Reviews
Balance is good!
I found this product because I wanted to refresh the Tandem Footpeg when it was removed. I have no experience with circuits at the moment, so it is just for looks, but it can be used with KIJIMA's helmet holder as well, so I like the way it fits together very nicely. View detail
BABYFACERacing hook is the best!
It is one of the ITEMS you must use when you buy a Motorcycle!
Personally, it is as much an iron plate part as the Exhaust System replacement.
The body of the car looks tighter and the color can be matched with the Rear Sets of the same Manufacturer, so that the Rear Sets and Quantity can be matched every time.:It is attached with Set.
This time cbr600rr (2bl-pc40) I installed it with a-tech's Rear brake tank guard and both were great.
View detail
Changed from the same Parts (Black)
[How is it used?
Used for dress-up and in-vehicle use
Was the one you received as per Image?
Street Image
Was the installation difficult?
Easy installation BoltQuantity:2pcs only (for those who have removed Tandem Footpeg)
How was your experience with it?
It has more dress-up elements than practical use, but it is good for one point.
[Included Parts:were they on?
BoltQuantity:2pc
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation Point or hang For those who have removed the Tandem Footpeg/No Instruction Manual/Ease of understanding ◎/Cautions None/Items to be purchased together None/Opinions and requests to the Manufacturer I want Silver anodized color, please!
View detail
Opposite side of Silencer bracket
Since the Tandem Footpeg to which the Silencer was attached was replaced with a Bracket, it was decided to remove the opposite footpeg for balance.
Also, Rear Sets were recently changed to Babyface LargeHanGold, so the same color is used for this product.
Installation is not a lost cause.
Of course, Tie Down austerity seems to be bearable.
View detail
Lightweight and Dressup
I installed the footpeg for the purpose of dressup after the removal of the footpeg, but unfortunately, I could not see the engraving, which is the most important part.
Other than that, I have no complaints.
View detail
To hide the Tandem Footpeg when it is removed (installed on a '24 model).
When we purchased a '24 ZX-6R, we decided to install a single seat cover and remove the tandem footpeg to give it a race ish look and feel. The Left SideTandem FootpegBracket was installed to cover the bolt holes after the removal of the bracket.
Since we don't run circuits with the Transporter, we plan to use it as a Hook to secure the Belt when wearing the SeatBack, which looks and feels Large.
No conformity to the 24 MODEL is available, but we were able to install it without any problems.
It can also be used in combination with a helmet holder.
View detail
Functional without sacrificing appearance
Purchased for blindfold after removing Tandem Footpeg
It will also come in handy when loading the Transporter.
View detail
Tandem Footpeg was in the way.
[How is it used?
The Tandem Footpeg was removed because it often interfered with the heel of the shoe and felt in the way.
Installed because it would not be possible to secure the cargo rack or Tie DownHook if it was left removed.
Was the one you received as per Image?
The texture is good. The area is BabyfaceQuality.
Was the installation difficult?
It is very easy to remove the footpeg and squeeze it with the supplied Bolt.
The Helmet holder can be installed with it attached or removed, of course.
The Bolt that came with it was not particularly accurate or anything.
How was your experience with it?
Anodized fallout is possible due to some slippage, but it is not a problem for functionality.
View detail
AnchorPoint
The Tandem Footpeg was removed and installed since it is often mounted in the vehicle.
I am using it with KIJIMA's helmet holder, but I think I can manage to hang the belt on it.
The instruction manual says to use it only as an aid to deform it if it is pulled or tugged hard, which is not a problem because it is aluminum.
Dress-up parts.
The strength will be verified by using it in the future.
View detail
mc51 Racing hook
I bought it because I go to Circuit a lot and often have to Transporter, so I realized that I don't have many Points to put Tie DownHook on.
I recommend this product because the texture and rigidity are very good, beautifully anodized and easy to use.
I think it will be more useful for those who often go to Circuit than those who do city driving or Touring.
View detail
Great accessory even not going to track
Even though i dont go to race tracks or have weekend circuit day, but since i am a single rider and removed the footpeg, this hook is a great accessory to put in place of the removed footpeg. the black color is cool and sleek! View detail
Elaborate shape
It is just a Plate, but it has an elaborate shape with chamfers and cutting.
It is rigid and stable.
Minus point is that Helmet lock can no longer be installed.
View detail
Good for dress-up
Installation is done by screwing Screws to Quantity:I bought it as a dress-up. View detail
Convenient for Tie Down use
Purchased because there was no place to hang Tie Downs.
I installed it.
The color is Black.
You can choose the color of your choice.
It took a long time to deliver, so if you want one, get it soon!
It is strong enough to secure it to the Transporter.
As a side note, since it is a race base car, the Left Side has an Initial Adjuster.
The "M" is attached, so it cannot be used.
Product is Quantity:Pair (for Left and Right) minutes, it's in there.
View detail
The body of the car has been tightened.
CBR600RR (PC40) attached to the
Silver color stands out on Tandem Footpeg until now.
The black color has made the body of the car itself more attractive.
I was happy with the feeling.
View detail
Race ish now!
I purchased this for my CBR600RR (PC40).
I didn't want the Silver color of the Tandem Footpeg to stand out.
The black color was used to create a sense of unity with the car body.
It was good that the car body looked tighter.
View detail
Babyface Hook
Just remove the Tandem Footpeg and replace it with the Hook, and it's Race ish looking perfect! I am very satisfied! I was also happy to be able to attach the helmet lock to the KIJIMA No, which I was worried about. View detail
Good as one point
The Gold is beautiful as one point.
It is also a perfect match with BABYFACE's Helmet lock. It is a useful Goods when you have it.
View detail
Parenthesis goodness and functionality!
I removed the Tandem Footpeg and installed it.
Easy to fix on a loaded car and looks great Parenthesis!
View detail
I think it's less likely to be used for its intended purpose…
[How is it used?
Tandem Footpeg removal Bolt hole concealment.
Originally intended to be used for in-vehicle fixation, etc., the Situation
The purpose is almost exclusively for dress-up as it is thought that there are not so many
Was the one you received as per Image?
As per Image. BabyFaceLogo was on the back.
Was the installation difficult?
No difficulty. Just screw it in.
How was your experience with it?
Small and unobtrusive, but usable for its original purpose.
I think
[Included Parts:were they on?
Mounting Bolt?2
[Was there anything that disappointed you?
As mentioned in other reviews, the bolt is too short.
It is too big to be used. Prepare a long one.
Other items that would be helpful
Installation Point or hang The accuracy is so good that hang is not needed. /Instruction Manual Yes, clarity ○○/Points to note Included Bolt is short /Items to buy together Opinions and requests for M8 Bolt/Manufacturer longer than included I wish it was available in Silver anodized or Titaniumium alumite.
View detail