Reviews
Seat cover
Size is also good and could be reupholstered. View detail
The price is cheap and easy to put up.
[How is it used?
I was looking for a for re-covering skin for my SEROW250 Seat Cover, which I bought used for playing in the mountains, because it had become hard and slippery due to age-related deterioration.
I was searching Webike because I don't want to use expensive Seat fabric since I fall down every time I go out to play in the mountains, and I found a lineup of Seat fabric for SEROW250 at NTB, which sells various compatible products at low prices.
2,482 yen at time of purchase (tax included) I ordered it thinking that at this price I would be able to give up if I went out to play in the mountains and was unlucky enough to tear the Seat after a few falls.
How did you like it?
The product we received was a little thinner than the Yamaha OEM, but the fabric was thick enough. The triangular-shaped front part of the seat was sewn three-dimensionally, and the quality of the product was very good.
Remove the OEM Seat Cover, place the NTB Seat Fabric on the Seat Base, wrinkle it lightly, and secure it with a Tucker. (If you have experience with Seat reupholstery) Seat can be reupholstered in Beauty with relative ease.
It is not an OEM fabric crimp type but a sewing type fabric, Seat reupholstered." It has so much QUALITY that you would not even notice it if you did not say so.
It also seems to be durable, so as long as it is not cut by excessive protrusions or blades, it will be as durable as OEM.
Because the fabric is newer, it is naturally more flexible and less slippery while riding. If you are not sure which one to choose when reupholstering your seat, NTB is a good candidate. Normal Fit to
How did it compare to other products?
SEROW was a popular vehicle and several companies had Seat Covers on the market, but NTB's low price was overwhelmingly competitive.
Universal Product. However, it would be difficult for other manufacturers to sell a 3D sewn product for SEROW250 at this price.
[Points to note]
Since the product is three-dimensionally sewn for the car model, it is an easy job compared to Universal Product's Seat Cover. In fact, it may be more troublesome to remove the old Seat Cover, and that is how easy it was to apply this product.
First, fix the front and rear of the Seat slightly loose, and then set the Quantity:Pair (for Left and Right) When pasting the "One Side", it should be pasted along the "Seat sponge" without wrinkles so that the "One Side" will not be pulled too much.
Other items that would be helpful
The deciding factor in the purchase
As I wrote above in a scattered manner, the shape is three-dimensionally sewn for SEROW250.
On top of that, the price is low.
[How is it used?
I use it in all kinds of situations, from riding around town to playing in the mountains to touring.
Seat grip is good and very comfortable.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. and Instruction Manual for simplified application is available in Quantity:Set
No Tandem belt (because the OEM SEROW does not have Belt) 。
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
It is a very good Seat fabric and I hope to use it again next time.
If possible, even if the price is a little higher, it would be more attractive if the seat surface is black and the SIDE is silver.
View detail
The price is cheap and easy to put up.
[How is it used?
I was looking for a for re-covering skin for my SEROW250 Seat Cover, which I bought used for playing in the mountains, because it had become hard and slippery due to age-related deterioration.
I was searching Webike because I don't want to use expensive Seat fabric since I fall down every time I go out to play in the mountains, and I found a lineup of Seat fabric for SEROW250 at NTB, which sells various compatible products at low prices.
2,482 yen at time of purchase (tax included) I ordered it thinking that at this price I would be able to give up if I went out to play in the mountains and was unlucky enough to tear the Seat after a few falls.
How did you like it?
The product we received was a little thinner than the Yamaha OEM, but the fabric was thick enough. The triangular-shaped front part of the seat was sewn three-dimensionally, and the quality of the product was very good.
Remove the OEM Seat Cover, place the NTB Seat Fabric on the Seat Base, wrinkle it lightly, and secure it with a Tucker. (If you have experience with Seat reupholstery) Seat can be reupholstered in Beauty with relative ease.
It is not an OEM fabric crimp type but a sewing type fabric, Seat reupholstered." It has so much QUALITY that you would not even notice it if you did not say so.
It also seems to be durable, so as long as it is not cut by excessive protrusions or blades, it will be as durable as OEM.
Because the fabric is newer, it is naturally more flexible and less slippery while riding. If you are not sure which one to choose when reupholstering your seat, NTB is a good candidate. Normal Fit to
How did it compare to other products?
SEROW was a popular vehicle and several companies had Seat Covers on the market, but NTB's low price was overwhelmingly competitive.
Universal Product. However, it would be difficult for other manufacturers to sell a 3D sewn product for SEROW250 at this price.
[Points to note]
Since the product is three-dimensionally sewn for the car model, it is an easy job compared to Universal Product's Seat Cover. In fact, it may be more troublesome to remove the old Seat Cover, and that is how easy it was to apply this product.
First, fix the front and rear of the Seat slightly loose, and then set the Quantity:Pair (for Left and Right) When pasting the "One Side", it should be pasted along the "Seat sponge" without wrinkles so that the "One Side" will not be pulled too much.
Other items that would be helpful
The deciding factor in the purchase
As I wrote above in a scattered manner, the shape is three-dimensionally sewn for SEROW250.
On top of that, the price is low.
[How is it used?
I use it in all kinds of situations, from riding around town to playing in the mountains to touring.
Seat grip is good and very comfortable.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. and Instruction Manual for simplified application is available in Quantity:Set
No Tandem belt (because the OEM SEROW does not have Belt) 。
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
It is a very good Seat fabric and I hope to use it again next time.
If possible, even if the price is a little higher, it would be more attractive if the seat surface is black and the SIDE is silver.
View detail
If it tears, replace it immediately.
SEA BASSLETS CA4AA Purchased to replace a tear in my H30 Seat due to age.
It is inexpensive to buy, and if you see signs of tearing, you should replace the Cushion's Urethane before the rain gets to it.
Unlike OEM, there are seams everywhere. OEM is completely seamless.
If there is concern about flooding through the seams, we recommend replacing the entire unit with OEMSeat.
Some prep work is required to increase Waterproofness.
(Seams are treated with Coking from the back, wrapped with WaterproofSeat and then installed. (The last step is to wrap the seam with WaterproofSeat and apply WaterproofSpray.)
The product is folded upon arrival, so we would like time to stretch it a bit.
You may want to schedule enough time to hang the aforementioned seam Coking until it dries.
Minor wrinkles in the product will disappear as it is pulled when applied.
You may notice Large cross fold creases as shown in the photo, but they disappeared within a week of practical use.
If the actual reupholstering process is followed as described on NTB's website, even beginners can achieve a relatively good finish.
It is for beginners because it is not a one-shot game and can be redone several times.
Even without an Air Tucker, a commercially available Gun Tucker can be used for hammering if pressed firmly enough.
However, be careful with the length of the wick leg; 8mm will cause it to penetrate and prick the leg.
It was just barely 6mm foot.
View detail
Seat reupholstering of moped
The texture is almost the same as OEM. The reupholstery process was also not confusing because of the instructional video.
It's been about half a month and no sagging. 。 It is a very comfortable seat.
View detail
High quality.
The OEM Seat skin tore and I purchased this product.
The skin is a little thicker than the OEM Seat skin, but it is flexible and even a beginner could easily reupholster it.
Seat grips when driving are also fine.
I am also satisfied with the OEM look of the Large.
View detail
Even amateurs are satisfied with the results there.
This was my first attempt at Seat reupholstery for SMART DIOAF56.
In terms of work, all you have to do is to hit Staple with Tucker and fix Seat so that it does not become Wrinkle.
I also used Tucker for the first time, but it was easier than I expected because the Seat fabric matches the Seat shape and is stretchy and thin.
The finished product is now PRO grade on the front side of the Seat.
The staple on the reverse side could not be typed very neatly, but since it is an invisible part, it does not bother me that much.
Seat is made to be comfortable and soothing without any slippage.
The fabric is inexpensive and worth a try.
View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400S, YAMAHA SR400S, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500S
The result is a cheaper solution.
I bought this for Re-covering because the Seat Cover has a tear in the OEMSeat Restore.
Seat Cover only.
Since it is a product equivalent to OEM, there is no problem at all with the feeling of use. And it is a little cheaper than OEM and easy to supply, so it is very helpful.
good point
Material of Seat Cover of OEM same etc.
It also seems to be very durable.
It's easier and faster than ordering OEM.
The price is lower than OEM.
A bad point
If you don't change it by yourself, it's not necessary.
I currently have a Seat outside the car, but I originally bought it because I fell in love with the OEM look, so I'm thinking of going back to OEM when I feel like it, and I'm currently doing a little Restore on OEMParts.
As with any motorcycle, the seat cover can become worn or torn after many years of use, so it is important to maintain it frequently.
View detail
Fits: HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR)
800P return for 3876 yen. OEM is about 9500 yen.
800P return for 3876 yen. Honda OEM is about 9500 yen.
It is easy to do the seat upholstery if you have a large table, but even a 1000 yen tucker will do the job nicely.
I bought this because I dropped my OEM Seat and the outer skin was cracked.
When you think about Point, one OEM = 3 Third Party, so the cost is good.
The texture is more luxurious than OEM, and the pattern is a little different, but I just want to change the tear, so no problem.
I'm going to reupholster it now, but if it tears, I'd like to re-review it.
View detail
Fits: YAMAHA TRICITY (BirdCity), YAMAHA Tricity155
Seat for Repair reupholstery with good cost performance
I decided to reupholster it because the seam between the Seat and the Passenger was fraying and a gap was forming.
BirdCity's OEMSeat is made of fine uneven fabric in the front and smooth fabric in the back, but this one is really for repair and is made of artificial leather which is common in old style motorcycle.
The texture is not great, it's not as good as it looks from OEM, but it's better than having tears.
I tried to hit it with Hammer, but I couldn't do it well, so I pushed it in with Water pump pliers.
View detail
Fits: YAMAHA AXIS Treet (Axis Treat), YAMAHA AXIS Treet (Axis Treat), YAMAHA AXIS Treet (Axis Treat), YAMAHA AXIS Treet (Axis Treat), YAMAHA AXIS Treet (Axis Treat)
AXIS Sistreet Seat Reupholstery
The OEM Seat cover felt slippery and when it rained a little, my butt was wet. This time the NTB Seat wipes off perfectly! The replacement is a piece of cake if you have a good quality Tucker! This time I used the strong type, but you have to hold it straight or it won't stick! I was able to get the hang of it while I was doing it, so it was a piece of cake! (6mm) View detail
Fits: SUZUKI ADDRESS V125, SUZUKI ADDRESS V125, SUZUKI ADDRESS V125, SUZUKI ADDRESS V125, SUZUKI ADDRESS V125 (Address)
Reupholstering Seat
Very good. The texture is also good, different from OEM.
If you can reupholster the seat and are looking for an OEM equivalent, this is it.
View detail
Fits: SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ)
Looks may be a matter of taste.
This is the first time for me to reupholster my seat, but the dimensions are just right.
If you have a tucker, a slotted screwdriver, and pliers, you can use
I was able to reupholster it without any particular Troubles.
ZZOEM's Seat has a smooth surface skin, but
This item has a stamped outer skin, so the appearance is a matter of preference.
Also, water is going to get in through the seams (OEM doesn't have seams).
So I wrapped the inside of Urethane before installing it.
The inner Urethane was ripped off and the ripped part was lost.
It's better in the long run to replace it as soon as possible.
I thought it would be cheap to look at.
View detail
Fits: SUZUKI Volty typeC, SUZUKI Volty typeC, SUZUKI Volty typeI, SUZUKI Volty typeI, SUZUKI Volty typeI (VOLTY Type1), SUZUKI Volty typeI (VOLTY Type1), SUZUKI Volty typeT, SUZUKI Volty typeT
Good quality for the price!
Cost performance is good.
The shape of the seat cover has less Gap to Seat, so it was easy to install.
It would have been better if it was available in a VOLTYOEM color other than Black.
View detail
Fits: HONDA VTR, HONDA VTR, HONDA VTR, HONDA VTR, HONDA VTR
To counteract the hardness of the VTR250Seat
Replaced in April 2018 to counteract the Seat due to the hardness of the OEMSeat (GRONDEMENT's Emboss) But it's been 2 years without improvement, so I had to go back to NTB's again I bought this in order to put the seat cover on top of it This time I used a 100-yen spherical non-slip Seat on the Emboss Seat "Snappy Matte The feeling of Seat is the same as that of the previous Seat (Photo 2) It seems to have more thickness and elasticity The fabric is a little tighter and I was able to tighten it up without having to worry about its positioning This is easier to change if you get used to it It had to be reworked because the installation boss holes are 20mm longer than OEM (Photo 3) This is just to re-create the holes, so no problem With the thickness and elasticity of the seat, the pain in the buttocks is better than before It seems to be a problem The purpose of this project was to improve the feel of the Seat by overlapping, but it was just to replace the old Seat I would recommend it, if only to be reupholstered As far as the product is concerned, I used to use the expensive GRONDEMENT, but if you just want to reupholster it, you can get a cheaper one I think NTB is a quality product The price is half of what I paid for them, and I trusted them because I used to use their Seat for MD50 View detail
Fits: HONDA VTR, HONDA VTR, HONDA VTR, HONDA VTR, HONDA VTR
No particular complaints
Second Seat cover re-covering
Tucker is purchased at 100 yen
Last time I bought and installed a Cover for about 8000 and I didn't notice any difference
If I had to guess, I'd say the fabric is a little less strong when pulling the fabric That's about it
It turned out beautifully
The Stitch? was easy to hit and center because of the Stitch?
I'm not sure how long it will last, but for this price, I'd be happy to reupholster it again It is
View detail
Fits: HONDA CB400SS, HONDA CB400SS, HONDA CB400SS, HONDA CB400SS, HONDA CB400SS, HONDA CB400SS
This is not an OEM part
The photograph shows the correct Honda part. The seat cover supplied is a substitute which does not match the original part. The web page is misleading. If you want a seat cover that matches the original this is not the one. I have awarded one star as there is no option to award a lower rating which this deserves. View detail
Fits: YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200E, YAMAHA TW225
good
TW125/200's OEMSeat cured
There was a crack in the corner of the seat
I reupholstered it with NTBSeat cover
The reupholstery process is easy to work with because of the exclusive design
Seat Surface is a non-slip Texturing style fabric
Individual differences, I suppose
R sewing is Quantity:Pair (for Left and Right) There is a little Gap in …
is only tolerable …
The seat skin is a little thin, but it's easier to work with as a result
Soft and comfortable. Belt included
For more exclusive design with UniversalSeat skin
It's hard to wrinkle and hard to fail
View detail
Fits: SUZUKI ADDRESS 110 (Address), SUZUKI ADDRESS 110 (Address), SUZUKI ADDRESS 110 (Address)
Constriction of the seat.
The product is of very good quality, odorless and fits in size, pleasant to the touch, stretches well. Everything is very well stitched, the seams are high quality and do not tread, you can clearly see in the photo. The product is very good quality, odorless and suitable in size, pleasant to the touch, stretches well. Everything is very good stitch, seams are high quality and do not trample, the photo is clearly visible. translated by Google Translator View detail
Fits: HONDA LEAD125 (LEAD), HONDA LEAD125 (LEAD), HONDA LEAD125
We can't install it
I bought it to prevent scratches on the Seat since I bought a new car
I thought it was a cover type cover, but the product I received was a single piece of cloth for It was Repair fabric
i didn't see the label "for Re-covering" anywhere, so I bought it by mistake Sheesh
The seat cover is still necessary, so I looked for the same product on Amazon again later The Air Tucker (sold separately) is required to install this product rdquo; it said
It also says, after the name of the product, “For re-covering&rdquo It was
I think the product itself is great for Owners looking to repair scratches, but I think the product description is insincere
View detail