Improved operability

Installed to improve the operating feel rather than to change the position.
The rattle-free Pedal and biting Footpeg provide a good feel for the operation.
The Position is quite high, so my 178cm height, combined with the low Seat, made it a bit cramped.

Spare parts are set for all of them, so they are safe even in case of breakage. View detail

To the true SS Position

I installed it by myself and it took about 3 hours. The rear brake side is hard to adjust without removing it every time, so it takes time.
The instruction manual has some flaws. The direction of the brake switch bulb is reversed, and if you follow the instruction manual, you will not be able to reach it.
Even if it was reversed, it was patched and the line was removed from the Cable guide and corresponded, and it was a little disappointing because it was a Brand of trust.
I have replaced the exhaust system with SP Tadao's Exhaust System and Clearance is fine.
The weight was about 1600g for OEM/1100g for this product. I didn't measure it exactly because of the presence of common parts, etc., so it's just for reference.
I'm going to use the OEM Footpeg Mounting Bolt, but the screw lock is so sticky that I can't manage the torque until I remove it, so a Brass Twist brush would be better.

The footpeg is so GizaGiza that the Large root can be let down and the Grip feeling is Large strange good.
The knee that used to be in the cowl is now in the hollow of the tank, making it easier to hold. View detail