Reviews
K-factory radiator core guard
Now if there is a difference in width size of the radiators I had to re-drill the holes on the side brackets by about 5mm each side then the cover slotted over nice and tight so expect there could be some adjustment needed View detail
Fits: KAWASAKI NINJA ZX-14R, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400
Reliable KFACTORY
I had already installed KFACTORY on my other car, so I was comfortable with the purchase!
It was installed by simply removing the Lower cowl.
The middle of the 1stSmall stone is rolled up in a fine mesh, making it very effective in preventing stones.
I can go Touring with peace of mind!
View detail
Fits: HONDA CB400SF VTEC, HONDA CB400SF Revo, HONDA CB400SF Revo
Kay FACTORYRadiator guard
The letters "Kay FACTORY" are well-designed, and the large size is more protective than the NORMAL. View detail
Fits: HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR
PeLePera feeling
[How is it used?
Looks good but peLePera-like.
Was the one you received as per Image?
Yes, I have. I just want it to feel a little more rigid or solid.
Was the installation difficult?
Easy
How was your experience with it?
PeLePera-like
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
K-FACTORY radiator (water tank) guard
It is very good, it very fit to the bike to make it be smart and the shipping is good too , it fast and the packing are very good too. View detail
To prevent the fins from collapsing
I bought this to prevent RadiatorCore from collapsing.
The Motorcycle I used to ride didn't have such a Guard, and that's why the fins would get crushed by stepping stones, etc. and not cool → going to the verge of Overheat!
I bought it as a Risk hedge because I was in a bit of pain.
The price is a little more effective than other manufacturers, but the product itself is thin and flexible.
Therefore, it fits to RadiatorCore which is slightly curved, and the adhesion is good impression.
Also, because it is a dedicated product, the position and dimensions of the holes for installation are just right.
I have used it for about 2 years and it works well. There is almost no Core crush and Protection performance seems to be good.
If I mention a point to be careful, it is attention to the injury at the time of the installation. As you can see in the description, the thinness of the product makes it easy to cut the edge, so it is better to avoid working with bare hands.
It is better to wear military or mechanical gloves for protection before working.
View detail
Fits: HONDA CB1300SF, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300 SUPER BOLDOR
Very good
Parenthesis good. Installation is no problem. I'm giving it a 4 because I'm not sure how protective it is yet. View detail
Fits: KAWASAKI Z1000, KAWASAKI NINJA1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000
Nice texture, but expensive!
Texture is good and easy to install.
But I think all Radiator guards are overpriced.
Parenthesis gets better, so I can't help but say, well, I can't help it….
View detail
Too inaccurate.
Parenthesis is good
But the accuracy is too bad, I have to bite the Washer and do some other things to make it deflect and scare.
I can't believe the price of this product.
The ones I purchased were not horizontal mounting holes and were not adjustable.
As for what others have said about the mounting part being white, it can be removed quickly with the protective seat.
View detail
I'd be happy to pay a little less
The texture is good, and the size of the hole is different between the center and the edge.
Personally, I would be happy if the price was a little lower.
View detail
The price is …
It would be nice if the price was a little lower. View detail
Fits: HONDA CB400SF VTEC, HONDA CB400SF Revo, HONDA CB400SF Revo
Merchandise management issues.
The Holder Bracket was enclosed in its unprocessed state.
The originally invisible side was processed.
How do you manage your products?
I am very disappointed. I would not recommend it to anyone.
View detail
I should have worn it before it hurt.
I decided to buy it because I saw a small stone scratch on the Radiator when I looked at it right after I delivered the car and came home.
I chose Etching factory for my MT-09 last time, but I liked the KFACTORY Logo after some hesitation.
It's easy to install, just set the anti-vibration rubber on the top of the Radiator, then set the claw on the top of the anti-vibration rubber and fasten it on the pure Normal Thread Screw at the bottom.
The performance after installation is as expected and I am happy with it.
As for the point that was worrisome, when I noticed the middle rubber of the anti-vibration rubber with three points, it was gone, but there was no Chatter sound even in two points alone, and there was no problem at present, I watch the situation in the future and go to deal with it.
I think it's a subtle individual difference between either Radiator or Kowa Guard.
View detail
It was a pimp!
The Installation Instruction Manual was also polite and the product was pimped out.
The disappointing part is that the seal on the manufacturer's name came off after just one day of running, and the price.
View detail
Very good compared to the OEMOption
I have been using OEMop's Core guard, but the OEM has coarse eyes and the guard It had low performance and was vibrating and making noise because it was not protected against vibration
KFACTORY's core guard has a fine-grained eye and is expected to provide good girth performance Stainless steel for good texture and anti-vibration measures to eliminate unwanted noise It was
The only thing that bothered me was that the packaging was well packaged, but the edges were probably from storage was slightly bent It is thin Stainless Steel, so I bent it to fix it, but it didn't come back clean
View detail
I'm very happy with the look and function of the product
I was going to get a plastic one for about 5,000 yen, but I was worried about its durability and strength, so I went with this one I did
Material:It is made of Stainless Steel, so it is reasonably strong, but it is also lightweight and can be mounted securely and does a great job of protecting the fins of the Radiator
It also comes with an anti-vigilance pad, which is kind of nice
It looks good and Parenthesis good, so the price is reasonable
View detail
HoneycombEtching is Parenthesis
Very easy to install!
Anyway, Parenthesis is good It is inconspicuous but …
It seems to be useful enough to protect the Radiator
I wish it was a little cheaper, but every Manufacturer would charge this much
View detail
I chose it by looking emphasis
I wanted to install before running so I had it installed at the time of delivery.
The reason for choosing was to change Engine slider to K-FACTORY (^^)
I think that there is not so much which Manufacturer in particular is good for this product.
View detail
Protection effect is good
As I reviewed earlier, I put on a vibration isolating Seat so as not to interfere with the Radiator, but a beeping sound comes out with acceleration from 2000 rpm or less
The current product is Rib on the lower side (fold) There seems to be strength, but the initial product may be due to the absence of Rib ??
In addition, since the engine itself is vibrating under acceleration from 2,000 rpm, which is originally 4th speed or higher, since the beating sound of Core guard is the marker, I am driving as if I do not hear a beeping sound, so I wonder if it is okay I will
View detail
The thing of this hand - - -.
Since Guards of this kind are almost the same shape, Design, Material except for expensive Manufacturer, we tend to choose a cheaper one if it is the same price band. Afterwards, it seems preference of Manufacturer logo. I tried compared with a person wearing other Manufacturer, but there is no special difference. View detail