This is a product that should be sold mounted on the Lever from the beginning.

I managed to install it all by myself.
I skipped the split Pin and lost one.
I bought an additional one, so only one Knob is left. View detail

The quality and shape are awesome, and it only takes a couple of minutes to install it in Lever with the right tools!

You will need:cotton swabs, appropriate grease, Tweezers, 2?pin punches, and Hammer

Align the holes in the Lever with the vertical direction
Take a small amount of Grease on the tip of a cotton swab and apply it to the press fitting area

After painting, insert the Adjuster Knob into the pot and align the holes

Grasp the roll pin with Tweezers and place it in the hole

It's easy to get in with a 2? pin punch and a hammer

Other imprecisions said it was difficult to press-in, so I had to get my tools together before I did it

You can buy a 2?pin punch at Straight for 200-300 yen

Cotton swabs, Grease, Tweezers, and a hammer were the things I had on hand
I used Silicon grease for the Grease

Notes

You need someone to hit the first one or two shots
It is possible for one person to do this if a little roll pin is put in View detail

Installation is pretty annoying

I had read in the Review that the installation is Large strange, but it is difficult to install than the imagination It was the first time
The adjuster piece is fixed with a pin, but the pin is not as large as the size of the hole It is necessary to press-fit it because it is large
I tried to get it in with all my strength, but I couldn't
Cool the pin in the freezer, and heat the hole side with a Dryer to expand it I was able to make it if I did
It may not matter that I chilled and warmed up, but I hope it's a comforting reference View detail

Antlion brake lever distance adjuster

Brake Lever Adjuster from Antlion for Brembo Radial Master White Logo and Red Logo The material is stainless steel and the adjuster is beautiful gold. Bremen Radial Master White Brake Pads from Antlion Logo and Red Logo The material is stainless steel and the adjuster is a beautiful gold color. (translated by Google Translator) View detail

The degree of difficulty of installation was too high and I asked for PRO after all

【What made you decide the purchase?】
I bought it for using Billet lever RSCfor Brake Master made by the company.
Lever pivot made by Koken after the exchange of the Brake lever (Gold) As I exchanged it, I chose Titanium blue thing so as not to suffer color.

【How was it actually used?】
I felt that adjustment of Lever is easier than Lever of bremboOEM because of good finger contact.
It seems that it looks and disappointing but it's my favorite, not to be too flashy, to say it is not too plain.

【Mounting was difficult?】
An amateur asserts that it is impossible to install even if using a special tool to press in and fix the fixing pin without scratching the Lever or Master cylinder.
I also tried Challenge with my own Radio pliers, but since I reached the conclusion that I should be able to do it with a bruise, I gently asked for PRO.
In addition, in the hole part for adjusting the Ratio, we have ported Blind's Rubber which was attached to bremboOEMLever.

【Please tell me the installation point and hang】
I asked Motorcycle shop who gave me the installation, but if I press fit with Lever fixed on the MASTER, I said that because the force at the time of press fit does not escape, it is easy to do.
Adjustment on Lever side I was wondering if there was no adverse effect on the adjustment function due to a strange force applied to Shaft, but at this moment trouble has not appeared in the adjustment function.

[Is there anything I was disappointed about?]
The hole for entering Shaft for adjustment on Lever side and Shaft for Knob side does not match delicately and moves with fingers when moved with fingers.
Because I think that Knob's fixation press-fit Pin, I think that it can not be ruled out by rare things, but I think that it is a Manufacturer that sells high quality, so I wanted to build in firmly everywhere

【Hope for Manufacturer - Please let me know if you have any improvement points]
Even those who brought in it also said that they worked with extreme care so as not to scratch the Lever or Master cylinder at the time of installation.
I think that it is honest to say that it is necessary to press a very small pins of about 1 mm into the User side, which has too much hands on the PRO.
In my case, I think that Hurdle's high product is good for those who do not have such an environment like me, although Motorcycle shop who is fortunate to carry on with carry-in Parts is nearby.
If it is possible to do so, even a single color Lineup is good, so I would like you to sell Lever in a set of assembled condition.

【Have you compared items?】
Real product, RSCfor Brake MasterBillet lever made by the company will be dedicated parts so there are no products compared.

[Others]
The degree of difficulty of installation is Berry Berry Hard, but if you have an environment that you can leave it to PRO, you can give a luxurious feeling and ease of use around Brake of your car.
As it is, it is a high product of Hurdle, but when putting brembo's RCSMaster cylinder in a favorite car Plus another article. How about Antlion Brake lever and Knob? View detail

I want you to come with Lever

It is an essential part when purchasing Lever.
Even with installation, it is like feeling old-fashioned slender pin
I think that it is severe if it is a clumsy person because the installation place is narrow.
Although making is certainly beautiful and accuracy is not a problem, I thought that I wanted to design a little more User's feelings.
The adjustment range of Lever is more free and satisfied than the OEM. View detail

I'm fine with ordinary Knob, but ...

This time, I attached Silver's Adjustment Knob of this Silver as One Point to Lever of Titanium blue.

Of goods "Making" As expected is antlion, Large It is clean clearance to enter as hard as I think?.

I am making it fairly pretty, but the cost is quite expensive as much.

Although it looks beautiful, I think that it is good if only Knurl processing around it is good as practical use, so I think that it is good if you can choose a practical and cheap type product with decorative items here.

By the way, I attached bremboLever to Frando's Radial master, but in Frando, I think whether Adjustment Knob about FrandoOEMLever can be used as it is.

Although it looks better, considering the item price, we will be 3 stars. View detail

Beauty is made

As expected it is Beauty with details built by antlion
Like china made machining blade cuttings etc
There is none..
However, Lever is the same, but it is doubt why there is no selling Black. View detail

I've been having an antlion part for my ZRX400 which I used to drive, but the DAEG one was completely different and it even needed special tools for installation. After all, I had to take it to a motorcycle shop to borrow tools for the installation. This

I've been having an antlion part for my ZRX400 which I used to drive, but the DAEG one was completely different and it even needed special tools for installation. After all, I had to take it to a motorcycle shop to borrow tools for the installation. This part is well made. But the attached pins were so small, I had trouble picking it up when I dropped one on the floor.
I think it would be better if it had uniform standards rather than separate ones for mid-size bikes and large-size bikes. View detail

I think that being sold after the Lever has originally ASSY(ed), purchasing with the single article, and constructing by oneself itself has made a mistake in this product. It was difficult to carry out press fit of phi1.5mm and the about [ die-le

I think that being sold after the Lever has originally ASSY(ed), purchasing with the
single article, and constructing by oneself itself has made a mistake in this product. It was difficult to carry out
press fit of phi1.5mm and the about [ die-length 6mm ] pin, and to stop this product to the Adjuster thread part by the side of

Lever.
It is impossible, if there are not a Punch and a receptacle fixture when pressing fit. View detail

When it is the right fall in which a MASTER breaks, since this Parts flies almost certainly, if it is a Circuit, it cannot be searched for (bitter smile). since the Push rod of a MASTER is also almost useless in case of breakage that this Parts flies, th

When it is the right fall in which a MASTER breaks, since this Parts flies almost certainly, if it is a Circuit, it cannot be searched for (bitter smile). since the Push rod of a MASTER is also almost useless in case of breakage that this Parts flies, this Parts should also be just attached to the Push-rod Kit purchased for a Repair, but it is not considerate -- (?) -- it is not attached to things. Therefore, if it corrects at any rate, I will regard sex appeal as it being a Parts good for the direction ... View detail

[a Webike Monitor] -- Although it is satisfied with texture and the function which were purchased as an object for antlion 08002 right-and-left Levers attached to SPORT1000 as the title ... attachment can ask for dexterity considerably. minim

[a Webike Monitor] -- Although it is satisfied with
texture and the function which were purchased as an object for antlion 08002 right-and-left Levers attached to SPORT1000 as the
title ... attachment can ask for dexterity considerably.
minimum -- although the superthin Rivet pin was pressed fit in fixation, the difficulty of the press fit to uniting a hole position and a curved surface was quite high.
It is kind if sale in the state where took means by which there [ some ] were different, or it constructed from the start is carried out. The
function and a Style are satisfactory. View detail

I think that I want a lever main part to enclose it from the beginning although the goods themselves are beautiful, very good structure if it must be purchased aside from a lever.

I think that I want a lever main part to enclose it from the beginning although the goods themselves are beautiful, very good structure if it must be purchased aside from a lever. View detail

they are difficulties for pressing the pin for adjuster piece fixation fit in a lever main part, although it is parts which do not change if it exchanges for the billet lever of an antlion and will not equip by a set -- there is also no fear of separating

they are difficulties for pressing the pin for adjuster piece fixation fit in a lever main part, although it is parts which do not change if it exchanges for the billet lever of an antlion and will not equip by a set -- there is also no fear of separating from it, if even fixation also of ... is possible.
Since the span of adjustable range is wide more than pure, and it can unite with a favorite lever position, they are recommend parts. View detail

It is the piece only for a brake lever of the product number 08811. Although it is satisfied with the highest about the lever main part, it is a question a little about whether there is any meaning which carries out the option of these parts. It i

It is the piece only for a brake lever of the product number 08811.
Although it is satisfied with the highest about the lever main part, it is a question a little about whether there is any meaning which carries out the option of these parts.
It is because it thinks that what is necessary is to set to a main part and just to sell from the start.
Although color coordinates are made or merit comes to mind in case of an option only as for a grade ...
The meaning made into the option since it is parts in which trade becomes invisible from time to time somehow is whether to be around there.
I think that the direction in which is whose merit of this product a solution and present is purchased since it is a thing in which it may be made a set and the price of a body price may rise about 1000 yen.
An answer will be NO if it is called [ Doesn't it function, unless it incidentally attaches piece? ] ?.
Only by adjustment becoming troublesome, it turns with KURIKURI by a smaller slotted screwdriver, and sets to a favorite location.
The rest will be OK if a vinyl cap (a thing like the antenna cap of RC) is put there. View detail

It is a free adjuster piece. Appearance becomes good although the talk of being as how cannot do the engine performance. It is the parenthesis merit which it is [ purchasing this ] free whether lends and there is since concurrent use must not nece

It is a free adjuster piece.
Appearance becomes good although the talk of being as how cannot do the engine performance.
It is the parenthesis merit which it is [ purchasing this ] free whether lends and there is since concurrent use must not necessarily be carried out to the lever made from an antlion, but cannot be referred to as sticking together with the lever made from an antlion not at all! As dress-up parts, they are good parts.
A lever and a color are arranged or changed and coordinates can be enjoyed.
Texture is also good and it is also easier to operate it than an original manufacturer's product. View detail