Reviews
I use it every time.
I use it every time as it seems to work well with Aluminum drain bolt. View detail
Used for oil exchange
[How is it used?
I used it for Oil exchange.
How was your experience with it?
I didn't notice any difference between Copper Washer and Copper Washer because of Coating.
It can be used just like a regular Washer. The price per unit is high, but this is enough for me since I do not change the oil frequently.
View detail
High quality!
I bought a high-end Drain bolt gasket because it is not that expensive. It looks good, but it also seems to be effective in preventing loosening and oil leakage. In fact, even with a NORMAL gasket, if you use a new gasket and tighten the drain bolt with the proper torque, it won't leak, so it may not mean anything, but it makes me feel good. View detail
Relief
I used to use Copper Washer, but I decided to use DAYTONA's Anti-StickCoating Washer to prevent oil drain bolt from bleeding.
Quantity:Since it is 1 set of 3pcs., I think you can handle most oil changes if you buy M12 and M14.
View detail
I was satisfied!
I bought a Drain bolt gasket when I replaced the oil in my BALIUS. The price is cheap and the quantity is very reasonable.:It is attractive because 1 Set of 3pcs.
I will purchase another Daytona Gasket when I run out.
View detail
DAYTONA Drain bolt gasket
[How is it used?
Currently in use
How was your experience with it?
It is a necessity for Oil change. It firmly prevents oil leakage.
How did it compare to other products?
It is comparable to the OEM's. The price is not too expensive.
[Points to note]
Please be careful not to over-tighten.
Other items that would be helpful
Included Parts:Yes/No
None
Items to buy together
If I had to say, I would say Torque wrench.
View detail
I use this one all the time.
Feels better than OEM Product
I change the oil frequently, so it's convenient to have 3 in the package.
View detail
When changing oil.
[How is it used?
We replaced the oil in conjunction with the MT-25 oil change.
I purchased this product because I have used this product in other cars with different Sizes.
How was your experience with it?
I have changed the oil at every oil change and have never had any oil leak.
As long as Torque is managed properly, it is a product that does not cause any problems.
How did it compare to other products?
I don't think it is particularly comparable to the OEM DrainGasket.
[Points to note]
Torque management daiji.
【Review】
We have used it many times and the Oil has never leaked.
Quantity:It would be good to buy regularly in 1 Set of 3pcs. to avoid forgetting to buy.
It was a bit of a hassle to find out what size fits my motorcycle, so it would be easier to choose if the compatibility information was added.
View detail
To change the oil.
It is used when changing Oil.
Since it is made by DAYTONA, it gives me a sense of security.
Quantity:1 Set of 3pcs. but we will Repeat again when we run out.
View detail
Here it is for now.
I purchased this product when replacing the oil in my CB750F.
Plain Washer is fine, but I happened to buy this one.
I hope Coating will prevent oil leakage.
View detail
Besides Motorcycle
It is a little expensive per pc. but I am satisfied with the feel of the product.
I used this product because I didn't have any Stock when I changed the Oil in my car.
View detail
It is a consumable item, but it is made by DAYTONA, a trusted manufacturer.
DrainPacking is a consumable item and is replaced every time.
Inexpensive Material:I had been interested in this product for a long time because I ran out of Aluminum packing.
Material:Aluminum products have no problem when used with proper torque management, but DAYTONA's unique coating, which is safe for motorcycle products, gives us even greater peace of mind.
I use the CUB110 for my daily commute to work, and there have been no leaks for several weeks after replacement, as a matter of course.
They also sell in bulk, so I would like to buy again after I use up the three pieces this time.
View detail
Seems to be a high performance Drain boltGasket.
[How is it used?
To be used for Oil replacement of XJR400R [webike Purchase at
I usually use Yamaha OEM Washer, but I was attracted by the fact that it comes in a three-pack because I change the oil three times in a year.
Was the one you received as per Image?
It was just like the Image. It certainly has a different aspect from the ordinary OilWasher.
How was your experience with it?
No oil leakage.
Frankly, it's not a leaky part if Torque is managed properly...
[Points to note]
None in particular. There doesn't seem to be any backsides. If I may say so, make sure to manage Torque well.
How did it compare to other products?
I used to use YamahaOEM, but this product is cheaper per sheet and the performance is the same, so I will use this one from now on.
View detail
I have a few spares.
I always have a few spares because if I don't have them when it comes time to change the oil, I may have to reuse them. View detail
every exchange
Do not be stingy when replacing Oil, and replace it every time. View detail
Easy to use
Quantity:1 Set of 3pcs. is economical and easy to manage Torque. View detail
de Raster for Replacement
It's three pieces of peace of mind.
I think it's a good buy since it comes in a pack of three for this price.
View detail
I purchased Repeat
[How is it used?
I use it on my Grom and Monkey 125 along with SP Takegawa's Drain bolt.
So far, I'm satisfied because I can use it without worrying about oil bleeding.
How was your experience with it?
I think the regular aluminum gasket will be fine, but this is for those who want to splurge a little on large consumables for their car.
How did it compare to other products?
I haven't compared it to other companies' products, so I'm only comparing it to OEM products, but I think some people might find the price a little high.
The quality is acceptable to me personally.
[Points to note]
I don't have a specific one, but I would say that it is important to keep the tightening torque and to replace it with a new one every time.
(I'm patient, even if it feels a little wasteful.)
View detail
Fits: KAWASAKI KX60, KAWASAKI KX60, KAWASAKI KX100, KAWASAKI KR250/S, KAWASAKI KR250/S, KAWASAKI KLX450R, KAWASAKI KLX250SR, KAWASAKI KLX250ES, KAWASAKI KLX250, KAWASAKI D-TRACKER-X, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI D Tracker, KAWASAKI AR80, KAWASAKI AR50/S, KAWASAKI AR125, HONDA TLM220R, HONDA TLM200, HONDA MTX200R/RII, HONDA MTX200R/RII
It'll last a few years.
In use with dTRACKER.
Because it is positioned as a SecondMotorcycle, the frequency of oil replacement is small, so if you buy a pack, it will last for 2 years.
Quality is not a problem.
View detail
They're cheap and they crush well.
[How is it used?
Ninja400 OIL change every time.
How was your experience with it?
It's inexpensive and it crushes well, so it has good Torque retention.
It is easy to use because it sells in bulk to some extent.
[Points to note]
Be sure to keep the specified Torque. If you tighten it by intuition, it will not be crushed enough. If you are a beginner and don't have a Torque wrenchetc., let the shop do it for you.
View detail