Reviews
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB400SF, HONDA CBR1100XX, HONDA CBR250R, HONDA CBR250RR, HONDA CBR900RR, HONDA VFR400, HONDA VTR1000SP, SUZUKI GSX250R, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR929RRFire blade, HONDA NSR250R, HONDA RVF400, HONDA RVF750, HONDA VFR800, HONDA VTR250, HONDA HORNET250, HONDA HORNET900
I am quite satisfied.
It was a product that fits my halfway preference of wanting to replace the humble OEM footpeg but not wanting Rear Sets….
Installation is easy, but on mine, only the Left Side interferes with Shift, so I had to remove the Shift Pedal before installing it.
Look again after installation. 'Shorter than OEM…? 'Narrow foot placement might tire you out over long distances.' I thought so, but 200km non-stop is no problem.
In fact, it was easier to ride in than OEM because the shoes were less slippery.
I am glad I changed it.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA XJR1300, YAMAHA MT-09 Tracer, YAMAHA MT-09 A, YAMAHA MT-09, YAMAHA MT-03, YAMAHA MT-25
Good looking and practical!
I replaced it with Heel plate. The texture is very nice and tight, and I plan to paint the Silver OEM Footpeg Holder in Blue metallic. I am looking forward to the finished product. View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB400SF, HONDA CBR1100XX, HONDA CBR250R, HONDA CBR250RR, HONDA CBR900RR, HONDA VFR400, HONDA VTR1000SP, SUZUKI GSX250R, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR929RRFire blade, HONDA NSR250R, HONDA RVF400, HONDA RVF750, HONDA VFR800, HONDA VTR250, HONDA HORNET250, HONDA HORNET900
It's functional beauty!
CBR250R (MC41Second Type Model) I put it on the
Installation is very easy
Just remove the Split Pin with a radio pen or something, remove the rod that is the center of rotation, and do the opposite when you put it on.
The effect is that I feel a little better than OEM. I think it is because I am not able to put the load on the footpeg well. The slipperiness is better than OEM by far.
I was worried about the vibration, but when I focused my nerves on my legs, I could feel the vibration at the Level.
There's nothing to worry about at all.
I went with Gold and it looks so much cooler! It is truly a functional beauty.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA XJR1300, YAMAHA MT-09 Tracer, YAMAHA MT-09 A, YAMAHA MT-09, YAMAHA MT-03, YAMAHA MT-25
It is a very good product if you can close your eyes on price.
【What made you decide the purchase?】
Because Normal step was not tasty, purchased for Dress-up purpose.
【How was it actually used?】
I bought it for Dress-up purpose, but the quality is very good.
Moreover, because Knurl processing is being applied, I think that it is hard to slip and it is well done as a custom part.
This product is slightly shorter than OEM. (I posted a picture. )
By the way, my foot size is 28 cm, but when I put my legs on it, it will not be unstable, and there was no effect on operability at all.
However, although it may be said to be general to these products, I think that it is better to pay attention because the hem of Pants and others get caught in the cut part because it is cutting.
【Was it difficult to install? (Hard parts case)】
The installation itself is easy, but to some extent a tool is needed to remove the OEMFootpeg Bar.
Since the axis fixing the footpeg is stopped by Pin, it is necessary to pull out the bent Pin straight. (See photo)
Also, at the time of installation, it is necessary to bend Pin in the same way to prevent it from coming off.
Pin was so hard that I think it would be easier to work not only with Radio pliers, but with ordinary Pliers.
【Please tell me the point of installation and hang (in the case of Hard parts)】
There is nothing especially with hang, but as a tool, Radio pliers - If you have a tool such as Pliers that is thin at the tip and easy to bask in force, I think work is necessary.
Also, positionally the Exhaust System is close, so do not forget the curing of the Exhaust System!
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
Because of Hard parts, none.
[Is there anything I was disappointed about?]
Nothing in particular.
I think that it is a well-made product.
【Hope for Manufacturer - Please let me know if you have any improvement points]
The price is expensive.
For example, if you set three of the same POSH SetPlate + Heel Guard + this product, that alone is about 25,000 yen. You can reach the Manufacturer's Footpeg Kit at about + 20,000 yen.
Texture - Both accuracy are very good, but considering the price side a bit more "Let's change it" Personally I thought that more people would increase.
【Have you compared items?】
Nothing in particular.
[Others]
Nothing in particular.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA XJR1300, YAMAHA MT-09 Tracer, YAMAHA MT-09 A, YAMAHA MT-09, YAMAHA MT-03, YAMAHA MT-25
Is good
Anodized is also beautiful and accuracy is satisfying well.
It is slightly shorter than Normal step. Because Knurl processing is working well, I will not slip.
It is never too thick and there is no chance of Shift or Brake being hard to do.
View detail