I think it looks sturdy and has good cost performance.

The pipe is thicker than I expected from the picture, and it looks sturdy enough that I don't feel uneasy at all when I straddle Seat while lifting it with this.
I'm thinking of buying another set for one vehicle or so, since all I have are motorcycles that don't have center stands. View detail

Satisfaction over function

It had been wanted for some time, but Motorcycle was knocked down by the typhoon and Large repairs were required I took the plunge with Timing that I needed and bought a front and rear STAND
It's not surprising that the ease of maintenance is improved A sense of doing is a great way to get upset
HondaCBR250RR (MC22) 、GROM (JC75) It is used in

What made you decide to buy?
In addition to the above, we selected Plating because of its appeal
Image to match if the color is a Manufacturer vehicle that has drilled The Plating was the most appealing to me, although it seems to lift my mood with

How was your experience with it?
The ability to easily jack-up and maintain at any time is even better than I expected
The ease of washing the car alone makes a huge difference
Chain cleaning and grease up is now easier, so I have to do it more often than before Maintenance

The ease of maintenance and the range of maintenance that can be performed is increased It was very satisfying to see a motorcycle on the stand
That's what the Motorcycle hobby is all about! View detail

Easy to use

I used cheap products of Manufacturer unknown, but because it was hard to use, I replaced it with ETHOS.

good point
Since the rigidity is solid, even if the car body is shaken, it does not go guyagguha.
The thickness of Pipe of the handle part exactly grasps exactly and it is easy to put in force.
The movement of Caster is good and it is easy to get in under the car body. * If it is cheap, it will not move if the weight hangs on the Caster, or it needs considerable power.
The price is just right..

A bad point
Because the handle part is long, it is easy to put power, but Space is also required for that View detail

I am satisfied..

It is easy to use as usual. It looks pretty good too. The Rubber of the Mount part is also thick and relieved.
Pipe diameter is also large and secure. I do not feel dissatisfied, but I wish it was a bit cheaper ... View detail

Easy to use!

J-Trip etc was also a candidate, but I liked Chromium Plating and liked Ethos Design's items so select this.

It can not be used within my narrow Transporter because of Long Type, but it is very easy to use other than that.

It is cool to use together with Front stand of the same color! View detail

Without Center Stand car necessities

Chain Maintenance, Wheel Cleaning, Appearance Fun - - - I am variously active in Large. Actually I was looking for Y's Gear made, but I made a choice with production ended.
The Pipe diameter of Body is good from the viewpoint. I think that the rigidity is perfect. By the way it is a combination of Hook bolt + VHook.
As soon as I come up with it, I will run it as soon as possible, so I'm typing, so I do not think about time and work in the middle of the night, but I'm hanging on by myself alone. But if you prepare a little thing, it is very easy. In the case of my author, I lay a wooden board under the Side Stand and hang the car body in a state close to horizontal. When unloading, put Side Stand out and put the board on the bottom, so that the Side Stand will ride on the board as soon as the STAND goes off. If you get used to it you will not have to worry about knocking down the car.
Because it is VHook, in addition to having less contact surface with Hook bolt, there are things that Bearing is used for Caster, so there is no need for forces to take off and it is possible to do Smooth. Body has a reasonable weight, if you dare say that degree. View detail

There is a heavy feeling, it seems to last long.

I got lost by Ethos, Battle factory, JTrip, but decided to Ethos with a solid feeling with Stainless Steel. As a result, there was no regret. Because R25 is light, you can put a STAND on alone while fixing Tail cowl with Left hand. Exclusive Design's Battle factory looked nice, but given the latter things, I thought that it would be preferable to use width adjustment because I could also use it for my friend's Motorcycle.
JTrip is not bad, but as I looked at other people's reviews it seemed rusty. Lever is long, Lever is easy to work up, Race ish looks as well, but be careful as passing through the back of Motorcycle as it blurs, as it may stumble (Lol) View detail

It purchases in order to maintain by itself. It becomes easy to give cleaning, adjustment, etc. of the Chain to this [ this ] by using the Maintenance stands. hanging from the J Trip's thing, since V character Hook of the Ethos

It purchases in order to maintain by itself. It becomes easy to give cleaning, adjustment, etc. of the
Chain to this [
this ] by using the
Maintenance stands. hanging from the
J Trip's thing, since V character Hook of the
Ethos has short one side although compared also using the


J Trip's thing -- easy --
-- further -- a Caster's favor --
-- the Lift up was able to be carried out easily.
--
-- I think whether since the result of goods is beautiful, there is also any pleasure to
see again.
--
-- it was a dramatically satisfying article. View detail

Since the center stand was not attached to its own motorcycle, it mainly purchased to care and cleaning of the chain. Although it wavered with the J trip's thing, it became a conclusive factor that the stand here was strong plating processing. It

Since the center stand was not attached to its own motorcycle, it mainly purchased to care and cleaning of the chain.
Although it wavered with the J trip's thing, it became a conclusive factor that the stand here was strong plating processing.
It was surprised for it to be too light when a stand was applied for the first time.
There is also no necessity of also applying weight and it will carry out lift up lightly only by the power of a hand.
It becomes touch that a stand is hidden for having carried out the car body, without a motorcycle also moving forward and backward, since it is a model at the time of a caster.
It is convenient, if it is Colet even if there is only the last space.
I regard what does not have a fear of coming off as treatment somewhat coarsely since it is plating processing too in it as it being the merit which chooses this. View detail

The stand of RIA is a thing of ethos. If it gets used, a stand-up can be carried out comfortably alone. By the favor of this stand, maintenance called attachment and detachment of a chain or a tire can be performed comfortably. It is what now

The stand of RIA is a thing of ethos.
If it gets used, a stand-up can be carried out comfortably alone.
By the favor of this stand, maintenance called attachment and detachment of a chain or a tire can be performed comfortably.
It is what now is indispensable.
Since V character hook will be metal nakedness if allowed to say one avarice, there are a swing arm and a possibility of in addition to this damaging the circumference of rear one.
It is ~ [ if ] if rubber coating is carried out (>_ View detail

It purchased in order to carry out maintenance of the circumference of rear one by itself. Is it really found useful to work alone? Cleaning of the wheel also became easy, it also came to reach the circumference of lower and work became easy.

It purchased in order to carry out maintenance of the circumference of rear one by itself.
Is it really found useful to work alone?
Cleaning of the wheel also became easy, it also came to reach the circumference of lower and work became easy.
Although other you are writing, since height adjustment etc. are possible and the roller is also attached, user-friendliness is dramatically good.
It is the recommendation !. View detail

He thought that he would carry out maintenance of the circumference of a rear tire at home, and it purchased. The thing which the height control of is possible while many maintenance stands have come out, and can also perform adjustment of width, and

He thought that he would carry out maintenance of the circumference of a rear tire at home, and it purchased.
The thing which the height control of is possible while many maintenance stands have come out, and can also perform adjustment of width, and also the thing with a roller were chosen.
It could use, could work very comfortably and is satisfied.
We recommend it especially to those who work alone in many cases strongly.
I thought that it was a disadvantage thing which is not. View detail