Reviews
Sure, it's bright, but...
Used for Cub Pro (JA10).
Installation, but Controller does not fit within Light.
It will be installed outside.
It was installed under the FrontBasket.
I ran it and it does indeed brighten up.
However, there is a mysterious light on the Left. This is for oncoming cars and people.
It is thought that it will be dazzling, so I put a Tape on the Headlight.
We made it harder to get out.
The brightness is good, but the light scatters, so that was Minus.
Caution should be exercised by those who are concerned about oncoming illusions.
View detail
Safe on dark night streets
I chose this product because it has a good reputation and is compatible with AC power, even though it is a bit more expensive than the cheap Chinese products. The WR155R has a harness under the meter that is in the way and it was very difficult to fit the light unit. I think the degree of difficulty will vary depending on the car model. It is not very bright, but I can now do night runs normally, which I was afraid of in NORMAL. View detail
Ideal for vehicles with inspection
The LED H4 for direct current was installed using the AC-DC conversion power supply for Headlight. (4-sided irradiation type)
The optical axis did not come out and I was forced to return Halogen,
We took into account the previous reputation of the AC-compatible H4, which would have a light shaft.
HS1 of God of thunder Gu2 purchased this time. pedestal processing premise.
The base of HS1 is small and sturdy.
The optical axis was perfectly aligned. The color is LEDWhite to SunLight, so it looks a little yellowish.
Merit is Large size because the conversion power supply could be removed, which simplified the process.
View detail
very bright
[How is it used?
Since the Light is dark.
Was the one you received as per Image?
Yes
Was the installation difficult?
Is it difficult to find a position to attach the BOX?
I refer to other installations on Net to 6V MONKEY/GORILLA Main Harness.
Bundled with inHemp palmock.
How was your experience with it?
It is very bright. Safe at night.
Be sure to adjust the optical axis properly.
It is a nuisance to oncoming traffic.
If it is too white, it may be difficult to see on rainy days.
I decided on 4500k and it was the right choice.
I am happy with this for commuting.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
No worry about running out of brightness.Compact
[How is it used?
Valve does not run out.
About 10,000 yen.
The whole Unit is very Compact.
The heat dissipation design looks good.Gold color is also good.
Very bright and satisfactory.
Was the one you received as per Image?
Yes
Was the installation difficult?
fairly easy
How was your experience with it?
Satisfied
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
None
When assembling, do not damage the Valve.
View detail
So so
Arrived in 3 days after ordering, saw it installed immediately.
The vehicle I installed is JA10CROSS CUB.
Takegawa's LEDKit failed as soon as the warranty expired.
Headlight was DC'd with the contents of the Kit, and I had God of thundergα on it.
When I was concerned about a lot of battery burden by DC conversion
I've been curious about this for a while, and I decided to try it out after finding the God of thunder g2 for both directions.
Headlight circuit back to AC (OEM) for installation
Does the color feel darker due to 4500K?
The brightness of both God of thunder Gu2 and God of thunder Guα are the same at 1800Lumen.
But God of thunder guα is White color light at 6000K, God of thunder gu2 is Sun Light at 4500K?
I think it's unavoidable because White and Hassle look brighter when Drilled.
By switching the headlight back to AC, the burden on the battery was reduced and the voltage was restored, which resulted in a large Merit.
Is the Cutline of the CROSS CUB horizontal?
God of thunderg2 will have a Line that goes up Left!
Takegawa's Light was made by PIAA, Line was horizontal, God of thunder guα was also horizontal (but two projections like a horn appeared)
The reason for this is that the Reflector is installed in a tilted position (it is installed in a tilted position in the OEM state).
It's nice to be able to see the Left on the Cutline when it's up on the Left, but I think the LED light is annoying to cars running on the Left Side.
I removed the screw that was locked and installed it vertically, and I saw two things that looked like horns on the Cutline.
This is also a symptom of God of thundergα and seems to be a product feature of this manufacturer.
When I put it back, the Right Side of the two corners became Small, and the Left Side became Large, and it became the Cutline of the left rise.
Oh, I interpreted it as a way to hide the glitch.
Because LED light is dazzling, the horizontal line is becoming more and more.
There are still more Left up vehicles, including Car, and as I mentioned before, Sun Light seems to be darker.
I've decided to use it as is.
Most importantly, I appreciate the 3 year warranty.
This vehicle is used daily for commuting, holiday touring, etc., so durability will be verified in the future!
I'd like to add a note when it breaks.
View detail
It is one of the few LED headlights in the HS1 that is AC compatible
Long-awaited Headlight LED is now available
Second Type Model KSR Headlight is Multi- reflectorized
It is a little brighter than the First Model Type and can be driven in the city without any complaints etc., take care to drive at night
If it is the First Model TypeKSR, it is using PH7, so it can be used for AC compatible LEDs Conversions are easy to do as well, as there are various products from trusted manufacturers
However, there was no corresponding LED in HS1, and our predecessors converted to DC and used H4, or used AC I had assembled a suspicious LED of
I found out that the light distribution is Gap, or the DC converter can't withstand the voltage width of the large size It wasn't practical because there were so many problems with shorting and so on
In such a situation, we have finally developed a new product that is HS1/AC compatible and has a 160 V withstand voltage large-capacity condenser LEDs are now available
What is a NORMAL bulb, although it seems to consume less power than H4 = lower lm, assuming a moped You can't possibly compare, and the price is less than $10,000 after tax, and the 3-year warranty is a nice touch!
Needless to say, I ordered it as soon as the decision was made to release it
4500K wasn't popular = less manufactured? We waited a long time for delivery
But even if you have to put up with the wait, I think it's worth the exchange
You'll never use HiBeam, will you? The field of view expands so brightly that you may think "I'm not going to be able to see
On the other hand, if you choose HiBeam, the optical axis is too close to the Center, so it may be a little difficult to see
I dare to choose the 4500K for practicality rather than dress-up
I don't think I'll be riding in rainy weather much, but is it easier to see than the 6000K?
I'm curious about the installation..
In the case of KSRPRO, the Headlight's RubberBoots have been replaced by the Connector and It's an integral part and needs to be processed
I don't cut Boots to the Valve Width Limit and leave a lot of space between them
Waterproof performance may be reduced, but considering the volume of the KSR Light case And if it is too tightly sealed, heat is likely to build up
And since the LEDs are fanless, it's a Large width Cut for a little cooling
Others just sticks Wiring in the Connector without thinking, so even if you're a beginner, you can still use It's easy to install
Incidentally, the one you're currently using is the second one? to
The first one flickers immediately after installation (this is also written in the product package) It was shown
It said that increasing the rotation would calm it down, so I blew the Engine a little...
In less than 30 seconds, the light was unlit
This is the time for a reliable 3-year warranty
Needless to say, I sent out an Objection that day
As a result, I had to wait about two months before I got it back with a part replacement
He didn't give me the details of the cause, but was the Condenser puncture? That's right
I don't know whether it was a defective product due to the initial lot, or whether it was replaced by the countermeasure product, but the second one is stable It's lit
If you have purchased this, if the flicker occurs immediately after it is built in, you can use Controller I think it's best to think of it as a lifespan or defect in
No lights at night is dangerous, so please consult your dealer as soon as possible
View detail