Idol adjustment position is hopeless while almost pontooning.

Purchased because it is compatible with Normal air cleaner box
I had a bad feeling because the IdolAir Screw was offset 90 degrees from the OEM position, but I didn't think it was a main frame interference zone.
In the OEM position, the Idling adjustment can be worked with a longer Driver, but this one doesn't even have a Driver, let alone a hand.
If I remove the air cleaner box, I can pick it up, but I'm not sure if it's worth removing the air cleaner box and adjusting the idol.
The factory setting seemed to be 2 turns back, and if I believed it correctly, it was at about 2000 rpm, so I tightened it 1/3 from there and settled at 1480 rpm +-50 at the 1 and 2/3 turn back position.
MONKEY125 does not have a tachometer, so it needs to be read by a clip type tachometer, sub computer, or external meter.
It's more about where Screw is.
Aluminum back plate and gasket are included, but if not used, the rubber gasket will protrude.
Intake air volume is increased by about 10% by calculation, so fuel adjustment is required. View detail