Reviews
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
I like it very much!
Higher than the OEM Screen, but not too high. I like it very much because it is not subject to wind resistance! I didn't dare go with Dark smoke, I didn't want to lose my view of the front. [Color] Purchased Smoke. The transparency is just right. There is a slight hole misalignment, but I don't mind. It looks really cool. I am very happy with my purchase. I am looking forward to the coming season! View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Tight and Parenthesis good
Installed on a ZX-14R, no gap at the bolt position, easy installation, well nut is not included, so you need to remove the OEM screen or buy OEM parts. The old well nuts are hardened and will not fit, so I bought new ones.
I think the style is tight and parenthesis is good. Depending on the individual's physique and position, the running wind will just hit the shield, and the wind cutting sound has become larger.
View detail
Zero gravityScreen
I bought the double bubble and it is perfect for touring. On highways, it is easy to drive because the wind hardly hits the car when it is slightly down. View detail
Not so bad, not so bad, just as expected.
There are no problems with the texture, performance, or location of the holes. View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
More effective than OEM
Selected with emphasis on design. In the normal position, the wind is felt from the area above the chest.
Of course, it provides better wind protection than OEM.
Dark smoke, so it is hard to see in front, which is normal when driving face down.
View detail
Perfect windshield
Looks cool and helps with the wind drag. Had a little bit of struggle when installing but the stock bolts will do just fine. Happy with the purchase. Altho have to order again since I crashed my bike and windshield broke View detail
Good quality, the shape of the double bubble is a bit "weird"
Some skills are required during installation. The original three fixed buckles of the windshield can be removed by adding a little detergent to lubricate, otherwise it will be difficult to pull out. The mounting hole closest to the outside is a little off. I don't know if it's a problem with the mold opening or my installation. The other 4 holes are just right, but this one is a little off. -------------------------------------------------- -------- I need some tips when installing. The three fixed deductions of the original wind can be added to add a little washing, otherwise it is difficult to pull down. The installation hole closest to the outside is a little bit, I don't know if the problem is the problem or I installed the problem, the other 4 holes are just right, that is, this is biased. View detail
Fits: HONDA CBR250R (2011-), HONDA CBR300R, HONDA CBR250R (2011-), HONDA CBR300R
The effect is Large, but the production is a foreign product.
In order to improve the appearance and windproof performance from the OEMScreen of the '14 MC41 CBR250RSecond Type Model, the Double bubble [Color] Buy Smoke.
I couldn't decide between the CORSAScreen made by the company and the Racing Screen made by PUIG, but I decided on this one because of its appearance and the fact that I got it cheap.
The product [Contents] It contains a body, an Instruction Manual, a Large Sticker, and two Large Stickers, which are the same size as the ones on the Screen side. (Apart from the included Sticker, the Sticker is pre-pasted on the ScreenBody)
I bought it a long time ago for my 03'ZX-6R and it came with a protective molding for the Screen, but it wasn't included in the package because of Cost reduction.
The product looks like Image, not too dark. [Color] It's like Smoke, and at a quick glance it's a beautiful product with no particular rough edges.
It has good accuracy of installation with the car body, and the position is perfectly set without any processing.
…However, if you look closely, you can see that the cut surface is not well processed, and the mounting holes that should be open are not open. (Lol)
The installation itself is simple because originally it removes OEMScreen, transplants Well nut and Rubber Bush for installation from OEMScreen, and installs it, but in the case of MC41, Side cowl removal, Meter panel removal, Upper cowl& However, in case of MC41, it is troublesome because it is necessary to detach Side cowl, Meter panel, Upper cowl & detach Headlight unit.
It is necessary to open it by Drill&Fileetc. because the hole which inserts and fixes the projection of Meter panel at the time of the installation of Plus mentioned above is not opened.
I've seen your blog on the Net. (That means it's not only our product …) If installed without this work, a gap will be created between the Screen and Meter panel, which will look awkward.
It is about the windproof effect, but in the usual riding posture, with OEM, both shoulders as well as the upper part of the chest is almost exposed to the wind, but after the replacement, there is no change in the wind pressure on both shoulders, but from the chest up to the lower half of the Helmet, you can feel the windproof effect from about 60-70km/h.
In a considerable speed range, there was a feeling that Helmet was shaken by a little change of the air flow until now, but whether the rectification effect of Screen was effective or not, the wind contact became soft and the feeling of being shaken also disappeared. To be honest, it was a happy miscalculation because I did not think it would change so much.
It is the distortionlessness of the field of vision that the manufacturer claims when it is put down, but in the shape of the Double bubble, without any distortion … is impossible.
There is no unnatural distortion of vision due to the Rose of thickness, but if you are concerned about it, I think CORSA is better.
It also increases the height of the Screen and [Color] With the Smoke, Meter visibility during the day is also better depending on the angle of the sun.
However, the presence of the Screen in the field of vision by increasing the height is bothering at first. … but you will get used to it after a day of riding.
I think that there are pros and cons about the appearance, but the custom feeling comes out at once. It's a good product with good cost performance in that sense.
I think that the Rubber parts of the Screen fixation are deteriorating in the age, so I think that it is good to Refresh this opportunity.
Personally, if you can tolerate a little bit of processing, this is a recommendation for a good cosmetic Custom.
View detail
Fits: HONDA CBR250R (2011-), HONDA CBR300R, HONDA CBR250R (2011-), HONDA CBR300R
It doesn't ruin the Styling.
I think it's quite good to match the chassis without destroying the styling of the CBR250R.
The rectification effect is not bad, and it keeps the wind down to the chest area.
There is no problem in terms of strength, though I couldn't screw it up only there because the holes didn't match.
Individual differences?
In total, I think the screen is satisfactory including styling and rectification effects.
View detail
Fits: SUZUKI GSX-R1000R, SUZUKI GSX-R1000
It's more of a windbreak than a regular Screen
If you are driving at high speed, you have to lean forward quite a bit as the OEM Product's Screen will not be able to get into your head.
However, if you change to the Bubble type, you'll be able to lean forward a little easier.
Therefore, I think it has been a good windbreaker.
View detail
look more tense
The GSXR1000's OEMScreen felt very much like a driving wind and I liked the look of it It was not there, so I replaced it
I just replaced it, so I haven't yet felt the way the wind hits it, but I'm sure it will be better than the OEM I think
For installation, I ported the rubber of the OEMScreen and installed it, but the position of the hole There was no such thing as a Gap
I think it's a very good product, both visually and practically
However, I have previously seen Zero Gravity's [Color] It was the same when I bought the Clear, but you can see the Wiring on the back of the Meter in full view LOL
I bought this time [Color] If you approach with smoke, you can see the wiring, so you can process it with cutting sheet etc may be necessary
View detail
It's exactly what I was looking for
This is a zero gravity screen of various screen shapes and types I bought it to replace the OEMScreen, but I wanted a certain height Therefore, I chose the Double Bubble Type The installation accuracy was good and it was possible to install it without shifting the cowl hole too much
The height is as you'd expect; get down enough to get a fist 1pc.minute between the tank cap and your chest and the wind It can be avoided As for the view when down, the Screen in Zero Gravity is "Inflation molding" It seems to use the same molding method as the airplane window
Maintenance But it is recommended to wipe off the dust first and then wipe it up with cleaner Recommendation
This is true of any Screen, but it's also true of any Screen that has dust and debris on it This is because it is prone to scratches when wiped with Dustcloth Quantity for good visibility:Pair (for Left and Right) I personally use it with that in mind as I think these are the parts that do I am satisfied with the product itself
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
More rectification than expected!
What made you decide to buy?
Looks and Price
How was your experience with it?
Although it is only a few centimeters higher than the OEM, the wind pressure received by the body is definitely reduced and riding is easier It is now
It went from being sticky on the Fuel Tank at high speeds to better with just a little bend
Was the installation difficult?
The Instruction Manual is in English and illustrated, but it is not Just take the OEM and attach it It is not necessary to remove the Mirror in the illustration Re-use the well nut, but it is easily removed
【Please tell me the installation point and hang】
If you peel off the protective tape attached to the shield, static electricity will be generated After installation, be careful of dust and garbage-deposited areas that cannot be cleaned
[Was the Instruction Manual easy to understand?
It was just the English Version notation and illustrations, but it's fine without it
[Included Parts:were they on?
Included Parts:No. You will need to replace the OEM well nut It is
[Others]
There are individual differences in the adherence of Quantity to the Cowl:Pair (for Left and Right) There was a difference in It was a slight Gap with no functional problems, so I use it as it is
[Do you have any products to compare it to?
The Manufacturer's Product Type
View detail
It was more than I expected
I chose this product for a little change of pace
When actually installed, there is almost no distortion in the landscape through the Screen, and there is no distortion in the Double The windproof effect of the benefit of the bubble has reduced fatigue
The accuracy of the mounting holes is also very high for a plastic part around the cowl
I'm currently using Pooch's Screen on the ZX10R, but if you're looking for more features, here's a Recommendation
View detail
Wow that's cool.
Very high performance, ease of high speed traveling.
[Color] It's Smoke and it looks cool too.
I think that the mounting accuracy was also good.
View detail
This is terrible
Accuracy was too poor to install. Thickness and shape, hole position is great Large. I thought that it was because another car model was delivered. View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
If Separate handle
zzr1400Bar handleSpec. It is attached to.
First of all it's Cool.
Dark smoke tightens Face.
I think that it is good as a rectification effect.
However, if you talk about Separate handle.
Bar handleSpec. It's good for you to hang on your shoulder and above for yourself w
I had a hard time peeling off the sticker pasted from the original. The pasted Sticker is cheap and dirty on PaperBase.
View detail
It looks like Parenthesis, but ...
I think that appearance was Exactly Screen on GSX 1300 R HAYABUSA.
Just when falling down, Mirror collapsed, damaging the edge of Screen.
It was a bit longer than NORMAL, so it was inevitable.
If I did not overturn, I had no problems and I think that it was possible to continue using it because it was only the end part.
However I am Tank Bag (GIVI GIVI : Tank Lock [XS307] ), So I can not lie hidden by all means.
In this screen, we could not cover Cover a little.
View detail
Overall it is good making, but the individual difference is Large - - -
At last the external screen Screen was released after 2014 MODEL, I bought it first.
The impression that I tried to install changed the image of the front to a glitter and I feel that the windshield effect has become somewhat better than genuine. Although I think that it is the only problem, I think that the gap between the screen and the cowl after installing the cowl is big because the individual difference of the product is large. Especially the gap of mirror attachment part is large. Also, left and right gate cut (Finishing) It seems a little sweet and the length of the left and right differ. I think that it is a molding problem, I think it would be nice if the quality is a little higher. There is no problem that it is split or big vibrating sound is big because the gap between the left and right is so large at the moment. So installation - Regarding accuracy, we will also make ☆ 2 with future expectations included.
View detail
Windbreak effect Up
Bar handleSpec. So in Normal screen I felt the bad weather at high speed running. After Screen exchange, NORMALSeparate handleSpec. It became a feel like that.
Fit feeling, it looks very well and I like it very much.
View detail