Reviews
Fits: HONDA CB300R, HONDA CB125R, HONDA CB250R
It's difficult, isn't it?
I put Meter's Film on the new car.
I thought it was no different than GlassFilm for cars.
He applied it with a mild detergent.
Eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee dust ・・・・ tears
That's a tough one.
I wouldn't worry too much about it since it's for Meter Protection purposes.
Fortunately, it is expensive and contains two different types of films.
I'll try again next time.
You must be a PRO to be able to do this so beautifully.
View detail
Fits: HONDA CB1000R
Easy for everyone, not for everyone.
I'd probably buy this 3-Quantity.:4 Set
because Somehow I'm not satisfied with the finished product." From
What I mean is that, first of all, the design phase Film shape/effect after installation." The accuracy of the product as a "product" is satisfactory, but the manufacturing process Accuracy and quality as a final product." not very good
The manufacturing method is probably to stamp out the Seat with a die, but the fine BALI is left in a few places on the edges, so no matter how much you apply it to Beauty, those few places will float…MeterFilm is not a very strong product, so it is not strong enough to stick, so it will float a little bit. It's a little bit of floating, but it bothers me a lot, and once it floats, there's nothing I can do to hold it back.
As a solution, you can cut the straight edge of the Film by 0.1mm before applying it. (I had to buy several times for this reason, resulting in a huge surplus of Antiglare).
So (Okay, okay, you put it up well.) I was gently wiping the corners of the bag, and it caught a corner and floated away, and then I got a fine dust in it and said, …... "… You really are a …" something like that
Image of the product. Pi Turn!" But you should not expect perfection!
Of course, if the compromise point were lowered to the extreme, Large would be sturdy, but since it's always in sight, that's not going to happen in the end. (It's my fault.)
Maybe the finished product would be better if I made it myself using Free cut for PC….
View detail
Fits: HONDA CB1000R
It is a pretty good product!
It's a product that buys peace of mind.
Instruction Manual is also very careful. It is recommended to apply it carefully in a place where there is no wind.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
PanelProtection film was applied prior to delivery.
I bought a new car at Kawasaki Plaza, so I was able to put it on on the day of delivery in an environment free of Garbage and dust in the store.
Kawasaki Plaza was also pleasant enough to take the time before explaining the delivery of the car, and I was able to attach it with a sense of calm and peace of mind.
I was able to paste it well.
Since the size is a little smaller, place the film on the panel in advance and check the gap size around the film in the panel.
Image and then paste with Just fit.
Since the patterned paper is included in the product bag, it can be applied beautifully by gently pressing down on air pockets and the like.
I pasted the Super clear (transparent) one, but it looks like it is still OEM with nothing pasted on it, and I didn't realize it was attached.
It is a beautiful finish that I can't believe. I would eventually like to purchase one from the same Manufacture when the Panels are damaged.
View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
Construction is easy.
originally [Color] By applying the film, the clear screen will look like frosted glass.
It is my personal preference, but I thought it would be more Refreshing to cut out the Protection film from the phone.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
Wound prevention
I had a hard time attaching it, but I managed to do so. View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
[Color] Clear Protection Seat
It was easy to install, just spray water with a misting spray and use the included brush to release air bubbles. View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
Meter panelFilm
The Meter was applied to the Meter without wrinkles as long as the dust was removed cleanly. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
Meter panel protective film to protect from scratches
Asking PRO to protect the Meter panel just in case it seems to fail to stick.
The workmanship is good, but I am not very satisfied with the overall cost performance, including the labor cost.
About the contents of the product, 2 FilmQuantity:It is a Set, but Antiglare is not necessary and two Super clear cards are fine.
If you fail, there's always the next time ….
View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
Price suitable
It was put up at the same time as the car was delivered.
All Quantity:It comes in a set so it can be applied right away.
I don't think air will get in unless it is very messy.
However, the visibility will be adequate.
Do you want to see the OEM intact and clear, even if scratched?
Do you want to endure the visibility and continue to ride in peace?
Can it be scratched in the first place?
I feel safe. (Insurance for the mind) I chose the
View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
Visibility is somewhat reduced.
It will be somewhat difficult to see, but I think this is something that can be solved by getting used to it.
Installation is very easy, but the Instruction Manual will help you to "Blue" (Sealetc.) is probably the one labeled "Black" I think it is a good idea.
However, it is easy because all you have to do is wipe the Meter clean and apply it.
I had a little air in it during the application process, but I was able to remove it by lightly rubbing it and pushing it to the edge.
It is not SUPERJUST fit, there is some gap, but I personally don't mind it.
View detail
Fits: HONDA CB1000R
Size is perfect
I bought it because I was worried about scratches on the meter panel. It was well made and the size was perfect. Quantity as expected.:I'm glad I had two of them because the first one failed. I'm not sure how to use the different colors, but I'm satisfied. View detail
Fits: HONDA CB250R, HONDA CB300R, HONDA CB125R
CB250R.
I tried to put Antiglare first, but Meter looked blurry, so I put Super clear again.
I wasn't even sure how it worked as Antiglare.
Super clear is so beautiful that you don't feel the existence of film if you put it well.
But, because I failed a little, I used the remaining film after removing this film as a mount for Size:I think I'll try to use Free's smartphone Film with Cut.
View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
neither good nor bad
After a little use, the edges started to float slightly.
Probably not enough adhesive on the subtle curvature of the edge of the screen.
Well, it's generally stuck to the surface, so if you don't mind the details, I think it's large and durable!
View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
Size is different in a good way.
As I recall, someone else had written, "Included Parts:other than Seat" were very substantial, and I was able to put up a large part of it beautifully even though I was working outdoors in the wind while holding back my desire to go to the Toilet.
As I wrote in the title, it is Exactly to the hole of Camera like Seat of Mobile phone. The size was a little bit smaller than Meter, but this is the result. It's okay. I also feel like it led to a feeling of sticking. I can't stand it if the dust of Trunk or Door of the car changes even 1mm! I can't recommend it to people who can't stand it, but I think more than 90% of people It's okay. I think it will be.
Some of the air bubbles were almost there, but after a while, they were gone.
I use the matte one, but I can tell the Speed even in the daytime, so I think it's far better than the SmallWound on Dust or something.
View detail
Fits: HONDA CB250R, HONDA CB300R, HONDA CB125R
CRF250L.
Installed on New ModelCRF250L.
I bought it because I thought it used the same Meter, but the shape was a little different, so the Meter is exposed in the hollow part of the lower side.
I think I'm just clumsy, but I couldn't stretch it well because of the air bubbles.
I will buy it again when the one for CRF250L is released.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
Hard to put up, unlike a phone!
It is a feeling of the protection film of the age of GALAKAY, and it is extremely difficult to stick it beautifully.
I think it's deadly when dust gets in!
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
[Color] Clear is a Recommendation!
I bought it as a meter protection film for my Z900RS
[Color] Clear and Antiglare, a Smoked film, are in it.
by nature [Color] I wanted to use Clear, so I practiced with Antiglare at first.
I didn't intend to use Antiglare, but it was far too dark and visibility was lower than I imagined.
Because it is almost Exactly Size for the round meter, it is also Large strange to peel off.
the real deal. [Color] Clear, but I was able to apply it well, being careful of the air bubbles.
It was so clear that you couldn't tell that it was pasted, and it was just as super clear as you'd expect.
I was Large happy with this, but...
One day, about a year later, the protective film became WrinkleWrinkle...
Perhaps I wiped it down with Dustcloth with Plexus on it.
It was very awkward and I ended up stripping it off.
It wasn't a bad product, as long as you were careful not to wipe it with Chemical.
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX-25R, KAWASAKI Versys-X 250, KAWASAKI Ninja1000, KAWASAKI Ninja 650, KAWASAKI Ninja 400, KAWASAKI Ninja 250
I'm not buying anymore.
I bought it because I thought it would be like a Seat to put on my phone.
But the original is just a transparent tape in the shape of a meter, so it doesn't release any air bubbles.
View detail
Fits: HONDA CB250R, HONDA CB300R, HONDA CB125R
To prevent scratches
The latest motorcycle meter is a Large Display, which is very sensitive to damage. It's easy.
I bought it with the purchase of a Motorcycle.
I think it's a bargain because it comes in two types:anti-reflective and glossy.
It's made by Peitzmeier:https://speedo-angels.com/Made of.
The speedo-angels website explains how to paste it, so it's easy to understand.
View detail