Reviews
Fits: YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX
I am glad I bought it. It is long and can be installed in many ways.
[How is it used?
I installed this on a 2019 NMAX 155.
I have a small Mirror mount that I had on my motorcycle in the past, but I was interested in purchasing this product after seeing other motorcycles with this product installed.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is easy to remove and install OEMMirror.
The Instruction Manual is also minimal, but I could work by feel without looking at it.
After installing it, I thought that the bar comes surprisingly close to the front.
How was your experience with it?
I immediately attached the Smartphone Holder and the wide mounting location makes it very easy to adjust the location.
It is nice to be able to make fine adjustments, such as making it in front of you or shifting it slightly to the side.
Also, even with the Smartphone Holder installed, there is still plenty of room for a USB or HelmetHook.
This depends on the shape of the Smartphone Mount, but the one I have pops out quite far forward, so Navigation is not in view in my normal riding position.
Obviously, you have to move your eyes, so that is the only part that is a little difficult to see.
[Was there anything that disappointed you?
Nothing in particular, but I'm sure it will rust soon after being exposed to rain for a while.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX
multifunctional bracket
My motorcycle is YAMAHA NMAX155. I bought this DAYTONA multifunctional handle bracket from webike. It is firmly fixed on the original rearview mirror base. It is fixed with M10 screws. The diameter of the pipe is 22mm, and it can be installed with mobile phone brackets and other accessories. Design Simple and easy to use will not affect riding safety. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. I bought this Daytona multi -function handle stand on Webike. It is fixed on the original rearview mirror seat. It is fixed with the M10 screw. Simple use will not affect cycling safety. Powered by Google Translator View detail
It's convenient
It is easy to install and very convenient. I have JuiceHolder, Smartphone Holder and USB power supply. View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX
I used it for VMAX.
I bought it because it seems to be able to be installed in VMAX when I measure the size though it is NMAX. there is a little obstacle because there is no product of this type for VMAX, but it is easy to see when I use a smartphone as Navigation. The difficulty may be that it is difficult to see the indicators on the Tank depending on the lighting position. View detail
Fits: HONDA Forza300, YAMAHA MAJESTYS, YAMAHA MAJESTYS, YAMAHA MAJESTYS, YAMAHA MAJESTYS, YAMAHA BWS125(BWS), HONDA FORZA(MF10), HONDA FORZA Si, HONDA glom, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125
More breadth!
PCX125 (JF28) When I tried to install the clicker of the smartphone mount to the handlebar, I could not install it because there was not enough room for the shape of the handlebar and clearance.
So I bought this one to install a clicker.
Clicker:https://www.webike.net/sd/24189214/
[How is it used?
In use.
Was the one you received as per Image?
It was just as Image.
The texture is appropriate for the price.
The rigidity is also sufficient.
Was the installation difficult?
It was very easy.
How was your experience with it?
I was able to fix the clicker with no problem.
It's been in place for about a month, but the Screw hasn't loosened, and it's fixed.
[Included Parts:were they on?
It was attached properly.
[Was there anything that disappointed you?
Nothing in particular.
Other items that would be helpful
Point and hang of installation
It was only to remove the screw under the front of Master Cylinder which is easy to access, and to bite the Adapter there.
It is more efficient if you tighten the screw on the Mount bar side a little first so that it doesn't bran.
It takes less than 10 minutes to Bolt On, but you will need a Hexagonal Wrench and a Hexagonal Spanner.
[Availability and clarity of the Instruction Manual
Instruction Manual is attached properly.
I can kind of tell just by the product.
[Notes]
In this kind of product, the paint often peels off from the part where Gold genus and Gold genus touch each other, and RedRust occurs from there. I don't see any sign of it after a month or two, but I think it will last a long time if you spray it with Rust Stopper from time to time.
The Mount Bar Body is the same, but the Bracket Only is different.
If you don't mind a little Gap, or if you use a Universal Bracket from Home center or 100 yen, you can install it on various cars.
View detail
Digimono Mount Bar
Most of the electronic device mounts are designed to be mounted on the handlebar of a large body. However, when it comes to scooters for commuting, it is difficult to mount them because the handlebar is not exposed.
Quantity:Pair (for Left and Right) The Mount bar has a wide range and can be used to mount a variety of objects because it is mounted as a bridge to the Mirror section of the
I only have the USB power supply out and the phone mount on mine, but I think I could still put something on one or two of them.
As noted above, Mirror hall's Quantity:Pair (for Left and Right) The bar is positioned to bridge the gap between the two, so it can be mounted anywhere it is easy to see.
In addition, the Scooter that I own is a little unusual type of car, and naturally, there was no fitment, so I diverted for other types of car. The product itself is a simple bar, so if you measure the angle of the screw fastening part and the length of the bar body, the diversion itself was not so difficult.
View detail
Mostly good!
[How is it used?
Purchased for installation on a Minor vehicle rather than on a BirdCity
Also, I was going to make my own Bracket from the beginning, so "Ease of installation. has been omitted.
Was the one you received as per Image?
I don't have BirdCity, so it's a mystery to me whether it's the same as the Image from BirdCityUser's point of view.
Was the installation difficult?
Because Mirror hall was far away, I made a wide bracket for Bird City and a wider bracket.
Other than that, there are no other special difficulties. I just envy those who have a car model specific product.
How was your experience with it?
It was installed securely without any strange wobbles.
[Included Parts:were they on?
Pipe and Bracket Only.
[Was there anything that disappointed you?
I've used it before on other vehicles, so it's what I expected. It didn't exceed my expectations.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX
I'm glad I was able to install it because it's not for the VMAX.
I tried it because it seems to be able to be installed when I measured between the mirror mounts though the VMAX is the car which has not been confirmed to be fit for installation because it is NMAX and NMAX 155.
The result is a decent installation and very easy to see when using my phone as a Navigation, but the Blinker and Gasoline Indicators, RPMs, and water temperature meters are difficult to see.
If you use Vertical type Smartphone Holder or adjust the angle, you can see to some extent.
I don't think this is an Exclusive Design product in this area.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX
Bracket.
The paint is not so good, but I think the strength is fine.
I was going to use a bar handle, but I installed it as a temporary spec. Simple and I like it!
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX
More convenient than the Convenience Holder
NMAX has Pocket, but it's tough to use your phone as Navigation It is
In order to make a place to mount the Smartphone Holder, this I bought the Mount bar from DAYTONA
Because the installation is the same as Mirror, it can easily be done if you have a 12mm wrench Because I have also attached the Hand guard of Y's Gear, it is necessary to make the Mount bar and the Hand guard of Y's Gear to be attached at the same time I was able to install it with no problem
NMAX can be used to attach a Convenient Hook or Helmet holder to the Main I often use the Bolt under the key, but that location is difficult to use, to say the least
This Mount bar and the Convenient Hook and Universal Helmet It is better to use it with the holder It's better not to use it while driving because of the weight on the handlebar
I've been using the Mount bar on my Daytona DL1000 V-STROM650, but It is a good product that is safe to use It is a bit heavy, though
View detail
Fits: HONDA Forza300, YAMAHA MAJESTYS, YAMAHA MAJESTYS, YAMAHA MAJESTYS, YAMAHA MAJESTYS, YAMAHA BWS125(BWS), HONDA FORZA(MF10), HONDA FORZA Si, HONDA glom, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125
Is it too expensive?
Big scooter type? I bought the MAJESTYS of the MAJESTYS and I bought it I'm not particularly useful at this point because I'm not a fan of attaching my phone etc. to my motorcycle However, it is good for the dress-up feeling and for improving the rigidity of the handlebar area However, I think the price is too high for the product I feel that 3,500 yen is high for a simple iron bar It would be nice if this was a lightweight AluminumMaterial etc I think that the stiffness around the Handlebar will be different between just attaching and not attaching It's one of the parts that I'd like to wear View detail
no problem!
We installed Multi Mount BarFE on BirdCity. There are various prices for this product in Pin Kiri, but first select the product that seems to be problematic also by looking gently on the pocket and also looking at the cheapest on DAYTONA again. The installation is also OK, the bar itself is Steel so it's a bit heavy, but I think that even if you look at the mounting state it will not be closed off even compared to other expensive items. - - - So, what will you install in this bar? - - - "Better safe than sorry." I can not tame Custom! Fashion! (^ ^ ♪ View detail
good!
I received three days to order it. Mounting is fairly easy. It took about an hour to start a complete novice. TThe product finish is also good. It seems to be the right quality at the right price. I recommend it! : ") View detail
Fits: HONDA Forza300, YAMAHA MAJESTYS, YAMAHA MAJESTYS, YAMAHA MAJESTYS, YAMAHA MAJESTYS, YAMAHA BWS125(BWS), HONDA FORZA(MF10), HONDA FORZA Si, HONDA glom, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125
Because it has universal nature, it seems possible to install it in various Motorcycle
My Motorcycle, GSR 250 is for Separate Handle,
You can not install Smartphone Holder or USB power supply like Pipe Handlebar. (Image 1)
There is a mount bar with Mirror bolt attachment and Lever holder attached Stem hole attached,
Mounting position and difficulty (Parts must be prepared separately) There was, and as I was looking for,
Bracket part has degrees of freedom, Material : I found this item that is not as expensive as Aluminum.
Although it was described as for PCX, GROM, MAJESTYS,
"Somehow it will become possible - - - I thought, I attempted the installation work and tried installing. (Image 2)
There is another mount bar in the Left Side, but I think that it can be installed even if it is NORMAL.
Bolt that is included in the product is M6 × 35 mm, but because it is too long for GSR 250,
M6 × 30 mm for Bolt of Handlebar Lever of GSR 250 Quantity : Because it was able to install just by preparing 2pc
I am satisfied that Portable navigator was installed at the position I expected. (Image 3)
View detail
I thought that 6000 yen was expensive
I always thought that I bought less than 4000 yen goods.
Quality is no problem and it was the item you wanted.
However, as I installed it according to the instruction manual, I came up to the point so far that I felt it was in the way, so I installed it in reverse..
In addition, because it was caught on Adapter this time, it got a little higher, but the one attached to the bottom of the Adapter may not get in the way more.
Looking at the situation at the current condition, if you still feel disturbing, I would like to try it at the bottom.
View detail
Fits: HONDA Forza300, YAMAHA MAJESTYS, YAMAHA MAJESTYS, YAMAHA MAJESTYS, YAMAHA MAJESTYS, YAMAHA BWS125(BWS), HONDA FORZA(MF10), HONDA FORZA Si, HONDA glom, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125
I can Universal
Because the included Bracket is Universal, most Scooters - I think we can install it in Motorcycle.
Material : Cost is also cheaper than Aluminum Simple and Black place is favorite
We have secured places to install Smartphone Holder, USB, Cigar socket
View detail