If you want to do your own maintenance...

I already owned SK11 Fujiwara Sangyo's digital torque wrench for 3~60Nm for Spark plug and Small size Screw, but I wanted to tighten it at 59Nm for Torque management of Axle Shaft by removing and installing Wheel, so I needed to purchase Large Range 6 I needed to purchase a 6.8~135NmDigital torque wrench.
Since the range is from 3 to 60Nm, if the value is 59Nm, the digital torque wrench that you already own would be OK, wouldn't it? However, the Torque wrench's accuracy is higher in the middle of the range, and as you go to the end of the range, the accuracy drops.

Switching from the pre-set type to the digital type requires some getting used to, as the buzzer sound and LEDMeter are used to determine when to stop.

I think the Torque numbers are correct with the inspection certificate included, so I think it is safe to use. View detail

easy to use

Self-maintenance and maintenance of motorcycles requires a precise torque wrench. The SK11 digital torque wrench purchased by webike has an accuracy of ±3%, which is sufficient for daily use. The digital display is more intuitive and not easy to make mistakes. The measurement range is 3-60 N meters cover almost all screw torques on a motorcycle. -------------------------------------------------- -------- Maintenance and maintenance requires a precise torque wrench. The accuracy of the SK11 digital torque wrench purchased by Webike is ± 3%. Mi covers almost all screw torque on the motorcycle. Powered by Google Translator View detail

A must for Maintaining

I think it is a necessity for Maintenance.
The Torque used frequently is supported, but the ASKULNut and others require 110 Nm, so a different Torque wrench is needed. View detail

A little troublesome to set up.

This is my first time using Digital torque wrench. I guess it is a matter of getting used to it, but the settings are a bit cumbersome.
As for performance, I think it's fine because it covers the most Torque range of Motorcycle tinkering.
It also provides light and sound notifications, making Torque management easy. View detail

A must for low Torque measurements

I purchased this product to replace the stud bolt on my NSR250R Cylinder.
Low-Torque areas will be the source of Cracks if they become Overtorque even a little bit.
Torque management is essential.
So we used this one, and we are glad that we were able to use it successfully. View detail

Very easy to use once you get used to it

I had been using a low- and high-Torque pre-road formula, but the accuracy was nowhere near as good, so I got excited.
6.It can be used in a wide range of applications because of its wide specified Torque range of 8N-m to 135N-m.
It was difficult to understand how to use it at first, but I got used to it by looking at the Instruction Manual.
Digital type is still convenient because it informs me by Buzzer.
It is also used for Tire replacement on cars. View detail

It'll take some getting used to.

I was troubled between this product of Fujiwara Sangyo and STR3-60 of the pre-set type because the torque wrench which I am using now became old, but I decided to buy this product for the first time. I bought this product of Digital type for the first time.
It took a little time to get used to it at first because it is judged by the sound, the flashing of the LED, and the numerical value visually.
It's good to work in a position where you can see the LCD display, though, because at least you can see the values.
When I can't see the LCD display because I use it upside down, I have to rely on the sound.
Because the battery is consumed even if the power is turned off, it is troublesome to take out and install the battery, but it is said from the frequency of use, and is no problem?
The screw of the battery lid is not to come off from the lid, and the consideration not to lose it is good. View detail

The functionality is good, but there are concerns about accuracy.

The current torque is displayed as a peak hold, which is very easy to understand, and the torque adjustment range is wide. (3-60N・m) It is very convenient.
I think it is very intuitive and well thought out without having to read the Instruction Manual.

The only thing that bothers me is that the Torque value sometimes doesn't change even though I'm tightening it, so I'm not sure about the accuracy.
I felt that I needed to tighten it consistently at a certain speed, not too slowly. View detail

Price suitable

I bought this because my Torque wrench was broken.
I've been longing for a Digital system for a long time, so I chose this product with its wide Torque range.
The feeling of use is that the Analog type is better when it becomes a specified Torque. Pushing! I like the feeling of
The Digital system is judged by sound, so it is difficult to use if you are not used to it. View detail

I don't have any problems using it.

I bought this product for Torque management on my Mini bike because it has a wide range of measurements and is inexpensive.
I used it at 29N-m, but it takes a lot of force and it is inevitably overtorque.
You may get used to this, but I thought that Pre-set type is simpler and easier to understand.
Also, the Buzzer sound is quite large, so it's a good idea to use it at night. I put Seal on the speaker part to reduce the sound.

I was curious about the Quantity:Pair (for Left and Right) The assembly of the switching Dial must be Gap.
The Package and other Review images are clearly Gap.
I have no problem using it, but I am concerned about the proper assembly of a product that requires accuracy. View detail

Wide measurement range

[How is it used?
I already have a torque wrench, but it doesn't measure low torques, so I decided to buy this product which can measure low torques.
I bought it

Was the one you received as per Image?
Image

How was your experience with it?
When it gets close to the set torque, the green lamp turns on, a pippi sound is heard, and when it gets to the set torque, the red lamp turns on.
The sound changes to a continuous beeping sound.
Even if you don't set the Torque, the value will increase as you apply Torque, so you can set the desired Torque by looking at the value.
It's Compact so it will be useful around Handlebar and Spark plug replacement.
The lid of the battery is stopped by the screw, but there is no worry about losing it because it is held in the lid side even if the screw is removed.
There is no cuckooing when you get to the setpoint.

[Points to note]
I think it varies from person to person, but I felt the sound was Large.
Even if you turn off the power, the battery is still drained, so it is troublesome to have to take out the battery after use.
Because the length is short, it may be Large strange to work near the upper limit of the measurement range.

How did it compare to other products?
The famous brand products are expensive and I was worried about the durability and accuracy of the no-name products.
It's made inTaiwan, so I think it's solid.
Here is a LINK to the Handling Instruction Manual:http://180.42.73.61/volume/00017/imag/file35273/t010003527233.pdf
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer View detail

Used for Engine assembly

I'm satisfied with the Large variant because I can see the fine load with my eyes because it's Digital. View detail

Usability is good

I used to use a pre-set Torque wrench, but for the first time
I bought a Digital torque wrench.

Digital would be easier to see before using it, and the Peak hold function and
I thought it would be convenient to check the Torque on the Digital display while tightening.
I was thinking.

Even if it actually uses it and sees it, it is true that the Peak hold and the Lamp and Buzzer
I thought it might be useful to tighten it up.

However, when it comes to the comfort of use, the Pre-set's cutin
and I like the way it cocooned my wrist.

Also, I'm sure this varies from person to person, but even for me, who is said to have large hands, the handle is a little too thick, which I think hinders the comfort of use. View detail

It's easy to use, even for beginners.

I bought this one to change the engine oil at home.

Quality and texture:.
The Button and Grip areas are solidly built; Button's Response and grip are solid.

Performance/Functions:.
As mentioned before, it is a satisfying feature because it tells you by sound and light when you are near the setting Torque.

Ease of use:.
There is a slight hassle to get the batteries in and out each time.

Cost performance：
Compared to other famous manufacturers such as KTC, the cost performance is high because the price is reasonable and the torque management is solid.

The fact that it is more affordable than other torque wrenches was the deciding factor.
I've only used Analog's Torque wrench until now, but after reading the Instruction Manual carefully, I was able to use it.
It's easy to understand with sound and light, even for maintenance novices. View detail

very good

At first I bought a cheap Torque wrench and used it, but the response came and went I've never been able to find a reliable tool to play with the Engine I bought this one, which is relatively inexpensive, because I thought I would need it It's very handy as it notifies me with sound and light when I get close to a set torque I've seen some reviews about the battery life, but I haven't had that problem with mine It's probably a mechanism that turns off after a certain amount of time without a reaction, but if you put it in a bad way, the torque may be It keeps responding as something that is on, and I think it's because it won't turn off forever I think It's one of the best things I've ever bought, as I use it a lot View detail