Reviews
The smallest possible protection without compromising appearance
You won't know performance until you mock it up. View detail
Fitted on a 2023 Honda CBR250RR
It is also available for the 2023 model year.
I am very satisfied with the beautiful finish of the Large size change in Aluminum Cut-out.
Aluminum Collar for installation is attached, but there are two sizes, 10mm and 12mm diameter. 12mm diameter can hide the scratches on the crankcase bolt hole when the OEMBolt is removed, but 10mm diameter can show the scratches a little. However, the 10mm diameter Bolt is slightly scratched.
I would have liked them all to be 12mm diameter colors if possible.
In my case, I inserted a commercially available 12mm Washer so that the scratches would not be visible.
View detail
New Engine Slader.
The car was originally installed, but after the New Year's holiday, I had an icy road accident on my first ride and damaged various parts of the car.
After all, with and without the Slider, it looks better and feels safer in the event of a fall.
However, in this fall accident, I slipped and hit a GuardRail pillar with such force that everything was broken. We managed to finish the repairs, but it was a painful Large expense.
View detail
I decided to go with this one because of the reputation of the people around me.
Slider, which is indispensable for Gymkhana, for Z125PRO is being sold by several FOR JAPAN MODELManufacturers, but I was torn between this Babyface product and another company's product, but I avoided direct connection to the frame and used a slider that is not directly connected to the frame, and instead used a slider made by another company. Surprisingly good rigidity balance and SMART." The decision was made with the voice of the audience.
However, after placing the order, it took a bit of time to deliver the product and finally install it.
Unlike Frame direct connection, Quantity:Pair (for Left and Right) The installation work is a bit tricky because it uses a part of the bolt position of the clutch cover and the alternator cover of the "M".
First of all, the instruction manual recommends using STAND and setting the car body vertically before starting work.
The instruction manual is the smallest, but I was able to work with the picture and exploded view.:Pair (for Left and Right) Follow the Manual as you play with the Cover.
The work itself was not so Large strange, but it took about 1 hour from my own obsession work, and if I followed the instruction manual, the work would have taken about 30 minutes.
The left 4 and right 3 mounting bolts were replaced with the supplied hexagon socket cap bolts, and a small amount of liquid gasket was applied to these 7 bolts. (Instruction manual recommended)
In reality, it is a stumbling block that emphasizes basic performance to protect the lower body and car body in case of emergency, and to protect the car body by protecting it and damaging it.
View detail
Fallen cannibals
Babyface is reliable and well designed.
No problems with installation.
View detail
The texture is good
The best part is that you never have to check the effects.
I wanted to add a secondary cover, but in order to install the Rear Sets, I had to use the
I chose this product because I could not install the secondary Cover.
The rear sets are black, so I thought it would be better if they were black.
View detail
Quality is high
The best part is that you never have to check the effects.
I wanted to add a secondary cover, but in order to install the Rear Sets, I had to use the
I chose this product because I could not install the secondary Cover.
The rear sets are black, so I thought it would be better if they were black.
View detail
Just to be safe.
I was worried that the delivery time would be long, two and a half months.
The Instruction Manual was not written in detail, so I thought it would be safest to have a mechanic install it.
View detail
There are some things that bother me about it:・・・・
AGUSTA, but for the F4 series.
Because Protection around Engine is weak.
(Especially Right Side)
In order to keep the damage to the standing moss to a minimum.
I thought it was essential.
I know Design is a matter of taste, but
With so few mounting surfaces.
I think it's well thought out and...
As for the price, given the number of units sold.
Isn't it neat?
I haven't tried it yet, but...
Now that it's installed, I feel more secure.
But the Spanner latch is not hexagonal.
It's a two-sided pull.
Spanner doesn't fit in some angles.
I would also like to have an OilGasket.
Therefore, from for Left Side
I thought the difficulty level was high.
View detail
Reliable Brand
There are few MVAGUSTA-type Parts, but they are SliderLineup on Babyface.
Engine sliderQuantity:Pair (for Left and Right) BabyFires products are on the market.
The design is not very good, but it seems to have a high Protection effect.
Run not to use it.
View detail
For standing up
The Frame Slider is also a Babyface, so I'll get the Engine Slider here as well choice
Stalling and dress-up purposes
Easy to install
Just remove four bolts and attach them
This Slider is only available on the Right, so I'm not sure if it's mossy on the Left
i wanted for Left too …
View detail
countermeasure against standing up
Installed on a BMW S1000R 2014
countermeasure against standing up
I don't want to try to use it (Lol)
It's a bit pricey
View detail
I am satisfied with the accuracy and appearance of the product ..
This is probably due to the design of the Frame, but the quantity:Pair (for Left and Right) It is not a Penetrating type, so there is some concern about its strength in case of a fall
If it's just a standing mock-up, you'll probably only need to use SliderBody's Damage, but if you're driving If it falls over, there is a possibility that it will break from the Bolt's thinness
However, I chose this product because of its SMART look when installed
View detail
Thank you very much
Thank you very much. It is a good product at a good price and fits well when fitted. The delivery period has been long and long for various reasons, but the product itself is good. thank you very much. It is a good product with a good price, and fits well if you try fitting. Although the delivery period has increased a lot for various reasons, the product itself is good. Thank you very much. . translated by Google Translator View detail
Let it fall over & hellip;
The Frame Slider is out of stock and it will take 2 months to order it Buy this product as
I installed it on a Ninja250 18 year model
The quality and strength are as good as you'd expect from babyface, no complaints!
Also, Design is cool!
However, as with the company's other products, the Instruction Manual is not friendly and constrictive Torque value is not listed
I've looked at some of the information on Net and other sources and tightened it up with 55N, but I'm not sure if it's right
Note that you need to remove the cowl of the One Side when you install it (First image)
well
I'm sure you've all been wondering about the effects of the fall
I fell on a downhill UTurn about two weeks after installation
As a result, there are 5 scratches on the top 3 parts of the side cowl, the fin and the tail right underneath
However, near the Engine, the lower part of the Cowl was completely intact, so the Crankcase and Under I thought it was the best way to protect Cowl
Was it because you fell on the downward side and fell with great force?
After a short time, I put the Veneer board from Tire to Slider at home with the body upright We've tried to recreate the fall situation by guessing, but it didn't hit the Cowl
Maybe it wouldn't have hurt if it was on flat ground
However "Engine slider is
Just in case you want to protect your cowl, purchase a Frame Slider for the purpose of protecting your cowl I recommend it
View detail
The EngineOil Filler Cap doesn't work!
The texture and sense of security are as expected of BabyFace For installation, it is better to remove part of the cowl It is not in the product description, but as shown in the product photo, the EngineOil Filler Cap You need to replace it with a shorter type because the EngineOil Filler Cap will not open if it is OEM Note that if the EngineOil Filler Cap is OEM, it won't open Please! I didn't realize it until after I installed everything View detail
As Protection ? ? ?
I think that it is more securely guarded who install Cover system obediently.
On my own terms, I think that this crescent-shaped Bracket is giving a sense of Custom.
Large as well Size I do not come out so complaints. I am self satisfied..
View detail
Clumsy person installs hard work!
If you are clumsy please note that there are possibilities for parts that you have to tighten together when inserting Bolt when installing ...
Other than that it's a very nice item.
It will be Dress-up and BABYFACE's Logo is cool!
I think that it will play a role as an engine guard firmly!
(I have never gone to not having a turn)
View detail
Design is ○
Design and Cost decide to purchase like.
Bolt head on the generator side was dissatisfied with protruding.
There is no play, so it stops firmly, so it is shallow counterbore?
View detail
Is not it good?
It's a Slider so it's not good nor bad.
It is certain that it is in the way.
Installation is simple.
Easy to remove.
The color is Black..
View detail