OEM footpeg is moved to the back of the large footpeg, ideal for circuit use.

[How is it used?
I think this is the best way to enjoy inexpensive Sports driving in Circuit with OEMfootpeg.
Was the one you received as per Image?
Installation is done with a simple push-on, Then footpeg did not interfere with the road surface.
(Knee Slider removed)
How was your experience with it?
I experienced a slip-down fall, but it did not affect the Plate at all, and the sturdiness of the construction is a feat of engineering.
[Points to note]
The position may feel a little tight in city driving, but it depends on how you ride.
How did it compare to other products?
It is a reliable Brand that you can trust. View detail

To improve the operability

It was installed to improve the Position and operability of Ninja250SL.

I think that the rubber mount fixes the squishy mounting part and eliminates the uncomfortable feeling when the load is applied, and the position of the footpeg is just about right without being too tight.

If you use the NORMAL with Rubberfootpeg, the angle of the footpeg changes and the Shift Pedal feels a little stiff.

The Link Rod that came with the Ninja 250 had a limit on clearance with the frame, so I decided to use the Ninja 250 OEM Parts. (39110-0307) I installed it by diversion. View detail

Easy to install

Installation was easy

I chose the 1st Up Position of the 3-position, and I have no problem and do not get tired in city driving.
Personally, I'd be happy if there was more Up Position.

If it was a little cheaper, I wouldn't have complained, because when I say it's just a Plate with holes drilled in it, it is. View detail

I think the rating of this product depends on the mounting part of the Frame.

As for the product, both the texture and the function can be satisfied enough by the product of Babyface as expected.
Also, I chose the Large displacement, but I was satisfied with the position.
Regarding the overall satisfaction and the title, on our GSX-R125, the mounting bracket on the frame side was welded in a slightly distorted state, and when it was installed, the head of the Change Pedal fixing bolt interfered with the rear hugger, which inhibited the movement of the suspension.
The Tie rod also rubbed against the Frame cover, so I am not using it now.
The same may be true for other footpegs and Rear Sets, but if you don't have the above problem, you will be very satisfied with this product. View detail

Cosmetically sound

I installed it on my GSX R125
This is a type that appropriates the OEMfootpeg

[Color] Silver

[Footpeg Position]
37.5mmBack/45mmUp
52.5mmBack/60mmUp

【attachment】
pimping
I felt that the included ROD could use a little more length

[Feeling of use]
Sporty position, comfortable to drive

【Cost performance】
You can easily change the position

Recommended
If you're looking for a pontoon, or cosmetic, I recommend it View detail

When I want to change the position cheaply

I was considering Rear Sets to run Circuit, but I chose this product without money..



I thought that installation was easy with just putting Plate in between, replacing the RubberColor of the mounting part of the OEMfootpeg with the attached Aluminum Collar or removing the Bracket's Rubber rubber which is out of the Frame from the footpeg back to the Spring? I adjusted it so that it will not get caught, it took a bit of trouble.



The feeling I used can be ridden without any cramped feet. It also looks NORMAL, so it is recommended for those who want casually. View detail

Cheap remodel

We modified footpeg with Back plate this time.
Cheap and good looking, functionality is also improved !!
Position position can also be changed variously, so it is highly recommended.
Please also try
I am very satisfied !! View detail

Since the Brake-pedal position of a NORMAL is high, if there is a mounting hole made to anteversion, in addition, it is good. Although the Shift rod will add and extend a Parts to a Normal parts, I consider it as it is better for what was made

Since the Brake-pedal position of a NORMAL is high, if there is a mounting hole made to anteversion, in addition, it is good. Although the
Shift rod will add and extend a Parts to a Normal parts, I consider it as it is better for what was made in one to stick. Since it was conspicuous too much when attached with the pure Bolt of the Silver, the Bolt of M8 of the Black was purchased.
accuracy is good, suits the Body color, and is pleasing. View detail