Reviews
Carrier with excellent design
I put it on crf250rally50 and md44.
The design is clean and it is also an excellent Grip for Tandem rider.
The only thing that is a little disappointing is that the Seat is harder to put on and take off, but compared to other companies, the quality and ease of use is outstanding.
liked it
View detail
It is very useful to put up a Case
[How is it used?
I wanted to install a Case so I could put my hand luggage in it when I commute to work.
Was the one you received as per Image?
Yes.
I'm sorry to say that I'm begging for something, but it would be perfect if there were not only black but also chrome plated as color variations.
Was the installation difficult?
The only work to be done is the removal and attachment of the Nut.
The DIY-loving woman worked alone, and the project took less than 30 minutes.
It would have been easier to work with one other person, but it was easy to work alone.
How was your experience with it?
The nominal value is supposed to be 6Kg load capacity.
I use it with Case + luggage weighing about 10Kg.
(At your own risk, of course!)
So far, I have had no problems with it.
If rattling, damage, or other abnormalities occur, discontinue use at that time.
It is hard to believe that it can only hold 6 kg, although it is also claimed to function as a grab bar.
We won't be responsible for any problems that might occur if you put something heavy on it." We have decided that this is an excecution from the Manufacturer.
→ or do you mean up to 6Kg of luggage that can be loaded when running Tandem?
[Included Parts:were they on?
Yes, I have. There was no shortage.
However, in order to co-tighten with the side bag support, an M8×65mm nut purchased separately was used.
The included M8×45mm Nut is unused.
[Was there anything that disappointed you?
None in particular. As expected.
As for the color variations, I purchased it knowing it was Black.
this Disappointing. would be missing the point.
Point and hang of installation
If you are used to customization and DIY, this should be obvious to you.
When tightening the Nut in installation, if you tighten a particular part too deeply at once, the Nut on the other side will not be able to reach the back. (For ease of installation, use the Quantity:Pair (for Left and Right) (This is because there is more space between the)
First, tighten the One Side nut loosely enough to prevent it from coming off, then do the same for the other side.
Quantity:Pair (for Left and Right) Both Sides, after all four Nuts have reached the back, retighten evenly etc., and gradually increase the Quantity:Pair (for Left and Right) I think it would be a good idea to fix them in such a way that the spacing between the
*It's hard to explain in writing…….
View detail
DAYTONA product Triple is installed around the back of REBEL.
A Grab Bar Carrier was installed to increase the load capacity and to attach a seat bag.
The Reversible Backrest and Side bag support were already installed, so it was a triple installation. The Grab Bar Carrier has a thicker pipe and a larger cargo bed area. Installation is easy with a Hexagonal Wrench as per the manual.
The cargo bed would be more spacious without the backrest, but since it is a Tandem, the backrest should be attached.
Saddlebag Support Mounting Kit is required for installation. (97065) is required and uses some of Kit's Bolt and color.
Triple installation is done in the following order:Backrest, Grab Bar Carrier, and Side bag support on the vehicle body.
The cargo bed is also made of Seat and Flat, which gives it a more rugged look, and I have replaced it with a KIJIMA Tail lamp, which does not interfere with the Grab Bar Carrier. The appearance and texture are good, though.
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L
Bolt On for secure mounting.
There is an Instruction Manual for installation, but you don't need to look at it except for very beginnersLevel.
I often hear that other companies' carriers are not aligned properly and are adjusted by tapping them with a hammer,
As expected of DAYTONA, it is elaborately made down to the millimeter.
It was a complete Bolt On.
The paint job is perfect, although the reinforcement seems tasteless with only horizontal bars,
This is good. This is good. Add nothing. Nothing is subtracted.
The shape is also in line with the Rear Fender, and there is no overhang of the Large size.
There are multiple hooks for easy hanging of touring net.
The space between the Fender and the Tandem rider allows for a firm grip instead of a grab bar.
Pannier installation is done after attaching Base to Carrier first,
In the combined state of Carrier + Base, the Carrier can be easily attached to the car body.
On the other hand, Base installation is very difficult after Carrier is attached to the car body.
If you are in a hurry, you can get there.
As for cost performance, I would like it to be less than 8,000 yen.
Is it difficult with the skyrocketing prices?
View detail
Made by DAYTONA for safety and stability
I bought it because I wanted a stable cargo bed for my camping gear.
In my case, I am wearing the company's Saddle BagSupporter as well, so the included screws were not long enough, so I used the Button capScrewM8 separately. (thickness=8mm) × length=75mm purchased from Screw shop and installed.
View detail
Well, for the time being, I guess.
There are not many carriers that can be attached to the Gixxer 150. They are either OEM, DAYTONA, Endurance, or SHAD.
Like the DUKE, the underside of the box, which is not usually visible, is prone to rust. (Lol)
Also, like DUKE, if you don't extend the Carrier, the TandemPartner is too narrow if you put a 40 LOver Box on it!
Well, I guess that'll do for now.
By the way, DAYTONA Item number:17448
https://www.webike.net/sd/24232576 /
The difference between the two is the Helmet, but it's too much trouble to remove the Seat every time, so this is fine. (Lol)
View detail
Fits: HONDA Rebel 250, HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel300
Easy to install
When I received it, it was larger than I expected. Is Rebel this wide? The size was so large that I thought I got the wrong one. I'm very happy with it.
I just installed it and it looked good.
It's easy to install.
The Bolt on the side of the REBEL is hard to remove, and when I installed the Side bagBracket, I couldn't remove it and put it on with a knapsack.
↓
I had to go back to Naps because the screw locker would not come off and the local motorcycle shop would not take it off.
It took some effort to install, but this itself and the installation was instantaneous.
View detail
Fits: HONDA Rebel 250, HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel300
Easy to load various bags of DAYTONA
Since it is difficult to load luggage on the REBEL 250, you will have to attach a side bag or seat bag.
I decided to put on the Rear Carrier because I was a little worried about the seat bag alone.
I used to use mainly the Side bag, but now that I have the Rear Carrier, I use mainly the Rear bag.
The fact that it can be used for Grab Bar means that it is well made.
I used it with KIJIMA's Side bag support, and the angle of the bracket is just right, and the finish is not uncomfortable even when the Side bag is not on, which is kind of nice.
The part for luggage is about 30cm wide, and this is the same width as the bag on the DAYTONA Henri Biggins, so even if you have people on the Tandem, you can load up a bag for camping. If you are going to play around the neighborhood, I think it is enough. This time, I put on the 2-way Seat bag, and it is just right.
The height of the bag is just right with the double seat of the Grom Parts, so even a bag with a slightly larger size can be loaded well.
Although it is not a difficulty of this Parts, the bolt of Rear Fender of Rebel 250 is too tight and it is difficult to remove.
Also, when you retighten the bolt, if it is not aligned with the bracket and support of the Rear Fender, the screw hole will be ruined soon. If you are worried about this, it is better to have a motorcycle shop do the installation.
View detail
The load capacity and design are 0
I chose this one because it looks sturdy and has good load capacity among several types of Carrier.
The installation is a bit time-consuming because you have to remove all the Seat Cowl from the Side cover and drill 22? holes in the SeatCenter cowl, but it is safe because it is a structure that can take the weight of the Bolt fixed with CarrierCenter.
The CarrierBody is an ordinary shape, but it extends in a straight line from the Seat, so you can load large luggage from the Seat to the Carrier without any difference in level, and you can also hang a rope on the Grab Bar part that extends to the SIDE of the Seat, so you can load it stably.
I think you can put a large amount of luggage on it for camping touring.
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L
CRF250RALLY 2021 Non-conforming
============================================================
The product you are inquiring about is compatible with CRF250 rally up to 2019MODEL.
Cannot be installed on 2021MODEL.
============================================================
The following products are compatible with the 2021 MODEL.
Item number:18845
https://www.webike.net/sd/24578480 /
Delivery time:About 2 weeks
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L
CRF250RALLY REAR RACK
The manual was in Japanese, so I was embarrassed at first, but I could solve it through a translator. It fits my 2020 CRF250 RALLY like a genuine product. However, when you shake it, you hear something rolling inside. There is no problem with the performance, so I decided to just use it. View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L
crf250rally rear rack
Fits well on my 20th Rally, as sturdy as a genuine product and very easy to install with reference to the manual. However, it doesn't matter because there is no problem in performance and quality although there is a sound of metal scraps rolling inside the carrier to see if processing is wrong. I have a sturdy luggage rack --------------------------------------------- ------------- 20 Year Pointed well Rally, fitted also very durable and easy to refer to the manual as a genuine product. However, it does not matter, because the sound of drumsticks that are processed incorrectly attending paillette rolled inside the carrier no longer performance and quality yen. I got a strong jimdae Powered by Google Translator View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L
It's expensive.
The rust is already starting to appear.
The price is too high based on material and construction.
The Installation Manual for installation is also quite unfriendly in some respects.
Ahhhhhhhhhh!
View detail
Jixxer 150. (Initial Model) to Exactly
Design is the Jixxer 150 (Initial Model) It is Exactly. I think this Rear Carrier is good for your jixxer and it's also good for your parenthesis. It is also possible to attach a Seat bag to this because there are 4 Loading Hooks on it.
The weight is a little bit heavy because it's Steel, but it's a 4kg load-bearing model, so it's probably not worth it in terms of strength.
It's a solid Carrier.
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L
I'm impressed with the precision and ease of installation!
I was using a certain KIJIMA product. In CRF250L which is necessary to take off Carrier when removing Seat, I had to close it by force every time I took off.
Made by DAYTONA, the dimensions are perfect from the start, and then no Stress to remove! You can buy this one.
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L
Quality is satisfactory, but the price is too high.
The diagrams in the Installation Instruction Manual are confusing and inaccurate. I found out only after a phone call. The diagrams and instructions should be corrected to be correct and easy to understand. View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L
I love it and use it
I bought this because I need to carry my stuff from time to time
It is easy to install, so I use it only when I use it So it's easy to use
The only drawback is that the paint is thin and peels off easily
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L
Easily load your Solo touring bag for peace of mind
I've been wearing my Solo touring bag on my Seat, but I just couldn't I bought this one from the aspect of strength because it is impossible to Riding position Only Screw part of Seat took some time to install, but it was easy if I got used to it It is too simple in terms of design Hmm I thought it was a good idea, but it doesn't matter as long as it's loaded, and it's strong enough to help with the handling of the vehicle, so I'm happy with it I'm doing it I'd be even happier if this was less than 10,000 yen including tax... (laughs) View detail
Functioning as a Carrier is fine
The Carrier feature is fine, but
I had a hard time with the 4 mounting holes of the Carrier when I installed it
Especially Quantity:Pair (for Left and Right) I pulled the edge of the Carrier with one hand to align the holes with the Bolt
Is it because it's welded, so there are individual differences?
The 35LBox of LEAD Industries is being used with it on, and it does not wobble and is large and strong
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L
good
Not only to stuff the luggage but also to make it easier to cause when mossed 7 kg load = heavier so I think it looks awkward, buy here.
No need for processing to install, easy to install.
The height is suppressed and there is little sense of attachment, it does not damage the apparent Balance of the whole vehicle.
Three ladders in the middle are not casual. A bit more Parenthesis, no complaints. (Star-1)
View detail