New ModelTMAX560 and it fits perfectly. The GP Type is a little bit shorter than the Touring Type, so I thought I should have chosen the Touring Type, but I am satisfied. View detail
Fits: TRIUMPH StreetTwin, TRIUMPH STREET CUP, TRIUMPH SPEED TWIN 900
The length is …….
I bought it because it looked good on my previous vehicle and on my C125.
I chose the Short Type, which looked good on the C125, but this made it a bit …… difficult for me to do the Clutch.
Brake is so much better now, so I thought it would be good.
It has been a while since it was installed, but Clutch is getting used to it.
But …Short Type cannot be Recommendation for STREETTWIN.
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR
Installed on 2021 CBR600RR
I was concerned about the BALI on the inside of the Lever, but I drive with Gloves on, so it's not a problem.
On the current CBR600RR, when the brake lever adjuster is set to 5 and the left side is fully open, it interferes with the chassis.
Stylish and I'm glad I bought it!
View detail
Fits: HONDA CB650F, HONDA CBR650F, HONDA CB650R, HONDA CBR650R
It is always UK-sanRepeat.
I have used many different manufacturer's levers, but UK's products are the most precise and have the best texture by far.
I use it because the touch feeling of Brake etc. is also Linear and very good.
View detail
Fits: KAWASAKI NINJA1000 (Z1000SX), KAWASAKI Z1000 (water-cooled)
Is it really for Z1000?
I bought this for my z1000 14 MODEL.
Mounting Pitch is not slightly aligned.
I was forced to put it on, but it turned out to be a cutthroat Breaking!
There is no drag, but it is doubtful that this Level is really for Z1000!
View detail
Clutch switch will not work.
If you don't use the Adjuster at the far end to the third level, the Clutch switch will not work.
There may be a problem with the installation, but I think that improving the lever shape will solve the problem.
View detail
Replacement from OEMLever
The BMW 1000r has a clutch sensor, so I had to relocate the parts from the lever, but the work was smooth and accurate. I'm glad that I replaced it because it looks and feels very nice. If I may say so, the clutch lever is a little far away even when adjusted to the smallest position.
I think it would have been fine if I had chosen the Touring type.
View detail
If you're only replacing Lever, you'll end up settling for this
There are many products in the market that are less than half the price at Large hand mail order sites, but considering the accuracy and quality, I end up with this one.
I think it is a good product, but the cross-sectional shape of Lever may divide people's taste.
If anything, I'd be happier if I could choose the shape rather than the color variation, because the part where my finger rests is a little angular.
Either way, it's still a good product.
View detail