Reviews
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 90, HONDA Super Cub 90, HONDA little cub, HONDA little cub, HONDA little cub, HONDA little cub, HONDA little cub, HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA BENLY50S, HONDA SUPER CUB70, HONDA CL50
In the Restore of LITTLE CUB
From a friend LITTLE CUB (c50LMY) We got the same number as OEM because Sprocket was SUBBY Rust purchase here. You can not do it without exchanging Rear tire and Chain. Also, if you do not have a motorized Impact wrench, it is easier to loosen 4 Nuts before removing Tire.
I had a hard time with that. I put it on the Hub damper of Rear wheel, I extended it to Socket wrench with Iron Pipe and managed to relax..
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 90, HONDA Super Cub 90, HONDA little cub, HONDA little cub, HONDA little cub, HONDA little cub, HONDA little cub, HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA BENLY50S, HONDA SUPER CUB70, HONDA CL50
Used in CUB reform 105cc
【What made you decide the purchase?】 price
【How was it actually used?】 Quality is better than satisfied with images
【Was it difficult to install? (Hard parts case)】 It was not particularly difficult
【Please tell me the point of installation and hang (in the case of Hard parts)】 The one with the cutting becomes the surface.
[Is there anything I was disappointed about?] None.
【Hope for Manufacturer - Please let me know if there are any improvement points; Please make 30 ~ 34T!
【Have you compared items?】 OEM and Vietnam inexpensive Driven.
[Others]
I bought it with Wa Big and wore it immediately.
Texture is good. I was surprised because I did not expect it.
I feel more precise than I see in the image, I think that this is OK as an OEM replace.
Even if the number of teeth is only 35T, it is not enough, so I wish I could have around 32T if possible.
Speaking of less than 35T there is only 30T of Mukawa river, but the price is nearly doubled..
CUB will become a Final refugee when fiddling. In the centrifugation, the primary reduction ratio can not be changed almost, Missi
It is difficult because I do not have much choice.. (Using the CD90 or 100EX type with relation of Ratio of 1st and 2nd speed
There is only) KITACO Mr. Please make fewer than 35T!
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 90, HONDA Super Cub 90, HONDA little cub, HONDA little cub, HONDA little cub, HONDA little cub, HONDA little cub, HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA BENLY50S, HONDA SUPER CUB70, HONDA CL50
CUB70Replace
I used it for refreshing CUB 70.
Compared to OEM Parts Number, quality is inferior, reliable Manufacturer made and price is cheap.
Sprocket exchange. Or in the case of Chain exchange, let's exchange 3 spots before and after Sprocket and Chain at the same time. If you use a new Chain for the reduced Sprocket, it will grow in no time. The opposite is true.
Three-point replacement is expected to result in longer service life of each part and improvement of fuel economy, and I think part costs and maintenance costs will be lower as well.
Let's also focus on ChainGrease frequently.
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 90, HONDA Super Cub 90, HONDA little cub, HONDA little cub, HONDA little cub, HONDA little cub, HONDA little cub, HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA BENLY50S, HONDA SUPER CUB70, HONDA CL50
No problem with quality
Although it is considerably cheap as Driven Sprocket, vibration and shake etc. even if actually attached. I am running comfortably without.
It is attached to CUB CUSTOM of C50. Before 13 after 44
It is slightly more accelerated than OEM, but the 4th speed has become easier to use.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY BAJA, HONDA GORILLA, HONDA GORILLA
On Setting
I set it at Bore up. It is not necessary to pack Chie's Piece when replacing Sprocket of Front, but please note that Piece stuffing may be necessary when exchanging Rear sprocket. View detail
Fits: HONDA XR50 Motard, HONDA APE 100 TypeD, HONDA APE TypeD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR80, HONDA NSR50, HONDA NSF100, HONDA NS50R, HONDA NS50F, HONDA NS-1
I own an APE100, and used this part when mounting an aluminum rear wheel of another brand.As I had only driven for approximately 6000km, I though it was a little too early for replacement. But since I wanted to avoid the trouble of reinstallation, I b
I own an APE100, and used this part when mounting an aluminum rear wheel of another brand.
As I had only driven for approximately 6000km, I though it was a little too early for replacement. But since I wanted to avoid the trouble of reinstallation, I bought a new one instead.
I bought a part with the same teeth number, so I can use it without changing the setting.
I don't have to replace it for a certain period of time from now.
View detail
Fits: HONDA Ape 100, HONDA GIORCUB, HONDA JAZZ, HONDA CHALY 70, HONDA CHALY 50, HONDA APE 50, HONDA XR80, HONDA XL80, HONDA XL50, HONDA XE75, HONDA XE50, HONDA R&P, HONDA CB50, HONDA MAGNA50, HONDA MONKEY RT, HONDA MOTRA, HONDA Nauty Dax, HONDA DAX70, HONDA DAX, HONDA MONKEY R
I purchased it to replace the sprocket of my Super Cub because it was getting pointed at the end. But was offended to see what I actually got. It was entirely different from the picture shown on the site.Except for mounting holes there were 4
I purchased it to replace the sprocket of my Super Cub because it was getting pointed at the end. But was offended to see what I actually got.
It was entirely different from the picture shown on the site.
Except for mounting holes there were 4 sticks (not sure what to call them) sticking out.
It doesn't mention that it coressponds to Super Cub 50, I know but HONDA 4 minis have sizes nearly the same and parts often can be used universally so I made sure I had the right number of teeth and ordered.
If it was a minor difference, it wouldn't be much problem but to place a picture so different from the actual product isn't fare. The picture should be faithful to the product.
I'm returing it because it is unused but I'm not sure whether the reason of return will be accepted or not. I doubt that they have sent me a different product. I'm sure this is the actual product but they should have posted a correct picture. On the other hand, I am to blame to purchasing the product for a vehicle that was not mentioned in the corresponding list.
But I wish to have all my money back.
I'm giving it 5 stars because it doesn't have anything to do with the quality of the product.
View detail
I mounted this to my vehicle that I call "donkey" to improve its performance in speed. It's for KSR110 but suits K3 wheels nicely. The outer diameter of the wheel hub (mounting base) and inner diameter of the sprocket fit just right. Mounting holes are lo
I mounted this to my vehicle that I call "donkey" to improve its performance in speed. It's for KSR110 but suits K3 wheels nicely. The outer diameter of the wheel hub (mounting base) and inner diameter of the sprocket fit just right. Mounting holes are located in the same position as well. Together with OEM 12T drive sprocket, speed will increase 10km per hour with rotation remaining at low speed.
I recommend it because it is offered at a low price and is easy to purchase. Thanks to this product my donkey has changed to a pony. The one thing that I regret would be that the chain doesn't stretch equally. The shaft angle of the sprocket or circularity may not be precise.
Both sprocket and chain have been replaced so I may be able to find out what7s causing it if I rotate the sprocket 180 degrees. Also I must note that the picture shown at the Webike sight has three holes but the actual product has four. So be careful.
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 90, HONDA Super Cub 90, HONDA little cub, HONDA little cub, HONDA little cub, HONDA little cub, HONDA little cub, HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA BENLY50S, HONDA SUPER CUB70, HONDA CL50
I've exchanged it along with the chain.It wasn't getting sharp but I replaced it because it was getting old. I've using one of the same brand for my APE too, so I knew how it was like.It's good for its price, and I think it will do good if it was
I've exchanged it along with the chain.
It wasn't getting sharp but I replaced it because it was getting old. I've using one of the same brand for my APE too, so I knew how it was like.
It's good for its price, and I think it will do good if it was for setup.
As there aren't so many custom parts for LITTLE CUB, I think this is a precious part.
View detail
SEA BASS; it diverted to the CHOINORI.Since it could not do at the sacrifice of acceleration performance although it was quick to have exchanged a Front sprocket for a second-half type thing, and to have made it a High gear, Rear-sprocket appropriation ex
SEA BASS; it diverted to the CHOINORI.Since it could not do at the sacrifice of acceleration performance although it was quick to have exchanged a Front sprocket for a second-half type thing, and to have made it a High gear, Rear-sprocket appropriation exchange was carried out.In the case of a first half type CHOINORI, it is a Bolt on, but I need your help by self-responsibility. View detail
Since he did not want to sacrifice acceleration performance although there was also the method of making it into a High gear by Front-sprocket exchange, the second-half type moderation ratio of the CHOINORI was used by Rear-sprocket exchange.
Since he did not want to sacrifice acceleration performance although there was also the method of making it into a High gear by Front-sprocket exchange, the second-half type moderation ratio of the CHOINORI was used by Rear-sprocket exchange. View detail
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY BAJA, HONDA GORILLA, HONDA GORILLA
Although it worried with the thing of the Aluminum, ask for durability. For use, I think that it is satisfactory at all. Since it is cheap, it is recommended. If there is a color besides black, in addition, it is good.
Although it worried with the thing of the Aluminum, ask for durability.
For
use, I think that it is satisfactory at all.
Since it is cheap, it is recommended.
If there is a color besides
black, in addition, it is good.
View detail
Fits: HONDA XR50 Motard, HONDA APE 100 TypeD, HONDA APE TypeD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR80, HONDA NSR50, HONDA NSF100, HONDA NS50R, HONDA NS50F, HONDA NS-1
The APE 100 was equipped. Although it was 15 dishes of Front Sprockets, and rear [ 32 dishes of ], since a Shift change was busy, 30 dishes were used. Although satisfactory, however acceleration force fell in the effect ....
The APE 100 was equipped.
Although it was 15 dishes of
Front Sprockets, and rear [ 32 dishes of ], since a Shift change was busy, 30 dishes were used.
Although satisfactory, however acceleration force fell in the
effect ....
View detail
Fits: HONDA XR50 Motard, HONDA APE 100 TypeD, HONDA APE TypeD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR80, HONDA NSR50, HONDA NSF100, HONDA NS50R, HONDA NS50F, HONDA NS-1
It purchases simultaneously with a Front sprocket. It purchased as a got repair part of NS-1. a existing Sprocket is exchange in that of which rusts, front and back rusts, and cannot come out of and use it, but has adhered to in the form
It purchases simultaneously with a Front sprocket.
It purchased as a got repair part of NS-1.
a
existing Sprocket is exchange in that of
which rusts, front and back rusts, and cannot come out of and use it, but has adhered to in the form also with a strange Chain.
The
drive system is decided by Brando who can trust it.
relief is carried out and it can fly.
(It is ... within legal speed.)
View detail
Fits: HONDA XR50 Motard, HONDA APE 100 TypeD, HONDA APE TypeD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR80, HONDA NSR50, HONDA NSF100, HONDA NS50R, HONDA NS50F, HONDA NS-1
[Webike Monitor] Cost-performance highest! Since the mountain is small, it is perfect consumable goods, but T number is also abundant, and since nominal cost and cheap number of sheets required for a Setting can be arranged by one to tw
[Webike Monitor]
Cost-performance highest! Since the
mountain is small, it is perfect consumable goods, but T number is also abundant, and since nominal cost and cheap number of sheets required for a Setting can be arranged by one to two other Manufacturers, it is the highest.
View detail
Fits: HONDA XR50 Motard, HONDA APE 100 TypeD, HONDA APE TypeD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR80, HONDA NSR50, HONDA NSF100, HONDA NS50R, HONDA NS50F, HONDA NS-1
Since this product is iron, and it is somewhat heavy, we cannot recommend it to those who ask for the movement engine performance of a Motorcycle finely, but it is a thing of the grade which is this price, and is goods in which a good person has an effect
Since this product is iron, and it is somewhat heavy, we cannot recommend it to those who ask for the movement engine performance of a Motorcycle finely, but it is a thing of the grade which is this price, and is goods in which a good person has an effect very much, and Sprocket exchange becomes indispensable depending on a Circuit. I have this product briefly from 34 dishes to 44 dishes. If there is nothing that much, in a Circuit, it cannot run happily. 33 to about 38 dishes are using it for an APE 100 etc. Since the Steel Sprocket lasts long, it thinks that it is quite good!! View detail
Fits: HONDA Ape 100, HONDA GIORCUB, HONDA JAZZ, HONDA CHALY 70, HONDA CHALY 50, HONDA APE 50, HONDA XR80, HONDA XL80, HONDA XL50, HONDA XE75, HONDA XE50, HONDA R&P, HONDA CB50, HONDA MAGNA50, HONDA MONKEY RT, HONDA MOTRA, HONDA Nauty Dax, HONDA DAX70, HONDA DAX, HONDA MONKEY R
[Webike Monitor] The Sprocket was exchanged in order to carry out the Bore up of the APE 50 to 80 cc this time [ ]. It changed into 34T to a authentic positive one being 46T. It becomes easy to run very and is large satisfacti
[Webike Monitor] The
Sprocket was exchanged in order to carry out the Bore up of the APE 50 to 80 cc this time [
].
It changed into
34T to a
authentic positive one being 46T.
It becomes easy to run very and is large satisfaction.
Since the die length of the
Chain changes, it is necessary to purchase to
1 clue or to do
preparation of a Chain cutter.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY BAJA, HONDA GORILLA, HONDA GORILLA
When a 16-cm LONG SWING ARM was used, since the Chain had interfered, it was used. It ceased to interfere by F16T R35T. Since it was a price which is easy to purchase, various combination was able to be tried.
When a 16-cm LONG SWING ARM was used, since the Chain had interfered, it was used.
It ceased to interfere by F16T R35T.
Since it was a price which is easy to purchase, various combination was able to be tried.
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 90, HONDA Super Cub 90, HONDA little cub, HONDA little cub, HONDA little cub, HONDA little cub, HONDA little cub, HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA BENLY50S, HONDA SUPER CUB70, HONDA CL50
Since he bought an inner CUB90 with medieval times, 40 dishes of R Sprockets were attached. which is the reason Low-geared-ized, so that the former Owner thought the milk dealer ? since F Sprocket was 15 dishes of a NORMAL (advance going up is e
Since he bought an inner CUB90 with medieval times, 40 dishes of R Sprockets were attached.
which is the reason Low-geared-ized, so that the former Owner thought the milk dealer ? since
F Sprocket was 15 dishes of a NORMAL (advance going up is early and is troubled also as standard) -- simultaneously, F Sprocket was also changed into 16 dishes and became an ordinary feeling now well.
It compares pure and is slightly light.
Although it is not a reason as what changes how since it is a CUB ...
View detail
Since a hole position is the same as the first half type of a CHOINORI, it diverts. It was an Exactly.
Since a hole position is the same as the first half type of a CHOINORI, it diverts. It was an Exactly. View detail