Reviews
Operation check complete
Quantity:The Instruction Manual says to adjust the length of the 2pc cord, but the Tie Wrap is too tight to adjust. The Tie Wrap was so tight that it was embedded in the cord's clothing. I had to remove the Tie Wrap because it was too tight and it might become a resistance.
The grip will probably get used to it quickly. The warmth is also good.
View detail
Super easy installation
I bought winter Gloves but after an hour my fingertips are dead.
I was considering Grip heater and found it.
It's super easy to install and remove.
It is used in conjunction with Knuckle Visor.
This will allow them to survive the winter.
View detail
at your ease
Installation was easy. However, since the grips were replaced, it was a bit more difficult since they are slightly thicker than the normal ones. The feeling of use is that it does not get very hot because the voltage seems to be a little insufficient since it is taken from KITACO's two USB ports. But I am satisfied because I could easily install it. The temperature does not drop that much because it is used in the Kansai region. If I were in a northern country, I would not be able to use it this way. View detail
Easy to put on and take off, but warm enough
I was thinking about a Grip heater because I really don't like cold hands in winter, and I was interested in this product because it is an easy spec. to wrap around the Grip with USB power supply. I read other reviews and thought it would be useful, so I bought it and installed it on my CT110 HUNTER CUB. In my case, the USB power supply of CT110 HUNTER CUB is 2Ampere and this Grip heater is more than 2.1Ampere, so I was worried because it is a little short. The way I wrap it around my hand, it hits my fingertips. Then I don't have Heater on my palm but I don't feel cold when my fingertips are warm. Also, it was more convenient that way because the distance to Brake lever didn't change. However, I use it on high because it is cold. I use it on high because it is cold. Medium or low is not good in temperatures below 10 degrees Celsius. I also use a hand guard to prevent direct exposure to the wind. I think it was a good decision to buy this product. View detail
Two units share a pontoon griffin
[How is it used?
Shared by CT110 HUNTER CUB (CT125) and Motoguzzi V7?
Was the one you received as per Image?
The heating element and harnesses are well made and seem to be durable.
How was your experience with it?
Connect to Motorcycle USB Socket (made by DAYTONA), Cigar socketType USB Socket and Phone Charging Battery. "strength" Riding around the city in 3SeasonGloves in MODE. It's so-so warm.
I think it is warm enough for 8 to 10 degrees Celsius outside, but it may be better than nothing in the middle of winter (I have not experienced it).
Easy to attach and detach heating element grips (easy to switch between two units).
The instruction manual says to use Tie Wrap Fixing after installation, but I don't have a Gap, so I use it without Tie Wrap.
The heating element is positioned to warm the base of the finger to the belly of the finger.
(Grip tends not to grip, so the belly of the hand does not warm up)
It can be used with a smartphone charging battery, so a motorcycle without a USB socket should be OK.
I purchased a 3-stage temperature control with Switch, but in the wintertime. "strength" Since I think it will only be used in MODE, I was happy with this inexpensive Series product without the temperature control Switch!
[Points to note]
It is not waterproof specification, so please be careful in the rain.
I'll do a start-up inspection to make sure the heating element cord on the Throttle side doesn't get caught.
How did it compare to other products?
I was also a candidate for the other company's product, which is a type of heat-generating Seat that is fastened with a String, but I decided on this product because it is easy to detach and attach when two units share a Seat.
View detail
For street riding
It's good for shopping and other small errands. View detail
Easy to install
Installation was easy, the grips are a little short, and the temperature seems a little low. The grips are a little short, and the temperature seems a little low afterwards. View detail
Grip heater
Installation was easy; Wiring took longer.
It warms up fast! The three-stage switching Switch is convenient.
View detail
First Grip heater
Purchased to equip CT110 HUNTER CUBCT125 in winter.
When worn at the same time as Komine's Handlebar Cover, summer Gloves temperatures below 5 degrees Celsius are not a problem when MAXMODE is in use.
To plug in the retrofitted USB, I used DAYTONA CONNECTOBoots + Tie Band for rain protection. It seems to be no problem.
The only concern is that the grip heater will make the grip diameter thicker, making it a little harder to grip.
View detail
A winter necessity for mainly city driving.
I was looking for a removable Grip heater, but this Clip type product seemed to be easy to install, so I bought it.
I installed it on my PCX150KF30 and it works fine without the Tie Wrap.
The grip is thicker, which makes it unsuitable for sports driving, as it makes your palms feel tight for a long time.
The PCX doesn't require much accelerator operation, so it's just fine, but I'll remove it when it gets warmer.
It is not designed to heat up the entire grip, so it is used exclusively for fingertips, but I use the Handlebar Cover with it, so I think I can handle it even in the middle of winter.
I connected it to the ServiceCoupler- using a DAYTONA USB power supply, but it was warm enough.
Now I just have to see how long it will last.
I should have bought it sooner.
View detail
It is easy to install, simple but effective
I thought it would be good if I could use it only in the cold season, and I thought about the electric heating Gloves at first, but from the experience that I bought and used the electric heating Gloves several years ago, I couldn't do anything when the battery ran out, and the battery part was bulky, and the fit was not good. Then, I considered the wrapping type Grip, and I decided here that it was easy to put on and take off, could be powered from USB, and could adjust the temperature.
This product fits directly into your Motorcycle's Grip and plugs into the USBJack for easy installation.
There is a bit of resistance when fitting the product into the Grip, so it fits tightly, but if it gapes during use, you may want to use a Tie Wrap to secure it.
I installed it on my Yamaha SCR, but the grip on the Left side shifted outward, so I used a Tie Wrap to keep it from moving.
By inserting this product, the grip (22.2?) of NORMAL becomes thicker.
It seems that there are many people who feel uncomfortable that the Grip becomes thicker, but I do not feel uncomfortable because the feeling that I gripped is about to become the thickness of the Inch grip (25.4?) of the Cruiser system.
It's the heating effect that's important, but it can be adjusted by switching between three levels.
I use Three seasonGlove in the daytime (temperature 15~18℃) of October-November beginning Low." From "Inside about (when it is cold in the morning) "strength" ), daytime (about 15°C) in November. "Inside From "strength" In the daytime (around 10 degrees Celsius) in December, the winter Glove "strength" It is used in
As you can see, in December, it's not as good as a replaceable Grip heater.
It's more than warm. "Lukewarm." But even with this product, my fingertips don't get itchy.
The Heater part covers about half of the Grip's circumference, so you can decide where to put it (palm or fingertip) according to your preference. By the way, I choose the position so that my fingertips don't get bitten.
The difficulty is Waterproof of the USB power supply part.
Because it is bare, it is necessary to take measures to waterproof the feeding part when using it in the rain (I refrain from using it in the rain).
View detail
I guess it's better than nothing.
Even on the highest setting, the part where the Grip heater hits is slightly warm, but the rest of the body is not warm, so it's better than nothing.
I think that the electric heating Gloves that warm the whole hand are more effective!
View detail
It's warm.
This is my first Grip heater.
Because it is not a Type built into the Grip, it does not warm the entire palm of your hand, but it warms it enough. Of course, the back side of the hand is cold.
It is necessary to pay attention to the Grip because it becomes damaged when you put it on and take it off. At first, it wraps around the Grip tightly, and the position does not change even if Axel is twisted, but it comes to gap when using it.
Waterproof Specification, but I don't use it on rainy days because I don't want it to break.
View detail
It's so warm, you don't want to take your hands off the Grip at the stoplight!
I bought an electric heating vest from Home center and after using it for touring, I couldn't live without it. The Grip is USB powered so it's super easy to wire up if you're wearing a USB port, and the body just fits over the Grip so it's easy to replace if you have more than one. The Body is easy to replace if you have more than one car. It gets warm pretty quickly, and my palms start to feel warm, so I don't want to take my hands off the Grip even when I'm waiting at a traffic light. The grip is a little bit thicker, but once you get used to it, it's not a problem. View detail
For a simple model, yes!
Installed on SecondMotorcycle's CB125R.
The OEM Grip heater came standard on MainMotorcycle's CRF1000L and I knew it was effective during the winter months, but the price was high and I was wondering what to do about it when I discovered this product.
Installation is simple and only bite to Grip. After that, it is only clear and concise to insert it into USB of 5V2.1A and set it to any setting with Controller. You can also use Mobile Battery if the output supports it.
The light of Controller is quite bright, and visibility is good even in the daytime. Also, Button's Click feeling is good, and it is easy to understand whether it was pushed even through Gloves.
The temperature is a little lower than the Honda OEM grip heater. The OEM heater heats up the whole grip, but this one only heats up the fingers due to its structure, but it is enough.
The cable is shorter than I expected, so if your car has a USB socket under the seat, you can't install the cable. if you don't have a USB socket near the handle or Mobile Battery in the tank bag, you can't connect the cable.
Also, it is necessary to fix the Throttle with the Tie Wrap because it is easy to gap by twisting the Throttle. If you use it without fixing it and notice that the Throttle side Wiring is fully extended, there is a possibility that the wire is broken.
If you install it correctly, it is the best Grip heater in the market.
View detail