Reviews
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Used on the outside Cover
The Motorcycle Cover is used in two layers and is used on the outside.
It is water-repellent and waterproof, so even bird droppings and pollen can be washed off.
I am not concerned about the flapping that other users have pointed out, as it seems to be sized just right by the Cover used inside.
It is durable enough to be replaced in two years.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Easy-to-use Motorcycle Cover
It is smooth and easy to use. It is just a little disappointing that there is no aperture so it is easy to get wound up. I think Y's Gear might be better in that area. View detail
Fits: HONDA GORILLA, HONDA MONKEY, SUZUKI CHOINORI SS
On the KSR80.
[How is it used?
KSR80 was delivered and used for storage.
Was the one you received as per Image?
I used it on a different Motorcycle so I imagine.
How was your experience with it?
I had used it on a different Motorcycle and found it easy to use, so I decided to use it on the KSR as well.
[Points to note]
The size was just right for KSR. If it is a little bit larger, the lower end of the tire will be too large.
How did it compare to other products?
Better than the StandardMotorcycle Cover of 2 Rinkan.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Pretty good
It is not too flimsy and seems to be reasonably durable.
There are holes in the front and back for a chain lock and a belt stopper underneath,
I think the cospa is one of the better ones.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Slightly Larger
I bought this product because the Motorcycle Cover I bought at 2 Rinkan had a small hole in it due to deterioration within a year. It is completely outdoors without a roof. The environment is harsh because it is exposed to the wind.
I put this product on xr as it is, but it is a little Large size. It is a little too large. The total length is 220, so it is between L and LL.
The flapping and scratching were a concern, so I doubled up the Motorcycle Cover I had been using and put it on the bottom, which made things a little better.
The quality and functionality are good, and the price is reasonable, so if it lasts a year, it's good enough.
View detail
Fits: HONDA ShMODE, HONDA APE50, HONDA APE100, HONDA CUB, HONDA glom, HONDA ZOOMER, HONDA DIO110, HONDA BENLY50 PRO, HONDA BENLY50, HONDA BENLY50110 PRO, HONDA BENLY50110, KAWASAKI KSR All models, KAWASAKI Z125 PRO, SUZUKI K50, SUZUKI Address V100, SUZUKI Address V50, SUZUKI COLLEDA SPORT, SUZUKI Birdie 50, SUZUKI Birdie 90, Vespa PX150
Normal good
[How is it used?
Used for groms
Was the one you received as per Image?
Street Image
How was your experience with it?
The holes for the locks are different colors for the front and back, so it is easy to tell the front and back when putting on.
[Points to note]
nothing special
How did it compare to other products?
I bought the same one because the one I had been using was torn.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: HONDA CB223 S, HONDA AX-1, HONDA CL72, HONDA CRF125 F, HONDA CRF150 R II, HONDA CRF150 R, HONDA FTR, HONDA SL230, HONDA XR230, KAWASAKI 250TR, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER125, KAWASAKI KLX110 L, KAWASAKI KLX125, KAWASAKI KX100, KAWASAKI KX65, KAWASAKI KX85 II, KAWASAKI KX85, KAWASAKI SUPER SHERPA, KTM 125 DUKE
article of satisfaction
I bought it for MC19 for CBR250R.
Material is good, size was right.
Same as OEM Product, nothing to complain about.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
It is a little Large size.
It's a Large tightening for the Ninja 400cc. View detail
Fits: YAMAHA YZF-R3, YAMAHA NMAX155, YAMAHA MT03, HONDA CB500F, APRILIA RS250, APRILIA RS125, APRILIA RS50, DUCATI 899 Panigale, HONDA CB250 F, HONDA CB400 F, HONDA CB400 SB, HONDA CB400 SF, HONDA CBR125 R, HONDA CBR250 R, HONDA CBR400 R, HONDA CBR500 R, HONDA CBR600 RR, HONDA NSR250 R, HONDA PCX150, HONDA VTR F
As expected
I have used various covers (DAYTONA, Home center, fireproof, etc...). I have used various covers (DAYTONA, Home center, fireproof, etc...).
Although there is a slight difference in the length of time it can be used, even this slightly more expensive product will still tear in front of a Blue Sky parking lot.
Is it a Material issue as the fabric tears, not the sewing. Used for about 2 years.
However, the holes for the locks were easy to identify with different colors in the front and back, and the Belt in the Center was easy to use.
I think this product can be recommended for use in the shade or under a roof.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Used as the outermost Cover of a 2-ply
L L size is just right.
The quality is fine and I would choose this product again next time.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Motorcycle Cover
I often buy this Cover because the product seems very durable and good.
I wish it was a little more waterproof. I like the product.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Wind and dust proof OK!
The cover has a belt stopper, so it does not roll up even in strong winds. If the Motorcycle is not equipped with the RearTop box, the excess Cover of the RearTop box part will sway in the wind. View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
GSX-S1000 2017 as a Cover
We park outdoors uncovered, so the Cover is doubled up.
I chose this product to replace the second layer with a cheaper Cover for the first layer.
I have a Motorcycle with Visor and Club bar installed and the size LL is just right for me as it completely hides the Tire.
There are holes on the front and back for inserting lock wires, etc. The front is yellow and the back is black, so it is easy to distinguish when hanging covers.
There are also vents, which may help prevent moisture and entraining winds.
The fabric also feels firm.
There is also a Belt in the Center, but it does not prevent flapping. This is the same for all Covers. It is better to use separate belts at the front, rear, and center to prevent slamming. You can buy three 2-meter long belts at Home center for about 1,000 yen.
I think I will REPEAT it when it deteriorates and the opportunity to replace it presents itself.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Tough Cover
This is an excellent motorcycle cover. Very durable material which is at least twice the thickness of any other I have seen. Plus with the added holes for putting a chain through the wheels. Highly recommend. View detail
Fits: YAMAHA WR250 X, YAMAHA WR250 R, SUZUKI DJEBEL250 XC, SUZUKI GRASS TRACKER BIGBOY, SUZUKI DRZ400 SM, SUZUKI DRZ400 S, SUZUKI DRZ400 E, SUZUKI DRZ400, KTM 690 DUKE, KTM 250 EXC, KAWASAKI KX450 F, KAWASAKI KX250 F, KAWASAKI KX250, KAWASAKI KLX250, HONDA XR250MOTARD, HONDA XR250 BAJA, HONDA XR250, HONDA CRM250 R, HONDA CRM250 AR, HONDA CRF450 R
HIRAYAMA:Motorcycle Cover Kizuna Off-road LL
I bought the SizeLL, and I always mount the Top case of GIVI B27N in SEROW250FE. In this condition, the front wheel of Cover touches the ground, and the rear wheel lifts off the ground about 20 degrees. If I remove the GIVI B27N, the rear wheels will be too much on the ground. I am very happy with it. View detail
Fits: YAMAHA YZF-R3, YAMAHA NMAX155, YAMAHA MT03, HONDA CB500F, APRILIA RS250, APRILIA RS125, APRILIA RS50, DUCATI 899 Panigale, HONDA CB250 F, HONDA CB400 F, HONDA CB400 SB, HONDA CB400 SF, HONDA CBR125 R, HONDA CBR250 R, HONDA CBR400 R, HONDA CBR500 R, HONDA CBR600 RR, HONDA NSR250 R, HONDA PCX150, HONDA VTR F
I was hoping it would last two years.
Motorcycle seat, price is PinDrill.
No matter how expensive Seat is you buy, it has a useful life.
I've been replacing Seats about this product for about 3 years.
I'm generally satisfied with Seat.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
It's a thick Cover and it's solid.
Used on VFR800(1999). There is no sticking point and the Size is just right.
It's thick and has a good texture, and it's a little expensive, but I'm satisfied.
The holes for the lock are colored differently in the front and back, which is convenient for hanging the Cover without mistaking the front and back.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
I'm worried about the slippery slope.
[How is it used?
I used it on my XSR700.
The LL was just right with no Back or Box on it.
If you have a Box, I think it's better to have a Box.
Was the one you received as per Image?
I wanted an aperture at the hem.
It has Rubber in it to prevent flapping, but the Rubber is only in the Tire part, so you can't squeeze it all the way.
I'd like to see a cord around the whole thing, and if it could be squeezed, it would prevent it from flapping around more.
How was your experience with it?
It seems to have the minimum functions of Motorcycle Cover.
I think the fabric is good because it is solid.
Also, the seam doesn't go up, so it's not likely to leak water droplets.
Durability is unknown.
There are holes in the front and rear for the motorcycle locks.
[Points to note]
None in particular.
How did it compare to other products?
Although the top MODEL was scratch prevention in the back hair over 2 man of Hirayama Sangyo
This is not becoming.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: HONDA DUNK, HONDA Giorno, HONDA TACT, HONDA TODAY, HONDA DIO, SUZUKI GS50, SUZUKI Let's All cars, SUZUKI ZZ (ZZ), SUZUKI STREET MAGIC, YAMAHA JOG, YAMAHA VINO
bond of trust
Every time I bought a cheap Motorcycle Cover, it deteriorated and avoided chattering after six months of purchase, so I chose this Cover with a little higher Gold amount.
The subject is Honda TODAY (with Rear box) that I usually use for commuting. The size that I chose this time was probably just right for the setting without the box, so
If it comes with a box, I think it is better to choose One size up. The fabric is very firm and thicker than the cheap ones.
I haven't used it for a long time, so I don't know what will happen in the future, but it looks promising. In order not to become the loss of money of a cheap thing purchase, I recommend the thing of the manufacturer which Cover is also solid to some extent.
View detail
Fits: HONDA DUNK, HONDA Giorno, HONDA TACT, HONDA TODAY, HONDA DIO, SUZUKI GS50, SUZUKI Let's All cars, SUZUKI ZZ (ZZ), SUZUKI STREET MAGIC, YAMAHA JOG, YAMAHA VINO
Motorcycle Covers are pricey too!
I would like to buy and use a certain cheap motorcycle cover listed on Webike.
As early as six months or so, it ripped apart and I had to discard it.
I bought this one in order to select a decent one.
The fabric itself is almost as if the thickness and texture of the fabric itself is different and somehow seems to hold up.
It is a form which stops the lower part of the cover with buckle, but it was worried about the string being difficult to tie, but as for others there is no problem.
View detail