Is not it good?.

At the time of Carbonuretor setting of FTR, I bought it thanks to D type peculiar to Honda car.
accuracy - Usability, especially nothing to complain about.
I just do not bother to buy it, it's not that cheap... View detail

I tried to buy it...

I bought it for use in LITTLE CUB. It is impossible from the hole of Leg shield. You can not use it unless you remove the Leg shield. Should be short.. View detail

CUB 90 after exhaust gas regulation

CUB 90 after exhaust gas regulation, the shape of screw head of Pilot screw is
"-" Not "D" , It is impossible to use normal Driver.
I need a special tool.

Because I felt the bluntness of the battle, I tried to raise the setting by darkening it.
I was able to use it without problems, I was able to experience more than expected effect.
After regulation CUB 90, it is a power up method with high Cost performance.

However, it is necessary to remove Leg shield for use.
There are sides that can not be helped because it is a product that corresponds to various car models,
If the total length was short, I could work without removing the Leg shield.

Since it was easy to use if you could adjust the length,
It was a bit strict ☆ X4,
Depending on the car model ☆ X5 product. View detail

DAYTONA Honda Pilot Screw Adjusting Tool

AB27 MONKEY regulation purchased to regulate carburetor Air. There was also a cheap one made abroad, but made a reliable domestic Manufacturer. I was also solid and able to adjust easily. I am satisfied.. View detail

DAYTONADAYTONA HONDAPilot screw adjustment

It is a necessary tool to adjust Pilot screw with APE 100. Because some place to adjust is D type, adjustment is impossible without this tool so we purchased.
If the adjustment point is + type, you can do with Phillips Screwdriver but because it does not come true with APE 100, is not it APT 100 riding person is a necessary tool?
Because the price is also affordable, we recommend that you purchase one as it expands the width of Motorcycle messing. View detail

Although it is a problem by the side of HONDA, since the position of the hole of the thing of PJ passed a little along the top and the outer frame of an Air cleaner has a small drawing-in portion of a Gasoline Tube, it adjusts dramatically and is hot.

Although it is a problem by the side of HONDA, since the position of the hole of the thing of PJ passed a little along the top and the outer frame of an Air cleaner has a small drawing-in portion of a Gasoline Tube, it adjusts dramatically and is hot. View detail

[Webike Monitor] They are Pilots, such as the CUB and an APE, and a tool required for Air-Screw adjustment. It does not make a selling point of the ordinary tool stores, and purchasing in a Motorcycle article store or a Net only occurs. When a

[Webike Monitor] They are Pilots, such as the
CUB and an APE, and a tool required for Air-Screw adjustment.
It does not make a selling point of the ordinary tool stores, and purchasing in a Motorcycle article store or a Net only occurs. When a Motorcycle article store is not closely alike, we recommend you the purchase here. View detail

It purchased for adjustment of a CARBURETOR. although it is convenient that adjustment is possible, without removing -- a thing with the insufficient depth of a Socket -- slid and idled. If it is more easy to turn, I will

It purchased for adjustment of a CARBURETOR. although it is convenient that adjustment is possible, without
removing -- a thing with the insufficient depth of a Socket -- slid and idled.
If it is more easy to turn, I will think that it was good. View detail

[Purchase motive] It has ridden on and LittleCub ('05). the time of and Plug check -- a Plug -- since it was deep-black, it was the adjustment groove which adjusted the Pilot screw, thought that would make it into thinness, and resembled t

[Purchase motive] It has ridden on
and LittleCub ('05). the time of

and Plug check -- a Plug -- since it was deep-black, it was the adjustment groove which adjusted the Pilot screw, thought that would make it into thinness, and resembled the form of D of the alphabet unlike きや and the Slotted-screwdriver slot of an ordinary Motorcycle. If it investigates,
and D type Screw only for an emission control vehicle are known, This product DAYTONA:HONDA Pilot-screw adjusting-tool product number: Vehicle type HONDA / MONKEY 00 corresponding to 37564 merchandise information : DI0 [LIVE-DIO ] Details of goods, such as 00. ■ A Driver type. (230 mm in overall length) an instruction manual -- here Straight type only for a Honda emission control vehicle (D type) Straight type for Air Screws Exclusive adjusting tool which united the purchase of the Hand cleaner with the Air-Screw form (D type) of the HONDA here emission control vehicle. -- it is purchase.
-- [the feature
of goods], etc. and ordinary adjusting tools -- the expensive version has a working scale etc. by one fourth or 1/8 unit just for a moment so that it may be easy to grasp what rotation 戻した it is, but this is a Driver free [ D type ] in a tip. Since this product had die length as long as 230 mm as
and a photograph, the Leg shield of the CUB had to be pushed in and interference with this product had to be avoided. Since it adjusted, it was good. The
[grading of goods]
and the goods itself are the raw materials appropriate for the product made of a Duralumin, and it is a thing [ like hard iron (STAINLESS STEEL ?) ] only whose D type portion at a tip is, out of which it is likely to come and which is felt, and is used for a long time. Since a thing is comparatively more expensive in it being past
and merit, it is *3 つ. View detail

Although there is a high grade feeling by firm structure, since there is no turn not much at a Normal cab, I am a little simple-like and hope that a price is cheap. In addition, since it interferes with a Frame and cannot turn well, cautions are required

Although there is a high grade feeling by firm structure, since there is no turn not much at a Normal cab, I am a little simple-like and hope that a price is cheap. In addition, since it interferes with a Frame and cannot turn well, cautions are required as it is. View detail

The knurl process of the grip part is solid and it is easy-to-use. Although it was used by XR230, it cannot work, unless it removes a carburetor main part, since the Frame is obstructive. If there is a Type with a flexible ROD portion, I will think

The knurl process of the grip part is solid and it is easy-to-use. Although it was used by
XR230, it cannot work, unless it removes a carburetor main part, since the Frame is obstructive. If there is a Type with a flexible ROD portion, I will think that it is the best. View detail

It is used by the normal cab of FTR223. They are certainly required sometimes custom tools, such as air cleaner & muffler exchange, by a HONDA vehicle. Even if a price is also privately handy and it is sometimes had and saved, a bad thing does not

It is used by the normal cab of FTR223.
They are certainly required sometimes custom tools, such as air cleaner & muffler exchange, by a HONDA vehicle.
Even if a price is also privately handy and it is sometimes had and saved, a bad thing does not have anything.
It is used putting the red mark on one place so that it may not mistake how much it turned in my case.
Of course, evaluation is a five stars!! View detail

I think that this price is somewhat high with one stick. Although the surroundings of the pilot screw might be an advantage at those confused, since the goods themselves were long, it was thought that working efficiency was bad.

I think that this price is somewhat high with one stick.
Although the surroundings of the pilot screw might be an advantage at those confused, since the goods themselves were long, it was thought that working efficiency was bad. View detail

Since the condition of after fire had appeared when changing the muffler of APE100TYPED, he bought this product, in order to adjust an air screw. I of the super-amateur was also able to treat satisfactorily. The air screw has also been adjusted.

Since the condition of after fire had appeared when changing the muffler of APE100TYPED, he bought this product, in order to adjust an air screw.
I of the super-amateur was also able to treat satisfactorily.
The air screw has also been adjusted.
The kana in which 2100 yen is slightly high is four stars in things. View detail

It was used for regulation of XR250. Since he thinks that it is required for a honda system motorcycle, Ho of a honda vehicle wants to have.

It was used for regulation of XR250.
Since he thinks that it is required for a honda system motorcycle, Ho of a honda vehicle wants to have. View detail

After A.I. Artificial Intelligence cancellation of XR250, since adjustment of the throw was required, it purchased. In the HONDA car which has adopted D type, they are necessaries. I extract a pilot screw with this adjusting tool, and think that u

After A.I. Artificial Intelligence cancellation of XR250, since adjustment of the throw was required, it purchased.
In the HONDA car which has adopted D type, they are necessaries.
I extract a pilot screw with this adjusting tool, and think that use by a slotted screwdriver can also be performed by making a cut in a minus.
use which -- this tool is required. View detail

Since it was a tool which must be in adjustment of the air screw of the ape 100, it purchased. Knurling of aluminum is performed and it is easy to grasp a grip part. The tip is the form which catches the character of D and can ensure adjustment of

Since it was a tool which must be in adjustment of the air screw of the ape 100, it purchased.
Knurling of aluminum is performed and it is easy to grasp a grip part.
The tip is the form which catches the character of D and can ensure adjustment of a screw.
Why did the manufacturer (honda) use such form? It is a question.
Although it will be an unnecessary tool like the conventional carburetor if it can adjust by minus .....
According to a season, the throw needs to be adjusted and changes also with the climate conditions of the place which rides.
It is a tool which needs to be purchased if the pure carburetor is used by the ape.
Let's call it a recommend, or since it is required, purchase. View detail

He bought APE100. He got carried away, and although the insulator was removed, a throw is thin and adjustment is needed. However, the pilot screw of APE100 cannot be turned with a driver! He bought this product confusedly. However, since a scr

He bought APE100.
He got carried away, and although the insulator was removed, a throw is thin and adjustment is needed.
However, the pilot screw of APE100 cannot be turned with a driver! He bought this product confusedly.
However, since a screw was in a car body inner side in APE, the kana which cannot be used the way things stand was thought, but it was able to adjust well, pushing a carburetor with GYUTSU. View detail