Reviews
For oil temperature sensor installation!
It is a necessity for oil temperature sensor installation.:It is aluminum, but it is solidly made and seems to be durable. View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200R, YAMAHA XJR1200, YAMAHA V-MAX 1200
Oil temperature sensor
YOSHIMURAPROGRESS2Multi-temp meter is installed on CB400Four.
If the sensor is attached to the oil drain bolt, it must be removed every time the oil is changed.
I bought this one because the sensor is taken from the PassCap under the Point cover.
Sensors are
Sensor Type-C for PRO-GRESS is compatible.
View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB150R, HONDA REBEL500, Others , HONDA REBEL250, YAMAHA CYGNUS X, HONDA CB250R, HONDA CB250R, HONDA CB125R
For Oil Temperature Meter Installation
Used to install DAYTONA AQUAPROVAOil Temperature Meter.
Remarks… Use the one that matches your car model and Sensor fittingSize.
View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB150R, HONDA REBEL500, Others , HONDA REBEL250, YAMAHA CYGNUS X, HONDA CB250R, HONDA CB250R, HONDA CB125R
Used for AquaPROva Oil Temperature MeterFitting
Oil Temperature MeterDrain bolt is indispensable for fitting. No problem for installation since it is specially designed for this purpose. It may be better to purchase several for long-term use and deterioration. View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB150R, HONDA REBEL500, Others , HONDA REBEL250, YAMAHA CYGNUS X, HONDA CB250R, HONDA CB250R, HONDA CB125R
Oil temperature sensor screw
Use model honda supercub 50 2009. It should be noted that the sensor is divided into two parts. It needs to be purchased separately from the heat transfer probe and needs to be used with a daytona special probe. The probe wire groove terminal and the oil temperature electronic meter terminal use the daytona oil temperature sensor screw. There is no oil leakage failure. Use model honda supercub 50 2009 Need to pay attention to the sensor is divided into two parts, separately from the heat transfer probe to buy Need to be used with daytona special probe, probe slot terminal and oil temperature electronic watch terminal No oil leakage occurred with daytona oil temperature sensing screw(translated by Google Translator) View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB150R, HONDA REBEL500, Others , HONDA REBEL250, YAMAHA CYGNUS X, HONDA CB250R, HONDA CB250R, HONDA CB125R
The price is just right
I bought this for the connection of the Daytona AquaClover hot water thermometer
Installation is finished only by replacing it with a NORMAL DRAIN bolt, but it is not necessary to replace the hot water thermometer's After removing Wiring of the thermometer because Wiring is connected to the Drain bolt, it is not necessary to remove the Wiring of the thermometer If you don't have it, the cord will be disconnected because it will go round and round After removing the Terminal, put the Wiring together with the Drain bolt on the Round and You have to turn it round and take it off
View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB150R, HONDA REBEL500, Others , HONDA REBEL250, YAMAHA CYGNUS X, HONDA CB250R, HONDA CB250R, HONDA CB125R
Excellent compatibility with DAYTONAMeter
I used it to use DAYTONA AQUAPROVA EZ Temp meter.
As Fitting
Purchase. It is a good item. Various Size etc. are prepared for Sensor.
Not only for car models but also Universal Product can be used for wide range of vehicles.
Is it a sensor or instruments?
The temperature is more accurate than other Manufacturer and Sensor does not get in from other companies
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200R, YAMAHA XJR1200, YAMAHA V-MAX 1200
Purchase Set
I purchased DAYTONA AQUAPROVA HG Thermometer and Bracket and bought it with Set to take oil temperature.
Material : Since it is not Aluminum, it is good that you do not have to worry about breaking.
View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB150R, HONDA REBEL500, Others , HONDA REBEL250, YAMAHA CYGNUS X, HONDA CB250R, HONDA CB250R, HONDA CB125R
Sensor will be covered by Fitting but there is no problem.
When measuring oil temperature from Drain bolt, the head of Sensor was buried in Fitting and I was worried that the correct temperature could be measured,
When I tried it with a rod Thermometer, there was almost no error.
Also, as Bolt's head is tall, I also highly appraise that I can hold it firmly with a Spanner and turn it.
If there is only dissatisfaction point, it is the selling price.
It is too high..
If you do not treat it carefully, it will cause you to buy again, so be careful.
View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB150R, HONDA REBEL500, Others , HONDA REBEL250, YAMAHA CYGNUS X, HONDA CB250R, HONDA CB250R, HONDA CB125R
Manufacturer Purchase with consistent reliability
Purchased for installation of AQUAPROVA HG Thermometer.
Because it is made of the same DAYTONA, Fitting with Sensor is used for Oil drain in patch but Oil leak - No bleeding.
It feels a bit expensive compared to other manufacturers, but I think that it is reasonable if it thinks Manufacturer's assortment of security fee Gold.
View detail
Fits: SUZUKI VOLTY, SUZUKI VOLTY, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI GOOSE250, SUZUKI GOOSE250, SUZUKI GSX400, SUZUKI GSX400, SUZUKI TL1000S, SUZUKI TL1000S
To install Oil Temperature Gauge.
I was planning to install it in Drain, but found a Service hole in the Oil Filter section. Moreover, it is attached to that same size as Drain.
The model is GSX-R 400 (GK73A)
View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB150R, HONDA REBEL500, Others , HONDA REBEL250, YAMAHA CYGNUS X, HONDA CB250R, HONDA CB250R, HONDA CB125R
High quality and reliable!
As Fitting for DAYTONA's EZTemp meter
Purchase. It is a good item. Various Size etc. are prepared for Sensor.
Not only for car models but also Universal Product
Can be used for a wide range of vehicles. The Sensor's Size is
I think that another company's Meter can be installed.
Although it is plain Parts, the quality of Fitting is quite Large when it is considered quality at Total.
In that sense this product is of high quality
I think that it is satisfactory..
View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB150R, HONDA REBEL500, Others , HONDA REBEL250, YAMAHA CYGNUS X, HONDA CB250R, HONDA CB250R, HONDA CB125R
It purchased in order to attach an Aqua prober with make ZEPHYR chi in 2001.It is a question to the conformity table of a Size.In a conformity table, although ZEPHYR chi is M18xP1.5, it is an error.In practice, it is M12xP1.5.Please give me correction!
It purchased in order to attach an Aqua prober with make ZEPHYR chi in 2001.It is a question to the conformity table of a Size.In a conformity table, although ZEPHYR chi is M18xP1.5, it is an error.In practice, it is M12xP1.5.Please give me correction!
If I attach a temperature sensor for an external Muffler, the code will have touched the Muffler.since -- the code was bent, and and it has protected. [ heat resistance ] [ cloth ]Those who are doing Muffler exchange are cautions.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200R, YAMAHA XJR1200, YAMAHA V-MAX 1200
XJR1300 Blue Electronic-flash '05 It is attachment. Since attachment constructs this Fitting and Sensor and only attaches them to the mounting hole for the Sensors by the side of a car body as it is, it is easy. Although it is individually worrisome
XJR1300 Blue Electronic-flash '05 It is attachment.
Since
attachment constructs this Fitting and Sensor and only attaches them to the mounting hole for the Sensors by the side of a car body as it is, it is easy.
Although it is individually worrisome that the
color is a Gold, it is satisfactory in price.
View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB150R, HONDA REBEL500, Others , HONDA REBEL250, YAMAHA CYGNUS X, HONDA CB250R, HONDA CB250R, HONDA CB125R
[Webike Monitor] It purchases in order to attach to the GORILLA. The reason about which it worried with Mukawa is wiring of the Sensor which hangs down from a Drain bolt. Although it came out horizontally, Mukawa was accurate and it carried
[Webike Monitor] It purchases in order to attach to the
GORILLA.
The reason about which it worried with
Mukawa is wiring of the Sensor which hangs down from a Drain bolt.
Although it came out horizontally,
Mukawa was accurate and it carried out it without a lack right [ that ] and a voltmeter here.
That wiring is unrefined although it is [ more than half ] responsible for the
Honda.
Since モンゴリ still has only this, it bears.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200R, YAMAHA XJR1200, YAMAHA V-MAX 1200
DAYTONA It is required to attach a Digital temp meter. There is nothing that there is a BALI in if especially structure is bad entirely. Since the Gasket is also attached, the newly prepared thing is not needed.
DAYTONA It is required to attach a Digital temp meter.
There is nothing that there is a BALI in if especially structure is bad entirely.
Since the
Gasket is also attached, the newly prepared thing is not needed.
View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB150R, HONDA REBEL500, Others , HONDA REBEL250, YAMAHA CYGNUS X, HONDA CB250R, HONDA CB250R, HONDA CB125R
It purchases in order to attach the oil temperature gauge of an auto gauge. Although the sensor assemblies of the auto gauge were PT1/8, they have been perfectly attached with this product of R1/8. Since the drain washer is also attached, isn't a
It purchases in order to attach the oil temperature gauge of an auto gauge.
Although the sensor assemblies of the auto gauge were PT1/8, they have been perfectly attached with this product of R1/8.
Since the drain washer is also attached, isn't a few virtue?
View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB150R, HONDA REBEL500, Others , HONDA REBEL250, YAMAHA CYGNUS X, HONDA CB250R, HONDA CB250R, HONDA CB125R
It exchanged for the pure oil drain bolt, and attached. The combined sensor is 49135 of the company. Since there is head height of a bolt, what it is hard to lick at the time of removal is good. Since it protrudes very well also including the
It exchanged for the pure oil drain bolt, and attached.
The combined sensor is 49135 of the company.
Since there is head height of a bolt, what it is hard to lick at the time of removal is good.
Since it protrudes very well also including the part of a sensor or wiring as compared with a pure bolt, I consider that it is better to check whether the clearance of enough of an attaching part occurs before purchase.
View detail
Fits: SUZUKI VOLTY, SUZUKI VOLTY, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI GOOSE250, SUZUKI GOOSE250, SUZUKI GSX400, SUZUKI GSX400, SUZUKI TL1000S, SUZUKI TL1000S
It purchased in order to attach an oil temperature sensor to 09DR650SE. Although it was due to attach to the engine lower oil gallery, since an oil temperature sensor is so, it has been attached to the engine upper part by this fitting being large and
It purchased in order to attach an oil temperature sensor to 09DR650SE.
Although it was due to attach to the engine lower oil gallery, since an oil temperature sensor is so, it has been attached to the engine upper part by this fitting being large and a drilling process being needed for an engine guard.
Although the oil temperature gauge was a product made from a takegawa, it has been attached without the problem.
View detail